United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Flash Accessory Starter Kit
The HONL starter kit includes one each of the following accessories: Speed Strap 1/4 Speed Grid 1/8 Speed Grid Speed Gobo / Barndoor 8" Snoot 5" Snoot Rosco Correction/effects kit Speed Strap: Put an end to rubber bands, tape or sticky residue from gluing Velcro to your expensive strobes. The Speed Strap fits any shoe-mount strobe unit, attaches and removes in seconds and provides a large wraparound surface area to wuickly attach a combination of HONL's Speed Gobos, Snoots, Gels and upcoming Speed Grids. Non-slip so it won't budge when attached. 1/4 Speed Grid: Speed Grids attach quickly and easily to most portable flash units using HONL's non-slip Speed Strap (sold separately). The1/4 Speed Grid has a 1/4" honeycomb cell size to narrow the beam of light from your portable flash
unit, producing a small circle of light on your subject. Fits most any shoe mount and most handle mount portable strobes, including Canon 420 though 580 and Nikon SB24 though SB900. Attaches quickly and easily to our Speed Strap mounting system (not included, sold separately). Usable honeycomb area is 3.5" x 2.25" (appr. 89mm x 58mm)- simply measure the front outside dimensions of your flash lens to assure fit. Rugged ABS/polycarbonate construction. Patent pending design. individual strobes (measure the surface area of the front of your strobe to check fit). 1/8 Speed Grid: The 1/8 Speed Grid has a 1/8" honeycomb cell size to narrow the beam of light from your portable flash unit, producing a small circle of light on your subject. Fits most any shoe mount and most handle mount portable
strobes, including Canon 420 though 580 and Nikon SB24 though SB900. Attaches quickly and easily to our Speed Strap mounting system (not included, sold separately). Usable honeycomb area is 3.5" x 2.25" (appr. 89mm x 58mm)- simply measure the front outside dimensions of your flash lens to assure fit. Rugged ABS/polycarbonate construction. Patent pending design. Speed Gobo/Barndoor: Keep light from flaring into your lens when using your speedlight as a background or hair light. TheSpeed Gobo attaches quickly with a Speed Strap (required, not included, see below). Reversible, tough ballistic-type black nylon on one side, white polymer on the other so you can also use as a bounce card. Keep light from flaring into your lens when using your speedlight as a background or hair light. Our
Speed Gobo attaches quickly with a Speed Strap (required, not included, see below). Reversible, tough ballistic-type black nylon on one side, white polymer on the other so you can also use as a bounce card. 8" Snoot: Concentrate the light from your shoe-mount flash for dramatic cinematic lighting with my easy to use snoot. Perfect for everything from dramatic portraits to concentrating light on background elements. Attaches and removes in seconds using my popular Speed Strap (not included, see below). Made of tough ballistic nylon with grey interior that produces a soft falloff. Fits most any on-camera shoe-mount strobe. 8.5" long. Exclusive Patent Pending design. Speed Snoots are adjustable to fit a wide variety of flashes, including Canon's 430 to 580 Speedlites and Nikon's
SB24 to SB900 Speedlights. Measure the outside circumference of your flash, then add 1.25" (32mm) for the added thickness of the required Speed Strap. If your final measurement falls between 8.5" (21cm) to 10.5" (27cm) the Speed Snoot will fit properly on your flash. 5" Snoot: Concentrate the light from your shoe-mount flash for dramatic cinematic lighting with our easy to use snoot. Perfect for everything from dramatic portraits to concentrating light on background elements. Attaches and removes in seconds using my popular Speed Strap (not included, see below). Made of tough ballistic nylon with grey interior that produces a soft falloff. Fits most any on-camera shoe-mount strobe including Canon 420 through 580 and Nikon SB24 through SB900. 5" long. Exclusive Patent Pending design.
Speed Snoots are adjustable to fit a wide variety of flashes, including Canon's 430 to 580 Speedlites and Nikon's SB24 to SB800 Speedlights. Measure the outside circumference of your flash, then add 1.25" (32mm) for the added thickness of the required Speed Strap. If your final measurement falls between 8.5" (21cm) to 10.5" (27cm) the Speed Snoot will fit properly on your flash. Rosco correction/effects kit: If you've never tried colouring your strobe lighting, this is a perfect kit to get you started. These superior quality Rosco gels are pre-cut and attach quickly and securely to our HonlPhoto Speed Strap, and can be used in conjunction with our Snoots, Gobos, and Grids. Usable gel area is 2.5" x 4" and can be trimmed to fit individual strobes (measure the surface area of the front
of your strobe to check fit).
unit, producing a small circle of light on your subject. Fits most any shoe mount and most handle mount portable strobes, including Canon 420 though 580 and Nikon SB24 though SB900. Attaches quickly and easily to our Speed Strap mounting system (not included, sold separately). Usable honeycomb area is 3.5" x 2.25" (appr. 89mm x 58mm)- simply measure the front outside dimensions of your flash lens to assure fit. Rugged ABS/polycarbonate construction. Patent pending design. individual strobes (measure the surface area of the front of your strobe to check fit). 1/8 Speed Grid: The 1/8 Speed Grid has a 1/8" honeycomb cell size to narrow the beam of light from your portable flash unit, producing a small circle of light on your subject. Fits most any shoe mount and most handle mount portable
strobes, including Canon 420 though 580 and Nikon SB24 though SB900. Attaches quickly and easily to our Speed Strap mounting system (not included, sold separately). Usable honeycomb area is 3.5" x 2.25" (appr. 89mm x 58mm)- simply measure the front outside dimensions of your flash lens to assure fit. Rugged ABS/polycarbonate construction. Patent pending design. Speed Gobo/Barndoor: Keep light from flaring into your lens when using your speedlight as a background or hair light. TheSpeed Gobo attaches quickly with a Speed Strap (required, not included, see below). Reversible, tough ballistic-type black nylon on one side, white polymer on the other so you can also use as a bounce card. Keep light from flaring into your lens when using your speedlight as a background or hair light. Our
Speed Gobo attaches quickly with a Speed Strap (required, not included, see below). Reversible, tough ballistic-type black nylon on one side, white polymer on the other so you can also use as a bounce card. 8" Snoot: Concentrate the light from your shoe-mount flash for dramatic cinematic lighting with my easy to use snoot. Perfect for everything from dramatic portraits to concentrating light on background elements. Attaches and removes in seconds using my popular Speed Strap (not included, see below). Made of tough ballistic nylon with grey interior that produces a soft falloff. Fits most any on-camera shoe-mount strobe. 8.5" long. Exclusive Patent Pending design. Speed Snoots are adjustable to fit a wide variety of flashes, including Canon's 430 to 580 Speedlites and Nikon's
SB24 to SB900 Speedlights. Measure the outside circumference of your flash, then add 1.25" (32mm) for the added thickness of the required Speed Strap. If your final measurement falls between 8.5" (21cm) to 10.5" (27cm) the Speed Snoot will fit properly on your flash. 5" Snoot: Concentrate the light from your shoe-mount flash for dramatic cinematic lighting with our easy to use snoot. Perfect for everything from dramatic portraits to concentrating light on background elements. Attaches and removes in seconds using my popular Speed Strap (not included, see below). Made of tough ballistic nylon with grey interior that produces a soft falloff. Fits most any on-camera shoe-mount strobe including Canon 420 through 580 and Nikon SB24 through SB900. 5" long. Exclusive Patent Pending design.
Speed Snoots are adjustable to fit a wide variety of flashes, including Canon's 430 to 580 Speedlites and Nikon's SB24 to SB800 Speedlights. Measure the outside circumference of your flash, then add 1.25" (32mm) for the added thickness of the required Speed Strap. If your final measurement falls between 8.5" (21cm) to 10.5" (27cm) the Speed Snoot will fit properly on your flash. Rosco correction/effects kit: If you've never tried colouring your strobe lighting, this is a perfect kit to get you started. These superior quality Rosco gels are pre-cut and attach quickly and securely to our HonlPhoto Speed Strap, and can be used in conjunction with our Snoots, Gobos, and Grids. Usable gel area is 2.5" x 4" and can be trimmed to fit individual strobes (measure the surface area of the front
of your strobe to check fit).
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark