Tormek t-7 water cooled sharpening system:
200w motor
heavy duty steel construction
water-cooled sharpening wheel leather


...

The tormek t-7 sharpening system raises the standards of such sharpening systems further & offers a premium sharpening solution. The t-7 also offers a 200w motor, heavy duty steel construction, water-cooled sharpening wheel & leather honing wheel but the kit of accessories has been extended to contain the new tt-50 truing & dressing tool, the sp-650 stone grader & the new se-76 square edge jig which has an increased capacity of 76mm (3") & has safety stops to prevent chisels running off the side of the stone. the comprehensive range of specialist grinding jigs makes this the first choice for amateurs & professionals alike. tools can be sharpened either with the supergrind wheel cutting towards the edge, or by using the xb 100 support base, grinding away from the edge (preferable in some cases, especially with carving tools). The main tool support bar is fitted with a micro-adjuster which makes setting up or replicating a sharpening angle both easy & highly accurate. the t 7 package
Includes:; tt-50 truing & dressing tool, sp-650 stone grader, se-76. tormek htk-705 hand tool kit:

this kit of jigs is perfect for those using most of the main hand tools. kit is packed in a quality storage box for bench or wall mounting & contains the following tormek machine accessories: svm-45 short knife jig
svm-140 long thin knife jig
svx-150 scissor jig
svs-32 short tool jig
sva-170 axe grinding kit
. tormek tnt-708 woodturner's accessory kit:
a comprehensive kit of jigs for those using wood turning tools
- this kit offers tormek accessories at great value for your money.

kit contains the following tormek machine accessories:
svd-185 universal gouge jig
svs-50 multi jig
svd-110 torlock toolrest
tts-100 turning tool setter
la-120 honing wheel
mh-380 protective cover
tnt-300 dvd & tuition manual

model: t-7
nett weight: 14.2kg
overall l x w x h: 270 x 250 x 325mm
power: 200w
wheel diameter: 250mm
wheel

Width: 50mm
.




























...

Truing & dressing tool with built in screw feed. with this unique tool, tormek tt-50, you can true & dress your grindstone exactly round & flat. it mounts & locks instantly on the tormek universal support. the tool is guided by the universal support, which also guides the jigs. this ensures that the stone surface is always parallel to the tool fitted in the jig. 1. easy feeding across the stone. you can conveniently & without pressing with your thumbs feed the diamond cutter across the stone. you achieve an even feeding by alternately turning the two knobs with both your hands. the feed can be made in both directions. Thanks to the controlled feed, you get an even & flat stone surface with no ridges. there is no need to flatten afterwards with the stone grader sp?650. the slower you feed, the finer the surface you will achieve. a traverse time of 90 seconds across the stone gives you a good finish with hardly any visible grooves. 2. controlled cutting depth. the cutting depth is set exactly by the micro adjust on the universal support. new universal supports will have a scale with increments for each 0, 25 mm or 0, 01". you can also use your existing micro adjust, which has no scale. a cutting depth of 0, 25 mm or 0, 01" corresponds to a sixth of a full turn. 3. increased steel removal. with a higher feed speed across the stone (approximately 30 seconds instead of 90 seconds) the surface will have pronounced grooves, which will cause the stone to grind faster. this is beneficial, when sharpening or shaping tools in hard steel with a large bevel area, e.g. turning skew chisels & electric planer/jointer blades. ...

Gives your fingernail gouges & skews the perfect shape, the sharpest edge & the longest life!. Exact replication on woodturning fingernail gouges & oval skews. Fingernail gouges & skews with a curved edge are difficult to sharpen with precision due to the complicated geometries. both the shape & edge angle must be repeated exactly. This latest development from tormek, the turning tool setter tts-100 solves this problem & makes the sharpening an easy task. it enables you to exactly replicate the edge on bowl or spindle gouges as well as flat or oval skews with either a straight or a curved edge. Thanks to the exact settings at each sharpening – you can just touch up the edge & the work is done in seconds. you do not shape but sharpen the tool. The setter works with the tormek jigs svd-185 for gouges & the svs-50 for skews. the built in settings give you pre-determined edge geometries, which are recommended by experienced turners around the world. you do not need to worry about whether you have the right shape. Another benefit of the design is that it works irrespectively of the stone diameter. you always get exactly the same edge angle – even when you switch from a worn stone to a new larger one. the turning tool setter works as well when setting the edge angle on the leather honing wheel. ...

Sets & measures the edge angle. Adjustable to any stone diameter from ø 250 mm or 10" down to ø 150 mm or 6". measures from 10° to 75°. Magnets keeps it in place. This patented anglemaster has two functions: you can use it to set the jig to the grindstone so that it grinds your tool to any desired edge angle from 10° to 75° & you can use it to measure an existing edge angle on a tool. It is designed to work on any grindstone diameter from 250 mm (10") down to 150 mm (6"). you achieve an exact setting irrespective of the degree of stone wear. The anglemaster has two magnets for convenient fixing onto the housing of the machine. ...