Calumet cables ensure safe, optimal performance & the fastest data transfer rates for your equipment. Our cable engineers have utilized the highest quality materials & have developed a comprehensive selection of products to support the latest emerging technology. From cameras & scanners to printers & computers, Calumet cables keep you connected.

Features: 22-gauge, high-performance. power wires ensure maximum Fire Wire performance High-speed data transfer up to 800 Mbps Gold-plated copper contacts provide maximum conductivity, minimal data loss & prevent corrosion Foil & braid quad-shield construction exceeds IEEE 1394b standards Outer shield & ferrite core reduces radio frequency & electromagnetic interference (RFI/EMI) Hot swappable Plug-&-play technology Signal-twists technology minimizes cross talk & transmission error Attaches a device, ? Compatible with all Apple Fire Wire Lifetime Calumet warranty

...

A stylish metal finish of the optional FL-14 flash gives the camera a retro-look reminiscent of the classic Olympus Pen F. The FL-14 matches perfectly to the external design of the E-P1 & it expands the oppertunities not only under low light conditions, but gives also creative options in nearly every situation. Stylish design with metal exterior Control settings directly from the camera LCD Compact with a weight of only 84g Red-eye reduction, slow synchronisation & second curtain synchronisation Option of TTL Auto, Auto & Manual modes Guide number 14 (ISO 100) Fits two AAA batteries (recommended: alkaline or Ni MH) ...

Fomex FL-600 1'x 1' / 30cm x 30cm Flexible LED Ready-to-Shoot Kit Flexible & Lightweight LED Light Mat for Professional Filmmaking & Photography. Produced by experienced lighting manufacturer Fomex, the FL-600 is a flexible LED light mat specifically designed for use by filmmakers & stills photographers. Key

Features: 360° pliability for use in confined & obscure spaces Thin & lightweight – FL-600 mat weights just 387g Emulate regular rigid lighting fixtures with the included ‘X-Mount’ Weatherproof mat with IP64 rain & dust protection rating Innovative heat sink means LEDs are always cool to touch CRI 96 / TLCI 98 ensuring accurate & pure light output Powerful – 2100 LUX at 1 meter in daylight colour temperature mode Completely flicker-free light output Colour temperature range of 3200°K to 5600°K Precise dimming control from 1-100% Ergonomic controller with built-in V-Mount battery plate Range of accessories including light modifiers & mounts Unrivalled two year warranty for complete piece of mind   Combining low weight, thin design & 360° pliability into an LED lighting fixture permits previously impossible mounting, positioning & operation. The LED mats can be adhered directly to walls, windows or virtually any surface – curved or otherwise.   The mat’s top & bottom edges incorporate durable wire tubing – once operators flex the mat, it remains in the desired shape.  Its bendable & compact design allows it to be easily concealed in tight spaces on-set, whilst also making storage & travel a breeze.   The included ‘X-Mount’ also allows the mats to emulate a regular rigid lighting fixture – incorporating a 16mm female spigot for mounting on light stands or other lighting grip. With the FL-600 weighing just 387g, the optional boom pole enables fast & efficient overhead lighting without the need for a large & cumbersome lighting rig.   Weather Protected. For ultimate practicality, the FL-600 light mat has been designed for all-weather use, with an IP64 rain & dust protection rating. This makes the light equally at home in a studio or anywhere on location, regardless of weather & environmental factors. For location use, it opens up possibilities to shoot in the rain, snow or even a desert.   Water & dust resilience also makes maintenance easier, as the mats can simply be wiped down with a wet cloth when required.   Ultimate Control. With a colour temperature range of 3200°K to 5600°K & precise dimming from 1 to 100%, the FL-600 is as flexible in operation as it is in form.   These settings are adjusted using the simple & intuitive lighting controller. Its backlit LCD panel displays the current colour temperature & brightness values, with changes made using the dials on either side. To avoid accidental adjustment or damage, these dials are protected with metal surrounds.   Located on the controller’s rear side is a V-Mount battery plate which is used for powering the light when AC power is not available. For users who do not own or operate with V-Mount batteries, the FL-4in 1-SLVA battery adaptor offers an alternative power solution. It uses NPF type batteries to replicate a regular V-Mount battery.   An included adaptor shoe allows the controller to dock directly to a regular Super Clamp. The Super Clamp can be attached to a lighting st&, ensuring the controller is accessible to make quick setting adjustments.   When used & operated on the move, the controller can be held on the operators shoulder thanks to the built-in strap attachment point.   Accurate & Powerful. The FL-600’s impressive physical characteristics are backed-up by equally-notable photometric data. Colour rendering test results of CRI 96 & TLCI 98 ensure the light output virtually mimics that of natural light sources. This ensures colour reproduction is true-to-life, making post-production & colour grading more straightforward.   In spite of its slight nature, the FL-600 can match traditional 1’x 1’ lighting fixtures for power, delivering a light output of 2100 LUX at 1 meter.   Despite its remarkably thin, lightweight & flexible design, Fomex have developed an effective heat dispersion method, meaning, even with hours of continuous operation, the LEDs will always be cool to touch.    Ready-to-Shoot. For absolute simplicity, Fomex offer a single, ready-to-shoot kit which is professionally presented in a bespoke carry bag. The FL-600-KIT

Includes:: everything necessary to get shooting including the LED mat, X-Mount, controller, AC power supply, UK IEC cable & 5m controller extension cable.   Optional accessories include a softbox (FL-600-SB), 4-leaf barndoors (FL-600-BD), 3-section boom pole (FL-BP), mounting cheeseplate (FL-CP) & cheeseplate with ball head combo (FL-CPBH).   Fomex products are designed & manufactured to the highest technical & quality standards, backed-up by an unrivalled two year warranty.  



...

This Hot Shoe Flash Cable allows TTL off-camera flash operation with FL-40 flash. It can also be used with any standard hot shoe flash. ...

The HONL starter kit

Includes:: one each of the following accessories: Speed Strap 1/4 Speed Grid 1/8 Speed

...

Connects flashes compatible with the SCA 3002 system to Hasselblad H1 ...

The Sunbounce Flash-Bracket for MICRO-MINI, MINI+PRO allows hot shoe flashes/speedlights to be easily mounted to Sunbounce reflectors. ...

A must accessory for off-camera flash photography, these cords feature a metal shoe mount for the flash unit & 18k gold-plated contacts. They work with digital & traditional film-based cameras with a hot shoe. ...

A must accessory for off-camera flash photography, these cords feature a metal shoe mount for the flash unit & 18k gold-plated contacts. They work with digital & traditional film-based cameras with a hot shoe. ...

The team at Rogue have developed quick & easy to use Flash Correction Gels that require no holders, or velcro attachments, just gels & a silicone moulded elastic b&. The system can be attached to any shoe mounted flash unit & means that you can swap out gels with ease. The correction gels allow you to improve overall colour balance by adjusting the colour temperature of the flash to match the light sources you are shooting in. There are three main gels used to correct: Colour Temperature Orange (CTO) to colour balance flash to incandescent, tungsten or halogen ambient light sources. Colour Temperature Blue (CTB) to colour balance flash to shade or blue sky ambient light sources. Plus Green Gels in combination with CTO gels to colour balance flash to fluorescent ambient light sources. To make it easier for you the gels have the following information printed on them; the LEE filter name, measured f stop loss value, Kelvin colour temperature & the camera white balance icon you should use. You will have to identify your light source, select the correct gel (s) & put it on your flash unit. It is important that you then set a custom white balance or set the camera to the same icon shown on the gel. ...