APC Smart-UPS, 1980 W/2200 VA, Input 230V/ Output 230V, Interface Port Smart Slot, USB (Universal Serial Bus), Extended runtime model, 2U Rack Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. For the Replacement Battery please see QF 484258. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

APC Smart-UPS, 1980 Watts / 2200 VA, Input 230V / Output 230V, Interface Port USB (Universal Serial Bus), Rack Height 2U Key Features Max Configurable Power
- 1980 Watts / 2200 VA Nominal Output Voltage
- 230V Output Connections
- (8) IEC 320 C13/ (1) IEC 320 C19/ (3) IEC Jumpers Input Connections
- British BS1363A/IEC-320 C20/ Schuko CEE 7/EU1-16P Input Frequency
- 50/60 Hz +/- 3 Hz (auto sensing) Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Predictive replace battery date Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Sequenced shutdown & restart Configure select outlet groups to shut down & turn on in a pre-determined order (for UPSs with switched outlet groups). Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding. Struxure Ware Central compatible Enables centralized management via Struxure Ware Central. High online efficiency Reduces utlility costs, generates less heat. Smart Slot Customize UPS capabilities with management cards. Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. For the replacement battery please see Quick Find 89768. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.




...

APC Smart-UPS, 2700 Watts / 3000 VA, Input 230V / Output 230V, Interface Port Smart Slot, USB (Universal Serial Bus) Key Features Max Configurable Power
- 2700 Watts / 3000 VA Nominal Output Voltage
- 230V Input Frequency
- 50/60 Hz +/- 3 Hz (auto sensing) Output Connections
- (8) IEC 320 C13/ (1) IEC 320 C19/ (2) IEC Jumpers Input Connections
- IEC-320 C20/ Schuko CEE 7 / EU1-16P/ British BS1363A Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Predictive replace battery date Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding. Struxure Ware Central compatible Enables centralized management via Struxure Ware Central. High online efficiency Reduces utlility costs, generates less heat. Smart Slot Customize UPS capabilities with management cards. Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Sequenced network shutdown & reboot Customize network shutdown & reboot sequence of connected servers & UPSs. For the replacement battery please see Quick Find 124898. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.




...

APC award-winning Smart-UPS provides intelligent & efficient network power protection. It is ideal for servers, point-of-sale, routers, switches, hubs & other network devices. The Smart-UPS is trusted to protect critical data & equipment from power problems by supplying clean & reliable network-grade power. In addition to legendary reliability & manageability, Smart-UPS have extremely high efficiency at low, medium & high load levels making them ideal for today's multi-core or virtualized servers that have varying load consumption. For the replacement battery please see Quick find 89768. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

APC Smart-UPS protects your data by supplying reliable, network-grade power in either traditional Tower or Rack-optimized form factors for space constrained business critical applications. Award winning APC Smart-UPS is the perfect UPS for protecting business critical fileservers (Intel or UNIX based), minicomputers, network switches & hubs, Point of Sale, retail/bank back office & ATMs. Rack Mount versions are the choice for rack optimized servers, server appliances, blade servers, other blade devices & rack-mounted network switches & hubs. With included Power Chute management software for servers & workstations, IT administrators can provide safe system shutdown & advanced UPS management (all major operating systems supported). Additional manageability is available through the Smart Slot, an internal accessory slot that means that you can install optional accessories to enhance the performance of your UPS. Network connection with Web browser management and/or environmental monitoring, serial port expansion, & out-of-band management options are available. With pure sine-wave output ensuring compatibility with all connected devices, Intelligent Battery Management ensuring a highly available UPS & an advanced 16 segment bar graph display ensuring information & management, the Smart-UPS is a UPS you can count on. For the replacement battery please see Quick Find 76418. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

APC Smart-UPS, 500 Watts / 750 VA, Input 230V / Output 230V, Interface Port RJ-45 Serial, Smart Slot, USB (Universal Serial Bus), Rack Height 2 U Key Features Max Configurable Power
- 500 Watts / 750 VA Nominal Output Voltage
- 230V Input Frequency
- 50/60 Hz +/- 3 Hz (auto sensing) Output Connections
- (4) IEC 320 C13/ (2) IEC Jumpers Input Connections
- IEC-320 C14 Features Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Predictive replace battery date Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding. High online efficiency Reduces utlility costs, generates less heat. Smart Slot Customize UPS capabilities with management cards Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature Availability Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. Manageability Network manageable Provides remote power management of the UPS over the network. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit & power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Disconnected battery notification Warns when a battery is not available to provide backup power. Serviceability User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Resettable circuit breakers Enables a quick recovery from overload events. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Adaptability Adjustable voltage-transfer points Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.
Includes::CD with software, Documentation CD, Installation guide, Rack Mounting support rails, Smart UPS signalling RS-232 cable, USB (Universal Serial Bus) cable For the replacement battery please see Quick find 283899. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.





...

APC Smart-UPS SUA5000RMI5U Rackmount UPS
- USB/ Serial + Powerchute Software APC Smart-UPS protects critical data by supplying
...

APC Smart-UPS, 700 Watts/1000 VA, Input 230V/ Output 230V, Interface Port RJ-45 Serial, Smart Slot, USB (Universal Serial Bus), Rack Height 2U Key Features Device Type
- UPS
- rack-mountable Networking
- RS-232, USB (Universal Serial Bus) Rack Size
- 2U Input Voltage
- AC 230 V Output Connector (s)
- 4 x power IEC 320 EN 60320 C13 APC award-winning Smart-UPS is the most popular UPS in the world for servers, storage & networks. Trust to protect critical data & equipment from power problems by supplying clean & reliable network-grade power. In addition to legendary reliability & manageability, Smart-UPS have extremely high efficiency at low, medium & high load levels making them ideal for today's multi-core or virtualized servers that have varying load consumption. Smart-UPS series have long been considered the benchmark for all network & server UPS's. Smart-UPS feature a 16-segment LED display, extended range automatic voltage regulation (AVR), & pure sine wave output on battery. Features Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Predictive replace battery date Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding. High online efficiency Reduces utlility costs, generates less heat. Smart Slot Customize UPS capabilities with management cards Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature Availability Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. Manageability Network manageable Provides remote power management of the UPS over the network. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit & power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Disconnected battery notification Warns when a battery is not available to provide backup power. Serviceability User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Resettable circuit breakers Enables a quick recovery from overload events. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Adaptability Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.
Includes::CD with software, Documentation CD, Installation guide, Rack Mounting support rails, Smart UPS signalling RS-232 cable, USB (Universal Serial Bus) cable For the replacement battery please see Quick Find 486884. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.






...

APC Smart-UPS RT is a family of high-density, performance UPSs for voice & data networks, medical labs, & light industrial applications. 6U form factor allows standardization across multiple applications. High power internal chargers allow virtually unlimited additional matching battery packs to comply with aggressive runtime demands of business-critical systems. Customers with harsh power environments looking for extremely tight voltage & frequency regulation, internal bypass, & input power factor correction typical of double conversion online topology will get them in the Smart-UPS RT. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

APC Smart-UPS, 600 Watts /1000 VA, Input 230V / Output 230V, Interface Port USB (Universal Serial Bus) Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. LCD Status Display Provides key UPS status at a glance. Multiple status indicators with load & battery bar graphs. High online efficiency Reduces utlility costs, generates less heat. Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. ...