The Back-UPS CS provides professional-grade power protection for office & home office systems. Battery powered & surge protected power outlets, built-in phone/fax/modem line (DSL compatible) protection, safe system shutdown software with sophisticated power management features & pro-active audio-visual status indicators ensure office systems & their valuable data are protected from dangerous power surges, spikes & blackouts. Easy access to a hot-swappable, user-replaceable battery also makes servicing the Back-UPS CS hassle-free. These features along with its classic styling make the Back-UPS CS a perfect choice for protecting your important office & home office systems. USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Serial Connectivity Provides management of the UPS via a serial port. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Audible alarms Provides notification of changing utility power & UPS power conditions LED status display Quickly understand unit & power status with visual indicators. For replacement battery please see QF 2983. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

USB connection Use your PC to access additional power protection & management features for your UPS via a USB (Universal Serial Bus) Port. Telephone dataline surge protection Provides protection of connected equipment from power surges traveling on telephone lines. Automatic Voltage Regulation (AVR) Automatically steps up low voltage & steps down high voltage to levels that are suitable for your equipment. Protection Battery & surge protected outlets Back up & protect your hardware & data during power outages, surges & spikes. Surge only outlets Protect secondary electronics from surges & spikes without reducing battery power used to run primary electronics during an outage. Availability Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Serviceability Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Manageability Audible alarms Provides notification of changing utility power & UPS power conditions LED status display Quickly understand unit & power status with visual indicators. Safety Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. ...

APC Back-UPS HS 500 is a compete management & power protection solution for structured wiring & home networking applications. It provides the flexibility to remotely manage the UPS & control the outlets via Web browser. For the replacement battery please see Quick Find 2983. ...

APC's Back-UPS 1400 protect your electronic equipment from damage due to power outages, surges & spikes while providing short term battery power during an outage. The Back-UPS 1400 features Automatic Voltage Regulation (AVR), which instantly adjusts high & low voltage fluctuations to safe levels for your electronics, saving battery power for when you need it most during storms & power outages. in addition, Australian sockets make for easy-to-use connection of protected equipment. Specifically designed to protect your PC equipment & network connection in harsh power environments, the Back-UPS 1400 ensures maximum productivity & work efficiency. ...

The Back-UPS family offers guaranteed power protection for wireless networks, computers, gaming consoles & other electronics in your home or business. Models supply battery backup during outages & unsafe voltage fluctuations, as well as provide protection from damaging surges & spikes. ...

The Back-UPS Pro provides abundant battery backup power, so you can work through medium & extended length power outages. It safeguards your equipment against damaging surges & spikes that travel along utility & data lines. The Back-UPS Pro also features automatic voltage regulation (AVR), which instantly adjusts high & low voltages to safe levels, so you can work indefinitely during brownouts & overvoltages. The Back-UPS Pro also

Includes:: unique "green" features, automatically turn off idle peripherals. A high efficiency charging system & "AVR Bypass" also reduce power consumption. With the rest of the Back-UPS Pro's standard features, this is the perfect unit to protect your productivity from the constant threat of bad power & lost data. Key Features Input Voltage
- AC 230 V Frequency Required
- 50/60 Hz Input Connector (s)
- Power IEC 320 EN 60320 C14 Power Capacity
- 865 Watt / 1500 VA Remote Management Interface
- RS-232, USB (Universal Serial Bus) Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Power-saving outlets Automatically cuts power to idle equipment to conserve electricity. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Extendable Run Time Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure. Battery-protected & surge-only outlets Reserves power capacity & run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power. Dataline Surge Protection Provides protection of connected equipment from power surges on the data lines. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power & UPS power conditions User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Serial Connectivity Provides management of the UPS via a serial port. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Building Wiring Fault Indicator This LED informs users of potentially dangerous wiring problems in the wall circuit. Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR). LCD graphics display Text & mimic diagrams that display modes of operation, system parameters & alarms. For the Replacement Battery please see QF 482013. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.






...

Reduces or eliminates bulky transformers resulting in lighter units for ease of handling. Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Automatically cuts power to idle equipment to conserve electricity.8 outlet models offer dedicated space to accommodate wide transformer blocks without covering adjoining outlets & 2 always on outlets. You can plug 8 power cords including 3 transformers at the same time. In case you have equipment that has to stay on all the time, such as fax machine, you can plug it in always on outlets. The equipment will be protected & will have power supply even when the unit is switched off. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Power-saving outlets Automatically cuts power to idle equipment to conserve electricity. Battery-protected & surge-only outlets Reserves power capacity & run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power. Dataline Surge Protection Provides protection of connected equipment from power surges on the data lines. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Audible alarms Provides notification of changing utility power & UPS power conditions User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR). LCD graphics display Text & mimic diagrams that display modes of operation, system parameters & alarms. Automatic Voltage Regulation (AVR) Automatically steps up low voltage & steps down high voltage to levels that are suitable for your equipment. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Power-saving outlets Automatically cuts power to idle equipment to conserve electricity. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Battery-protected & surge-only outlets Reserves power capacity & run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power. Dataline Surge Protection Provides protection of connected equipment from power surges on the data lines. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power & UPS power conditions User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Serial Connectivity Provides management of the UPS via a serial port. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR). LCD graphics display Text & mimic diagrams that display modes of operation, system parameters & alarms. For the replacement battery please see Quick Find 283899. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

APC Back-UPS Pro, 720 Watts / 1200 VA, Input 230V / Output 230V, Interface Port DB-9 RS-232, USB (Universal Serial Bus) For the Replacement Battery please see QF 482013. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Power-saving outlets Automatically cuts power to idle equipment to conserve electricity. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Battery-protected & surge-only outlets Reserves power capacity & run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power. Dataline Surge Protection Provides protection of connected equipment from power surges on the data lines. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power & UPS power conditions User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Serial Connectivity Provides management of the UPS via a serial port. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR). LCD graphics display Text & mimic diagrams that display modes of operation, system parameters & alarms. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

APC BE550G-UK Power-Saving Back-UPS ES 550VA UPS With 8 Outlets Features Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Battery-protected & surge-only outlets Reserves power capacity & run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Dataline Surge Protection Provides protection of connected equipment from power surges on the data lines. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power & UPS power conditions User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR). Protection Battery & surge protected outlets Back up & protect your hardware & data during power outages, surges & spikes. Surge only outlets Protect secondary electronics from surges & spikes without reducing battery power used to run primary electronics during an outage. Availability Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Serviceability Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Manageability Audible alarms Provides notification of changing utility power & UPS power conditions LED status display Quickly understand unit & power status with visual indicators. Safety Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.
Includes:: CD with software, Telephone Cable, User Manual
...