More From Contributor

The Ronin 2 Power Hub provides 3 industry standard power/data connectors, powering accessories at 14.4V. These rear facing ports not only provide power but are also able to transmit data. ...

Available

Upgraded high torque motors allow it to support a wider range of cameras, resist high winds & G-forces caused when mounted to a car & keep it moving smoothly in flight. ...

Available

Upgraded high torque motors allow it to support a wider range of cameras, resist high winds & G-forces caused when mounted to a car & keep it moving smoothly in flight. ...

Available

Use the Ready Rig Quick Connector to connect a Ready Rig & Ronin 2 Grip or other devices with a tube diameter of 25 mm or 30 mm. ...

Available

The RED Power Cable powers a RED camera by connecting the DC IN port on the camera to the 14.4V Accessory Power Port on Ronin 2's tilt axis. ...

Available

The RED Straight Power Cable powers a RED camera by connecting the LEMO port on the camera to the 14.4V Accessory Power Port on the Ronin 2. ...

Available

The Ronin 2 Remote Controller controls gimbal movement & switches between operating modes. ...

Available

The SDI IN Cable receives communication from a camera by connecting the SDI IN port on Ronin 2 to the SDI OUT port on the camera. ...

Available

The SDI OUT Cable sends communication by connecting the SDI OUT port on Ronin 2 to the SDI IN port on the monitor or video link. ...

Available

The Ronin 2 Thumb Controller is compatible with the Ronin 2 gimbal & provides an easy way to control the gimbal's pan, tilt, & roll axis movements. ...

Available