More From Contributor

Apeks WTX6R Buoyancy Cell The first of it's kind. This clever, redundant buoyancy cell has both airways coming off the back top of the cell. This is the ideal location for a diver in the swimming position. This redundant system contains two inner cells in one outer bag. Either cell is capable of generating 60 lbs of lift when it is full. Dive with peace of mind knowing that you're carrying a redundant system. The WTX6R can mate directly to the WTX harness or the stainless steel back plate using twin tank bands or using center bolts. Highly efficient drains allow water to empty quickly after a dive. Outer bag constructed out of Armorshield™ Cordura® to resist abraision & fading. Inner bags constructed from mil-spec welded fabric. A safety cable inside the elliptical hoses prevents hyperextension of the corrugated hoses. Features the Apeks technical inflator with brass buttons. The air cell closest to the diver has a pull dump on inside lower left with a capped-off port on the inside lower right for an optional right dump. The air cell furthest from the diver has a pull dump on outside lower right with a capped-off port on the outside lower left for an optional left dump. 2.58kg dry weight. ...

Archived Product

Apeks WTX8 Buoyancy Cell Outer bag constructed out of Armorshield™ Cordura to resist abrasion & fading. Inner bag constructed from mil-spec welded fabric. This is the same fabric used in survival vests worn by US fighter pilots. Inner bladder protected from zipper with V-diamond rubber. Pull dump on inside lower left Optional pull dump may be added to inside lower right Highly efficient drains empty water quickly after the dive. 3 upper grommets allow various height settings coupled with a lower slot that compensates for misaligned band bolts. The airway comes off the top back center of the cell A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose. Features the Apeks technical inflator with brass buttons 1.66kg dry weight ...

Archived Product

Apeks XTX100 Regulator One of our top-of-the-range quality regulators, the XTX100, is the definitive blend of style, quality & high performance. It is nearly identical to the XTX200 apart from cosmetic apperance. With enhanced ergonomics, a reduction in breathing resistance, & a re- designed heat exchanger, offering enhanced performance, the XTX100 is the flagship regulator in the Apeks range. It also has a new reinforced plastic cover on the front so is a lot more durable. This regulator can be used with the hose on either the right or the left & can be easily changed over, can be used for cold water diving & a nitrox version is also available. Specifications First Stage * Solid one piece body * 4 angled medium pressure ports, 4 x 3/8" UNF * 2 angled high pressure ports, 2 x 7/16" UNF * Environmentally dry sealed system * luxurious satin silver chrome finish * Balanced for superior performance Second Stage * Adjustable cracking control * Integrated venturi control * Pneumatically balanced valve design * Micro Adjuster * Suitable for cold water use * Bright & Satin Chrome Finish * Right or Left hand hose configuration * Metal Inserted front cover * New Optional Extra Hose Swivel connection * Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied) * Identical to the XTX200 except for chrome finish & model number * Nitrox versions available ...

Archived Product

Apeks XTX200 & XTX40 Octo Apeks XTX200 scuba diving regulator can deal with anything you throw at it, & the XTX40 Octopus will not let you down. FREE REGULATOR BAGThe Apek XTX Regulator range is Nitrox Compatable up to 40% All Packages Come With Hoses. One of our top-of-the-range quality regulators, the XTX200, is the definitive blend of style, quality & high performance. With enhanced ergonomics, a reduction in breathing resistance, & a re- designed heat exchanger, offering enhanced performance, the XTX200 is the flagship regulator in the Apeks range. It also has a new reinforced plastic cover on the front so is a lot more durable. This regulator can be used with the hose on either the right or the left & can be easily changed over, can be used for cold water diving & a nitrox version is also available. The XTX40 octopus can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick & simple & can be performed by any APEKS Authorised Service Technician. The XTX40 octopus incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) & the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator). The XTX40 octopus incorporates a new two-shot high strength plastic front cover, improving the durability of the most vulnerable part of the demand valve. The new ergonomic Venturi lever of the XTX40 has been designed to reduce the amount of grit ingress. A new silicone exhaust valve has been used on the XTX40 regulator improving breathing performance ...

Archived Product

Apeks XTX200 & XTX50 Octo Our top of the range Apeks package
- the Apeks XTX200 scuba diving regulator can deal with anything
...

Archived Product

Apeks XTX40 DS4 Regulator The XTX 40 DS4 is composed of the XTX 40 second stage & DS4 first stage. The DS4 first stage regulator uses a dry sealed system & an over balanced diaphragm design where the intermediate pressure supplied to the second stage increases as the diver descends to greater depths which results in superior breathing performance regardless of depth. The second stage, XTX40 regulator is unique thanks to to its Reversible Venturi System which allows the standard right handed hose configuration to be changed to the left side (by an authorised Apeks service technician). Also the XTX40 features the Diver Changeable Exhaust system which gives the diver the ability to switch from a small exhaust tee which is suitable for use with an octopus regulator to a wider exhaust tee which provides minimal bubble interference essential for underwater photography. The ergonomic Venturi lever has been designed to reduce grit ingress & a new silicone exhaust valve has been added to improve breathing performance. Features Second stage: Integrated venturi control Pneumatically balanced valve design Suitable for cold water use Bright Chrome Finish Right or Left hand hose configuration Two shot plastic front cover Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (only one set supplied) 1st stage: Dry sealed system for cold water. No turret. 4 medium pressure ports 3/8 UNF 1 high pressure port 7/16 UNF ...

Archived Product

APEKS XTX40 Octopus The XTX40 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick & simple & can be performed by any APEKS Authorised Service Technician. The XTX40 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) & the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator). The XTX40 regulator incorporates a new two-shot high strength plastic front cover, improving the durability of the most vulnerable part of the demand valve. The new ergonomic Venturi lever of the XTX40 has been designed to reduce the amount of grit ingress. A new silicone exhaust valve has been used on the XTX40 regulator improving breathing performance. ...

Archived Product

Apeks XTX40 Regulator with DST First Stage The XTX40 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick & simple & can be performed by any APEKS Authorised Service Technician. The XTX40 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) & the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator). The XTX40 regulator incorporates a new two-shot high strength plastic front cover, improving the durability of the most vulnerable part of the demand valve. The new ergonomic Venturi lever of the XTX40 has been designed to reduce the amount of grit ingress. A new silicone exhaust valve has been used on the XTX40 regulator improving breathing performance. Specification First Stage Swivel turret body 4 medium pressure ports, 4 x 3/8" UNF 2 high pressure ports, 2 x 7/16" UNF Environmentally dry sealed system Polished chrome finish Balanced for superior performance Second Stage Integrated venturi control Pneumatically balanced valve design Suitable for cold water use Bright Chrome Finish Right or Left hand hose configuration Two shot plastic front cover Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (only one set supplied) Nitrox & Octopus versions available ...

Archived Product

Apeks XTX40 & XTX40 Octo This is a great package for a first scuba diving regulator set
- it will deal with allof your recreational
...

Archived Product

This is a great scuba diving regulator package for those planning on travelling
- it is lightweight & small in size. The Apek XTX
...

Archived Product

Apeks Xtx200 Regulator

Apexs XTX 200 Regulator The XTX200 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick & simple & can be performed by any APEKS Authorised Service Technician. The XTX200 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) & the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus
regulator). The XTX200 regulator incorporates a new front cover manufactured using high strength plastic which greatly improves the durability of the most vulnerable part of the demand valve & an aesthetically pleasing chrome plated metal insert immediately identifying this regulator as a top of the range model. The new purge button has improved the purge itself. Due to the new open design the purge is self clearing & prevents debris build-up. The new ergonomic Venturi lever of the XTX200 has been designed to reduce the amount of grit ingress & also incorporate an index-able, tactile / audible ratchet Venturi lever mechanism. A new silicone exhaust valve has been used on the XTX200 regulator improving breathing performance. Specification First Stage Compact one piece body 4
angled medium pressure ports, 4 x 3/8" UNF 2 angled high pressure ports, 2 x 7/16" UNF Environmentally dry sealed system Attractive black & luxurious satin silver chrome finish Balanced for superior performance Removable ARCAP valve seat Second Stage Adjustable cracking control Integrated venturi control Pneumatically balanced valve design Micro Adjuster Suitable for cold water use Bright Chrome Finish Right or Left hand hose configuration Metal Inserted front cover Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied) Identical to the XTX100 except for model number decal Nitrox versions available

Availability: Out Of Stock
Supplier: Deep Blue Dive
SKU: config427658

Description Reviews / Comments Add New

Product Description

Apexs XTX 200 Regulator The XTX200 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick & simple & can be performed by any APEKS Authorised Service Technician. The XTX200 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) & the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator). The XTX200 regulator incorporates a new front cover manufactured using high strength plastic which greatly improves the durability of the most vulnerable part of the demand valve & an aesthetically pleasing chrome plated metal insert immediately identifying this regulator as a top of the range model. The new purge button has enhanced the purge itself. Due to the new open design the purge is self clearing & prevents debris build-up. The new ergonomic Venturi lever of the XTX200 has been designed to reduce the amount of grit ingress & also incorporate an index-able, tactile / audible ratchet Venturi lever mechanism. A new silicone exhaust valve has been used on the XTX200 regulator improving breathing performance. Specification First Stage Compact one piece body 4 angled medium pressure ports, 4 x 3/8" UNF 2 angled high pressure ports, 2 x 7/16" UNF Environmentally dry sealed system Attractive black & luxurious satin silver chrome finish Balanced for superior performance Removable ARCAP valve seat Second Stage Adjustable cracking control Integrated venturi control Pneumatically balanced valve design Micro Adjuster Suitable for cold water use Bright Chrome Finish Right or Left hand hose configuration Metal Inserted front cover Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied) Identical to the XTX100 except for model number decal Nitrox versions available

Reviews/Comments

Add New

Jargon Buster

Silver - A colour based on the colour of the metal

Silver - A chemical element, metalic. Has the highest elctrical conductance of any element. Also known for its exceptional anitmicrobal properties

Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.

Ergonomic - A specific design to fit the purpose of the user

Plastic - A generic term for a synthetic product used in the manufacture of products

Satin - A weaving technique which provides a glossy surface and dull back

Chrome - A shiney metalic finish where chromium is electroplated onto an object

Dry - A term used to describe an item with has little or no water present

Dry - A term used in wine making to describe the lack of sugar (sweetness)

Hand - A part of the body at the end of the arm

Hand - A pointer which indicates time on a clock face

Button - A round or square object used for fastening clothing or other items

hose - A hollow tube for carrying liquid from one location to another.

water - A chemical substance. Chemical formula H2O.

button - A small fastener used on clothing to secure two pieces of fabric together.

compact - Carefuly designed to ensure an item has a minimal physical size

Silicone - An inert synthetic rubber like compound

Chrome - A shiney bright metalic coating of chromium applied to metals

Quick - Something that is fast

Large - something that takes up more space than normal.

Small - something that takes up less space than normal.

Compact - something that has a lot combined within a small space.

Specification - A description of a product with the details of its attributes.

Adjustable - Something that can be changed or slightly modified to fit.

Technician - An professional in looking after equipment, for example in a laboratory.

Simple - Basic, easy no difficulty in understanding.

Valve - An opening and closing to control the movement of fluid through pipes.

Aesthetically - Something that is carried out tastefully.

Design - A drawing or styles that shows the look and functionality of something before its made.

Adjustable - Something that can be changed in order to fit better.

Feature - An attribute that makes something stand out.

Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.

Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.

Ideal - Something that satisfies a perfect criteria.

More From Contributor

Apeks Xtx200 Regulator

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account