A high-performance, reliable laboratory power supply can be built with the power supply circuit. Because of the wide-ranging adjustability of voltage & current this circuit can also be used in a demanding laboratory environment. The adjustments to current & voltage as well as fine adjustment to voltage are made with three trim-pots. These can be replaced during installation with external potentiometers (10 k& Omega lin, 2 x 470 & Omega lin). ...

A high-performance, reliable laboratory power supply can be built with the power supply circuit. Because of the wide-ranging adjustability of voltage & current this circuit can also be used in a demanding laboratory environment. The adjustments to current & voltage as well as fine adjustment to voltage are made with three trim-pots. These can be replaced during installation with external potentiometers (10 k& Omega lin, 2 x 470 & Omega lin). ...

5-15V universal power supply for power supply of many small electrical devices, voltage-stabilised, short-circuit proof. The delivery package

Includes:: different output plugs, which can be connected to the output line in the desired polarity. The power supply can be used worldwide thanks to the electronic switched power supply (100-240V AC). By means of a rotary switch the following output voltages can be set: 5V / 6V / 7.5V / 9V / 12V / 13.5V / 15V DC. Maximum output current: 2250m A at 5-12V, 1800m A at 13.5V-15V.

...

This module can be used in conjunction with the ICD2 (part no. 16 51 81) to program 300 to 600-mil PDIP-Flash PICs. It has a 40 pin ZIF socket & a MPLAB ICD2 connector to connect the ICD2 & an indicator display & jumpers to configure the programming. The Universal Programming Module can also be used in combination with the PICSTART-PLUS part no. 16 99 60. This allows the programming of PIC processors which previously could not be programmed using the PICSTART-PLUS due to an unsuitable pin configuration. ...

The Universal Drive is used for realistic driving for points, form signals & crossing gates & construction vehicles & similar objects in motion. This depending on the discontinued operations mode, a simple movement between two end positions for the switch machine or a very realistic simulation of the inertia due to a number of times, ringing diminution in the end positions. A control electronics, a running or, alternatively, two commercially available servos, each on a base plate, the steering wheel is mounted at an angle lever. Through this lever can set up an over or under settlement can be set-up & also extra mechanical stops designed to protect the often delicate models can be arranged. To acknowledge the extreme positions two mechanical micro switches can be affixed. The control electronics has 3 Key inputs which the functions ON
- OFF
- & TOGGLE mode (alternating on / off) have the same key. On the output side in parallel, one or two rowing machines can be infected the end positions & the rotation speed can be set for over 3 potentiomete.
In addition, pads are equipped with extra switching outputs for 2 pairs of alternately flashing LED (railway crossing) & two status LEDs on the output indicator are available Also two relays can be used for necessary feedback tasks or be connected to automatic train control. The resistors for the LED & the switch settings with suppressor for the relay coils are already integrated into the control electronics. Current consumption depends on the used rowing machine.


...