This smoke detector uses the photoelectric principle & warns you of life-threatening smoke. Powered by a 9 V battery, making this smoke detector also ideal for mobile use in a caravan or mobile home. For optimum protection each room should have its own detector. ...

The 230 V operated smoke detector including 9 V backup battery with Vd S certification quickly detect smoke coming from fires & gives out an alarm. Apart from the single operation, up to 38 smoke detector of the same time can be linked by cable. The functions can be tested without much effort by simply pressing the test button. ...

The battery operated smoke detector with Vd S certification quickly detects the smoke resulting from fires & sends out an alarm. Indication of battery change for 30 days The functions can be tested without much effort by simply pressing the test button. The lithium battery included in the delivery has a durability of up to 10 years. ...

The photoelectric ABUS smoke detector reacts to smoke particles. If too much smoke enters its measuring chamber, a loud alarm signal is triggered. The smoke detector is mounted at the ceiling in the middle of the room. The minimum distance to the side wall is 15 cm, the distance to every corner is at least 50 cm. The capturing range of the smoke detector is up to 40 m high. We recommend installing each one smoke detector in the hall, the stairways, living room & bedroom. The integrated, powerful piezo-alarm sounder provides for an effective alarming in case of a fire
- with a volume of at least 85 d B. With the right batteries (9 V lithium) the lifespan is up to 10 years. The battery lifetime varies depending on how often you run the detectors function test. This can be done easily & conveniently via the function test button (recommended: one test every week). A low battery is notified by the detector, issuing regular beep tones. The The home smoke-detector is Vd S-certified. This guarantees a high security.
...

The DELTA reflex battery (Article no. 752 079) of the smoke detector can be in addition equipped with a relay module. The relay module allows switching on of alarm devices like Horns, sirens, warning lights, etc., or a connection to the building automation system GAMMA instabus. Even the standby current (alarm loop with normally closed contact) can be monitored due to the potential free changeover contact (NC & NO). The contacts of the relays are implemented via a 3-way plug terminal. The power (3 to 5 V) is supplied to the relay module via the port of the smoke detector. ...

You don't want to make a compromise where your safety is concerned. You can trust the Vd S approved (Vd S: German insurance industry association) domestic smoke detectors from Abus. These new wireless smoke detectors can communicate with each other without external radio modules or a central unit. The case is only 100 x 36 mm & contains the optical measuring chamber, electronics, 85 d BA siren, battery & the wireless transmitter & receiver. To ensure that the system is not affected by other wireless smoke detectors in the vicinity, the detectors communicate using a (selectable) coding system. If any of the detectors detects a fire, a loud alarm will sound. All the other smoke detectors with the same coding are also triggered. The range is up to 100 m in the open field. The detector which first detected the fire is easily identified as it uses a different alarm signal & flashing frequency. You can choose from 16 wireless codes. As an additional safety function, this wireless smoke detector calibrates itself every day. This avoids false alarms caused by dust, vapour, etc. ...

This small & unnoticeable smoke detector operates according to the scattered light principle. Even a small quantity of smoke particles is enough to trigger a loud warning tone (85 d B/3 m) & an optical alarm display (via LED). Furthermore, is conveyed by the radio module of the alarm to all the wireless smoke detector with the same encoding in transmitter. A comprehensive alarm is thus implemented in a simple manner. A very useful test function provides a straightforward & easy verification of the entire device (including the smoke chamber) ...

This smoke detector can be randomly expanded with separately available wireless module FRM-320 (75 17 68). A simultaneous alarm trigger at all connected smoke detectors is also possible with a tandem switch via cable. The functioning of smoke detectors should be checked at least every 4 weeks. In conventional smoke detectors, the test button is usually attained only with tools (ladder, chair etc.). This hazardous situation is avoided when using an EASY TEST smoke detector. The big EASY TEST testing switch can be easily & safely activated, for example: using a broomstick. ...