This kit contains everything you need to shape & sharpen all your turning tools. contains image 3: gouge & turning cutter jig (svd ...

Truing & dressing tool with built in screw feed. with this unique tool, tormek tt-50, you can true & dress your grindstone exactly round & flat. it mounts & locks instantly on the tormek universal support. the tool is guided by the universal support, which also guides the jigs. this ensures that the stone surface is always parallel to the tool fitted in the jig. 1. easy feeding across the stone. you can conveniently & without pressing with your thumbs feed the diamond cutter across the stone. you achieve an even feeding by alternately turning the two knobs with both your hands. the feed can be made in both directions. Thanks to the controlled feed, you get an even & flat stone surface with no ridges. there is no need to flatten afterwards with the stone grader sp?650. the slower you feed, the finer the surface you will achieve. a traverse time of 90 seconds across the stone gives you a good finish with hardly any visible grooves. 2. controlled cutting depth. the cutting depth is set exactly by the micro adjust on the universal support. new universal supports will have a scale with increments for each 0, 25 mm or 0, 01". you can also use your existing micro adjust, which has no scale. a cutting depth of 0, 25 mm or 0, 01" corresponds to a sixth of a full turn. 3. increased steel removal. with a higher feed speed across the stone (approximately 30 seconds instead of 90 seconds) the surface will have pronounced grooves, which will cause the stone to grind faster. this is beneficial, when sharpening or shaping tools in hard steel with a large bevel area, e.g. turning skew chisels & electric planer/jointer blades. ...

Gives your fingernail gouges & skews the perfect shape, the sharpest edge & the longest life!. Exact replication on woodturning fingernail gouges & oval skews. Fingernail gouges & skews with a curved edge are difficult to sharpen with precision due to the complicated geometries. both the shape & edge angle must be repeated exactly. This latest development from tormek, the turning tool setter tts-100 solves this problem & makes the sharpening an easy task. it enables you to exactly replicate the edge on bowl or spindle gouges as well as flat or oval skews with either a straight or a curved edge. Thanks to the exact settings at each sharpening – you can just touch up the edge & the work is done in seconds. you do not shape but sharpen the tool. The setter works with the tormek jigs svd-185 for gouges & the svs-50 for skews. the built in settings give you pre-determined edge geometries, which are recommended by experienced turners around the world. you do not need to worry about whether you have the right shape. Another benefit of the design is that it works irrespectively of the stone diameter. you always get exactly the same edge angle – even when you switch from a worn stone to a new larger one. the turning tool setter works as well when setting the edge angle on the leather honing wheel. ...