Strong, long-lasting, & with vibrant colours
- these Resin 8 Opaque Resin Pigments will add intense flat colours to your resin
...

Use these Resin 8 Essential Pigments for adding stunning colour to your Eco Resin JESMONITE.  Covering all bases, this bundle ...

THIS PRODUCT IS EXCLUSIVE TO CASS ART Polychromatic, shimmering & lustrous
- this gorgeous collection of Resin 8 Metallic Pigments
...

THIS PRODUCT IS EXCLUSIVE TO CASS ART Curated especially for Cass Art, the Resin 8 Mica Powder Discovery Bundle is comprised of 6 stunning & versatile shades
- Arctic White, Sea Smoke, Dreamy Aquamarine, Pure Gold, Emerald Lagoon & violet Passion. Made from natural minerals, Resin 8 mica powder has a small micron size (giving great cover & dispersion, & the all-important shimmer) & you only need a small amount to create lustrous effects. Hugely versatile, you can use this mica powder in resin, art, nail polish, card-making, body butter/wax, oil, face products, calligraphy, car paint &, of course, cosmetics such as eyeshadow, lip products & blusher. Decorate the surface of candles, polymer clay & even soap with it. Mix micas together to create new shades & use in card-making & scrap-booking. Ink stamps before stamping onto cardstock, add to polymer clay before its fired, sprinkle a little in your body butter for a golden glow, add to a homemade binder & make wall paint for your kitchen! Resin 8 mica powders are cosmetic grade natural mineral pigments that have a fantastic shimmer & metallic-like appearance. Completely non-toxic, vegan-friendly & cruelty-free, our mica powder has millions of light-reflecting particles which create beautiful shiny effects in all sorts of arts, crafts & cosmetics. From the delicate pastels to bold & vibrant shades, Resin 8 mineral powder pigments are all ethically-sourced. How To Use Intermix: you can create any colour under the sun with the mica powders
- experiment by mixing two or more colours in a small pot prior to use. Quantity in resin: you can pretty much use as much as you like as mica powder is inert, so doesnt affect the chemicals that cause resin & hardener to cure. However, we suggest around a pinenut sized amount for 20mls of resin, a cashew nut for 120mls & an almond for 200mls of resin. Use 10% as the general rule of thumb. Dust into moulds: use a soft-bristled craft brush to dust mica powder inside silicone moulds before making resin castings or candles. This will give you a more controlled shimmer effect.

...

Nitrile gloves are latex-free, non-powdered, disposable synthetic rubber gloves that protect your hands when working with resin. They are soft & comfortable to wear & have a high resistance to chemical/oil permeation. This pack contains 5 pairs of large or medium sized Resin 8 Nitrile Gloves. Ideal to use with resin & other painting mediums such as oil & acrylic.  ...

Coat-it is the ultimate all-purpose resin for art, craft & jewellery. Not only does it provide you with an exceptionally durable, glossy finish, its also crystal-clear, cruelty-free, non-toxic, uv stable & vegan-friendly. Use coat-it resin for almost everything your creative mind can dream of
- creating artwork & seascapes, use as a glossy proffesional finish for paintings, cast unique jewellery in shallow silicone moulds. Coat-it is the resin youve been looking for, & now youve found it. Its pretty straightforward
- mix equal parts together, leave them to set & voila, youre a resin pro. This exceptional craft resin is officially certified safe to use at home & has a super easy 1:1 mix ratio with the very latest anti-yellowing tech inside. VOC, solvent & BPA free, with little to no odour & touch dry in 4-5 hours. Coat-it resin holds patterns beautifully, due to it being so thick, & has excellent bubble release when part A is warmed. Coat-it can be used as a food-safe coating & as it is super-shiny it will guarantee you the very best, premium finish every time. When you thought it just couldnt get any better, weve knocked it out of the park with this fact... Coat-it is made from materials that would otherwise enter landfill (as its a by-product of the oil industry). So, buying coat-it epoxy resin from Resin 8 means you can create beautiful pieces whilst preventing waste.   Resin 8 coat-it epoxy resin is a modern formulation of the safest epoxy chemicals available. However, all epoxy resins are chemicals & they do come with Health & Safety implications & instructions, for which it is your responsibility to follow: Top Tips You must wear nitrile gloves (or use a specialist resin barrier cream on your hands & unprotected skin). You must wear a respirator when sanding partially-cured resin. You do not need to wear one when pouring this resin. Work with this resin in a well ventilated room (open the window, door, etc). We advise you to wear safety goggles. Avoid skin contact. We advise against eating, drinking or smoking while working. In case of eye contamination wash with plenty of water for 15 minutes & consult medical advice immediately. Resin 8 coat-it epoxy resin has been certified by the ASTM (American Society for Testing & Materials) as non-toxic when used as directed & conforms to ASTM D-4236. It contains no VOCs, no solvents & doesnt give off fumes when used at room temperature. It is non-flammable & has a very mild odour & therefore safe for home use. It is certified as safe for incidental food contact. As with any epoxy resin, it is not suitable for use on anything that comes into direct contact with the mouth (e.g. a cup) or as a cutting surface.

...

Coat-it is the ultimate all-purpose resin for art, craft & jewellery. Not only does it provide you with an exceptionally durable, glossy finish, its also crystal-clear, cruelty-free, non-toxic, uv stable & vegan-friendly. Use coat-it resin for almost everything your creative mind can dream of
- creating artwork & seascapes, use as a glossy proffesional finish for paintings, cast unique jewellery in shallow silicone moulds. Coat-it is the resin youve been looking for, & now youve found it. Its pretty straightforward
- mix equal parts together, leave them to set & voila, youre a resin pro. This exceptional craft resin is officially certified safe to use at home & has a super easy 1:1 mix ratio with the very latest anti-yellowing tech inside. VOC, solvent & BPA free, with little to no odour & touch dry in 4-5 hours. Coat-it resin holds patterns beautifully, due to it being so thick, & has excellent bubble release when part A is warmed. Coat-it can be used as a food-safe coating & as it is super-shiny it will guarantee you the very best, premium finish every time. When you thought it just couldnt get any better, weve knocked it out of the park with this fact... Coat-it is made from materials that would otherwise enter landfill (as its a by-product of the oil industry). So, buying coat-it epoxy resin from Resin 8 means you can create beautiful pieces whilst preventing waste.   Resin 8 coat-it epoxy resin is a modern formulation of the safest epoxy chemicals available. However, all epoxy resins are chemicals & they do come with Health & Safety implications & instructions, for which it is your responsibility to follow: Top Tips You must wear nitrile gloves (or use a specialist resin barrier cream on your hands & unprotected skin). You must wear a respirator when sanding partially-cured resin. You do not need to wear one when pouring this resin. Work with this resin in a well ventilated room (open the window, door, etc). We advise you to wear safety goggles. Avoid skin contact. We advise against eating, drinking or smoking while working. In case of eye contamination wash with plenty of water for 15 minutes & consult medical advice immediately. Resin 8 coat-it epoxy resin has been certified by the ASTM (American Society for Testing & Materials) as non-toxic when used as directed & conforms to ASTM D-4236. It contains no VOCs, no solvents & doesnt give off fumes when used at room temperature. It is non-flammable & has a very mild odour & therefore safe for home use. It is certified as safe for incidental food contact. As with any epoxy resin, it is not suitable for use on anything that comes into direct contact with the mouth (e.g. a cup) or as a cutting surface.

...

Coat-it is the ultimate all-purpose resin for art, craft & jewellery. Not only does it provide you with an exceptionally durable, glossy finish, its also crystal-clear, cruelty-free, non-toxic, uv stable & vegan-friendly. Use coat-it resin for almost everything your creative mind can dream of
- creating artwork & seascapes, use as a glossy proffesional finish for paintings, cast unique jewellery in shallow silicone moulds. Coat-it is the resin youve been looking for, & now youve found it. Its pretty straightforward
- mix equal parts together, leave them to set & voila, youre a resin pro. This exceptional craft resin is officially certified safe to use at home & has a super easy 1:1 mix ratio with the very latest anti-yellowing tech inside. VOC, solvent & BPA free, with little to no odour & touch dry in 4-5 hours. Coat-it resin holds patterns beautifully, due to it being so thick, & has excellent bubble release when part A is warmed. Coat-it can be used as a food-safe coating & as it is super-shiny it will guarantee you the very best, premium finish every time. When you thought it just couldnt get any better, weve knocked it out of the park with this fact... Coat-it is made from materials that would otherwise enter landfill (as its a by-product of the oil industry). So, buying coat-it epoxy resin from Resin 8 means you can create beautiful pieces whilst preventing waste.   Resin 8 coat-it epoxy resin is a modern formulation of the safest epoxy chemicals available. However, all epoxy resins are chemicals & they do come with Health & Safety implications & instructions, for which it is your responsibility to follow: Top Tips You must wear nitrile gloves (or use a specialist resin barrier cream on your hands & unprotected skin). You must wear a respirator when sanding partially-cured resin. You do not need to wear one when pouring this resin. Work with this resin in a well ventilated room (open the window, door, etc). We advise you to wear safety goggles. Avoid skin contact. We advise against eating, drinking or smoking while working. In case of eye contamination wash with plenty of water for 15 minutes & consult medical advice immediately. Resin 8 coat-it epoxy resin has been certified by the ASTM (American Society for Testing & Materials) as non-toxic when used as directed & conforms to ASTM D-4236. It contains no VOCs, no solvents & doesnt give off fumes when used at room temperature. It is non-flammable & has a very mild odour & therefore safe for home use. It is certified as safe for incidental food contact. As with any epoxy resin, it is not suitable for use on anything that comes into direct contact with the mouth (e.g. a cup) or as a cutting surface.

...

JESMONITE AC300 is a eco-friendly casting material loved by craftspeople around the world from artists to architects, sculptors to interior designers. Perfect for beginners, non-toxic, easy to use with beautiful results.  Made from a modified gypsum powder mixed with an acrylic (water-based) resin, this off-white building material is truly unbeatable. Its the ultimate chameleon material… use JESMONITE for castings, sculptures, homewares & intricate detailing in jewellery. Suitable for use by children aged 10+ It’s smooth, tactile, heat resistant & touch dry in 30 minutes! It’s eco-friendly in its own right, but its also packaged in fully compostable, biodegradable or easily recyclable containers.  Each size comes with a pack of modified gypsum power & water-based acrylic resin. Avaliable in 2 sizes
- 280g  (200g BASE & 80g LIQUID
- in recyclable containers)  & 1.4kg (1kg BASE & 400g LIQUID
- in recyclable containers) Mix Ratio: 2.5 parts BASE: 1 part LIQUID (e.g. 10g powder = 4g liquid 100g powder = 40g liquid) Stir thoroughly for 2 minutes Working time: 20 minutes (can be doubled using a drop or two of slow-it retarder) Can be thickened using thicken-it thixotrope (for use on curved surfaces)


...

JESMONITE AC300 is a eco-friendly casting material loved by craftspeople around the world from artists to architects, sculptors to interior designers. Perfect for beginners, non-toxic, easy to use with beautiful results.  Made from a modified gypsum powder mixed with an acrylic (water-based) resin, this off-white building material is truly unbeatable. Its the ultimate chameleon material… use JESMONITE for castings, sculptures, homewares & intricate detailing in jewellery. Suitable for use by children aged 10+ It’s smooth, tactile, heat resistant & touch dry in 30 minutes! It’s eco-friendly in its own right, but its also packaged in fully compostable, biodegradable or easily recyclable containers.  Each size comes with a pack of modified gypsum power & water-based acrylic resin. Avaliable in 2 sizes
- 280g  (200g BASE & 80g LIQUID
- in recyclable containers)  & 1.4kg (1kg BASE & 400g LIQUID
- in recyclable containers) Mix Ratio: 2.5 parts BASE: 1 part LIQUID (e.g. 10g powder = 4g liquid 100g powder = 40g liquid) Stir thoroughly for 2 minutes Working time: 20 minutes (can be doubled using a drop or two of slow-it retarder) Can be thickened using thicken-it thixotrope (for use on curved surfaces)


...