More From Contributor

Upgraded high torque motors allow it to support a wider range of cameras, resist high winds & G-forces caused when mounted to a car & keep it moving smoothly in flight. ...

Available

Use the Ready Rig Quick Connector to connect a Ready Rig & Ronin 2 Grip or other devices with a tube diameter of 25 mm or 30 mm. ...

Available

The RED Power Cable powers a RED camera by connecting the DC IN port on the camera to the 14.4V Accessory Power Port on Ronin 2's tilt axis. ...

Available

The RED RCP Control Cable controls a RED camera by connecting the CTRL port on the camera to the RSS Port on Ronin 2's Power Hub. ...

Available

The RED Straight Power Cable powers a RED camera by connecting the LEMO port on the camera to the 14.4V Accessory Power Port on the Ronin 2. ...

Available

The SDI IN Cable receives communication from a camera by connecting the SDI IN port on Ronin 2 to the SDI OUT port on the camera. ...

Available

The SDI OUT Cable sends communication by connecting the SDI OUT port on Ronin 2 to the SDI IN port on the monitor or video link. ...

Available

The Ronin 2 Thumb Controller is compatible with the Ronin 2 gimbal & provides an easy way to control the gimbal's pan, tilt, & roll axis movements. ...

Available

Mount the Tilt Axis Extender on the Ronin 2's tilt axis for camera installation. ...

Available

Mount the Top Accessory Mounting Plate & Camera Top Cross Bar to the top of the camera to attach it to the Ronin 2 gimbal. The mounting plate’s 1/4"-20 mounting holes can be used to mount other accessories. ...

Available