Apeks Sure Lock™ Attachments This unique accessory means that you can mount the Sure Lock™ Weight System directly to the back plate.

Includes:: necessary attachment hardware plus spares. May be used without the Sure Lock™ Weight System to spread the weight of the cylinders over the hips 3 different grommets settings allow for proper positioning of the Sure Lock™ weight pockets.

...

Apeks WTX Harness This is our most versatile harness. Solid construction coupled with durable materials make this harness a cornerstone for many applications   Can mount directly to a single cylinder using dual nylon cylinder bands. Can accept an Apeks back plate for heavy loads such as twin steel cylinders. Multiple grommet settings on the waistband allow the attachment of the Sure Lock™ weight system. Open shoulder design allows diver to add or remove hardware for total customization. Made from rugged 1000D Armorshield Cordura. Removable crotch strap made from 2” webbing. 6-two inch stainless steel D-rings (2, angled, on shoulders, 2 on the hips & 2 on the crotch strap) 6-one inch stainless steel D-rings along the sides accommodate light canisters, argon bottles or other accessories. 2-one inch stainless steel D-rings along the lower back are for marker buoys, reels or other accessories Removable back pad Heavy duty waist buckle Stainless steel triloaders distribute the load between the back, waist & shoulders SOLAS reflector airway hold-downs can be removed or repositioned. Chest strap comes standard.   BC SIZE GUIDE measured in inches.  WTX Harness Only size Medium waist range 29-60" size Large waist range 32-60" size Extra Large waist range 34-60" Measured in inches from the centre of the waistband front to centre of the tank band back at the smallest setting
- size Medium over the shoulder 36", size Large over the shoulder 40", size Extra Large over the shoulder 42"
- all additional adjustments 9". WTX Harness with surelock attachments size Medium waist range 33-60" size Large waist range 36-60" size Extra Large waist range 38-60"

...

Apeks WTX3 Buoyancy Cell This single cylinder buoyancy cell can mate to the WTX Harness or directly to the back plate. Gussets along each side allow for a full 32 lbs of lift without compromising the overall size of the WTX3. 4 slots allow it to be mounted to a WTX harness or back plate using & upper & lower nylon cylinder bands. 2 pairs of grommets allow the WTX3 to be bolted on if a single cylinder mounting kit is used. A 2” wide restriction band at the bottom of the WTX3 allows the cylinder to nestle into the inflated buoyancy cell so it doesn’t get pushed away from your body. A 2” D-ring on the restrictor band is a convenient place to add accessories like a surface marker buoy. The airway comes off the top back center of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose. Features the Apeks technical inflator with brass buttons

Includes:: front, lower left pull dump Constructed from durable 840-denier nylon. 1.26kg dry weight

...

Apeks WTX4 Buoyancy Cell This is a new buoyancy cell in the WTX Series of floatation products. The WTX4 is a smaller version of the WTX6 & WTX8 but it can accept single cylinders too! The WTX4 can mate directly to the WTX harness or the stainless steel back plate using twin tank bands or using center bolts Highly efficient drains allow water to empty quickly after a dive Outer bag constructed out of Armorshield™ Cordura ...

Apeks WTX6 Buoyancy Cells This twin cylinder buoyancy cell provides 60 lbs of lift.   Outer bag constructed out of Armorshield™ Cordura to resist abrasion & fading. Inner bag constructed from mil-spec welded fabric. This is the same fabric used in survival vests worn by US fighter pilots. Inner bladder protected from zipper with V-diamond rubber. Pull dump on inside lower left Optional pull dump may be added to inside lower right Highly efficient drains empty water quickly after the dive. 3 upper grommets allow various height settings coupled with a lower slot that compensates for misaligned band bolts. The airway comes off the top back center of the cell A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose. Features the Apeks technical inflator with brass buttons 1.66kg dry weight ...

Apeks WTX8 Buoyancy Cell   Outer bag constructed out of Armorshield™ Cordura to resist abrasion & fading. Inner bag constructed from mil-spec welded fabric. This is the same fabric used in survival vests worn by US fighter pilots. Inner bladder protected from zipper with V-diamond rubber. Pull dump on inside lower left Optional pull dump may be added to inside lower right Highly efficient drains empty water quickly after the dive. 3 upper grommets allow various height settings coupled with a lower slot that compensates for misaligned band bolts. The airway comes off the top back center of the cell A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose. Features the Apeks technical inflator with brass buttons 1.66kg dry weight   ...

Apeks XTX100 Regulator One of our top-of-the-range quality regulators, the XTX100, is the definitive blend of style, quality & high performance. It is nearly identical to the XTX200 apart from cosmetic apperance. With enhanced ergonomics, a reduction in breathing resistance, & a re- designed heat exchanger, offering enhanced performance, the XTX100 is the flagship regulator in the Apeks range. It also has a new reinforced plastic cover on the front so is a lot more durable. This regulator can be used with the hose on either the right or the left & can be easily changed over, can be used for cold water diving & a nitrox version is also available. Specifications First Stage * Solid one piece body * 4 angled medium pressure ports, 4 x 3/8" UNF * 2 angled high pressure ports, 2 x 7/16" UNF * Environmentally dry sealed system * luxurious satin silver chrome finish * Balanced for superior performance Second Stage * Adjustable cracking control * Integrated venturi control * Pneumatically balanced valve design * Micro Adjuster * Suitable for cold water use * Bright & Satin Chrome Finish * Right or Left hand hose configuration * Metal Inserted front cover * New Optional Extra Hose Swivel connection * Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied) * Identical to the XTX200 except for chrome finish & model number * Nitrox versions available ...

Apeks XTX200 & XTX40 Octo Apeks XTX200 scuba diving regulator can deal with anything you throw at it, & the XTX40 Octopus will not let you down. FREE REGULATOR BAGThe Apek XTX Regulator range is Nitrox Compatable up to 40% All Packages Come With Hoses. One of our top-of-the-range quality regulators, the XTX200, is the definitive blend of style, quality & high performance. With enhanced ergonomics, a reduction in breathing resistance, & a re- designed heat exchanger, offering enhanced performance, the XTX200 is the flagship regulator in the Apeks range. It also has a new reinforced plastic cover on the front so is a lot more durable. This regulator can be used with the hose on either the right or the left & can be easily changed over, can be used for cold water diving & a nitrox version is also available. The XTX40 octopus can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick & simple & can be performed by any APEKS Authorised Service Technician. The XTX40 octopus incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) & the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator). The XTX40 octopus incorporates a new two-shot high strength plastic front cover, improving the durability of the most vulnerable part of the demand valve. The new ergonomic Venturi lever of the XTX40 has been designed to reduce the amount of grit ingress. A new silicone exhaust valve has been used on the XTX40 regulator improving breathing performance ...

Apeks XTX200 & XTX50 Octo  Our top of the range Apeks package
- the Apeks XTX200 scuba diving regulator can deal with anything
...

Apexs XTX 200 Regulator The XTX200 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one. This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick & simple & can be performed by any APEKS Authorised Service Technician. The XTX200 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference (essential for underwater photography) & the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator). The XTX200 regulator incorporates a new front cover manufactured using high strength plastic which greatly improves the durability of the most vulnerable part of the demand valve & an aesthetically pleasing chrome plated metal insert immediately identifying this regulator as a top of the range model. The new purge button has enhanced the purge itself. Due to the new open design the purge is self clearing & prevents debris build-up. The new ergonomic Venturi lever of the XTX200 has been designed to reduce the amount of grit ingress & also incorporate an index-able, tactile / audible ratchet Venturi lever mechanism. A new silicone exhaust valve has been used on the XTX200 regulator improving breathing performance. Specification First Stage Compact one piece body 4 angled medium pressure ports, 4 x 3/8" UNF 2 angled high pressure ports, 2 x 7/16" UNF Environmentally dry sealed system Attractive black & luxurious satin silver chrome finish Balanced for superior performance Removable ARCAP valve seat Second Stage Adjustable cracking control Integrated venturi control Pneumatically balanced valve design Micro Adjuster Suitable for cold water use Bright Chrome Finish Right or Left hand hose configuration Metal Inserted front cover Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (Both sets supplied) Identical to the XTX100 except for model number decal Nitrox versions available ...