More From Contributor

£99.95
The veritas side rabate plane is used for cleaning up or trimming sidewalls of rabbets, dadoes or grooves to yield a perfect fit with its mate. it has a practical dual-blade configuration, coupled with an ingenious pivoting handle that permits right- or left-hand use to accommodate grain direction. The thin sole functions much like a skate, allowing use in slots as narrow as 3/16" & to a depth of 1/2". the toe is removable for use in stopped dadoes & has a fixing screw that is trapped to prevent loss. the depth stop helps orient & stabilize the plane during use & is both height adjustable & reversible (simply loosen the screw & rotate the stop without removing it from the body). Sculpted to fit the hand comfortably, the handle has a spring-loaded pivot for sure positioning – it won't move accidentally in use. the accurately machined, 4-1/2" long ductile cast iron plane body & the two o 1 tool steel blades (rc 58-60) are lapped. Pressure on the blade cap from a wave washer keeps the blades steady during set-up. weighs 1 lb. ...
Archived Product
£21.95
To prevent digs, this jig means that you can grind a slight radius. can be used on just about any grinder. Drill a 1/4" hole in the tool rest to hold the base pin. radius of the grind is set by the amount projecting. grind one side, you flip the skew & repeat. skew is clamped in position, which leaves both hands free. pin is steel; otherwise, the jig is brass & anodized aluminum. Skews are among the trickiest tools to use in turning without causing digs. to prevent digs, this jig means that you can grind a slight radius rather than a straight 20° skew. ...
Archived Product
£25.75
This is a cabinetmaker's square! it is used to lay out or transfer measurements quickly & accurately — you always have an ample reference face against your work without having to flop the square. This also simplifies working in two axes at once (e.g., measuring in 2" & over 1-1/2"), substantially reducing the chance of error when measuring & marking two

Dimensions simultaneously. The stainless-steel blade is 3" (77mm) wide & 6" (152mm) long, machine ground on all four edges. This imperial model is graduated to 4" along both edges & across one end to 3". The diamond cut-out in the blade holds a pencil tip in position & makes it easy to draw lines parallel to an edge. The locking mechanism has a notched pin like those on combination squares, with the blade bearing on polished, hardened steel reference pins set in the body. Accurate, & well made..

...
Archived Product
£31.70
A versatile tool for fine work, particularly on narrow material or in confined areas, this small router plane is invaluable for any task requiring small recesses, grooves or dadoes. The sole is designed to completely encircle the blade when in the closed-throat position for maximum registration to the workpiece, even when approaching from the side or working the edge. this also allows it to bridge recesses, providing great stability even on narrow stock. The blade may be positioned inboard for standard closed-throat use, or outboard, where the cutting edge of the blade extends beyond the body, for true bullnose work. the blade-clamping knob has been positioned behind the blade to allow visibility & chip clearance. pressure from a wave washer steadies the blade during height adjustments. The comfortable ductile cast iron body is accurately machined & features a lapped sole. The plane is 3-1/4" wide & 2-1/4" deep, with a 1/4" wide high-carbon steel blade. weighs 7 oz. ...
Archived Product
£21.40
The veritas square level attaches to a steel square (steel rule, i-beam, etc.) with integral rare-earth magnets. Has a vertical slot with an integral clamp to hold a ruler 1" to 1-1/8" wide & up to 1/16" thick. May be used to measure rise & run of just about anything. May be used to lay out sloping cuts on drywall or to fit molding next to a stair stringer. made from extruded & machined aluminum; fittings are brass. Bubble level is accurate; bubble movement of 1/16" represents angular change of half a degree. Weighs less than 3 oz. ...
Archived Product

Veritas Sliding Square Metric

This is a cabinetmaker's square! this is a cabinetmaker's square! it is used to lay out or transfer measurements quickly and accurately — you always have an ample reference face against your work without having to flop the square. This also simplifies working in two axes at once (e.g., measuring in 2" and over 1-1/2"), substantially reducing the chance of error when measuring and marking two dimensions simultaneously. The stainless-steel blade is 3" (77mm) wide and 6" (152mm) long, machine ground on all four edges. This metric model is graduated to 100mm along both edges and across one end to 70mm. The diamond cut-out in the blade holds a pencil tip in position and makes it easy to draw lines parallel to an edge. The locking mechanism has a notched pin like those on combination
squares, with the blade bearing on polished, hardened steel reference pins set in the body. Accurate, and well made..
RIP - This product is no longer available on our network. It was last seen on 29.10.2011

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: DIY Tools
  • SKU: 51640
Availability: In Stock
£26.45

Product Description

This is a cabinetmaker's square! this is a cabinetmaker's square! it is used to lay out or transfer measurements quickly & accurately — you always have an ample reference face against your work without having to flop the square. This also simplifies working in two axes at once (e.g., measuring in 2" & over 1-1/2"), substantially reducing the chance of error when measuring & marking two

Dimensions simultaneously. The stainless-steel blade is 3" (77mm) wide & 6" (152mm) long, machine ground on all four edges. This metric model is graduated to 100mm along both edges & across one end to 70mm. The diamond cut-out in the blade holds a pencil tip in position & makes it easy to draw lines parallel to an edge. The locking mechanism has a notched pin like those on combination squares, with the blade bearing on polished, hardened steel reference pins set in the body. Accurate, & well made..

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Steel - An alloy made predominately of Iron combined with <2% carbon
blade - A flat part of a device which usually has a cutting edge
polished - A process that makes and object or surface shiny. A refined and flawless finish.
edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
100mm - the equivilent of 10cm
edge - The point at which two surfaces meet
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Parallel - Two objects that run symmetrically alongside each other.
Accurate - A measurement of precision when all elements are correct.
Wide - Something with a large width.
Dimensions - The shapes and angles of something or a situation.
Reference - To prove evidence with a back up source.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.
Combination - The process of two of more things being mixed or combined together.

Supplier Information

DIY Tools
Established in 2000 and now on of the fastest growing home and garden etailers.

Providing a wide range of power tools, hand tools, garden equipment and diy tools

DIY Tools Delivery
Page Updated: 2013-03-09 03:03:17

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu