Calumet's Background Paper has a high-quality, fine-tooth nonreflecting surface that enhances your photography. Just add a background stand & these rolls instantly become sweeps. We make an extra effort to make sure your background paper arrives safely. Calumet Background Paper is wrapped in a plastic sleeve to trap out moisture & dirt, then packed in a sturdy tube or carton for maximum protection Note: While every effort was made to ensure accurate colour reproduction of the products shown here, some variances may occur on screen. ...

These CLEANING STRIPS are used to clean dust & fibers from DUST-AID Platinum silicone before the DUST-AID Platinum is used on a sensor filter. The CLEANING STRIPS are made with a specially formulated adhesive that will not transfer to DUST-AID Platinum. Purchasing additional CLEANING STRIPS will allow the user to lengthen the life span & use of DUST-AID Platinum. • Cleans dust from Platinum Silicone • 12 cleanings per package • Adhesive will not transfer to silicone • Safe & easy to use To use the cleaning strip all you need to do is remove one white tab to expose the cleaning adhesive, place the Platinum silicone flat onto the adhesive, remove the silicone from the adhesive & replace the white tab backwards onto the adhesive so you will know you used that section. NOTE: You might want to clean the sides of the silicone also. To do this first clean the base of the silicone with the cleaning strip & then the four exposed silicone side walls. ...

DUST-AID™ Platinum takes dry sensor cleaning to a whole new level. dust-Aid have taken dry sensor filter cleaning to a whole new level with the introduction of our new, patent pending, Platinum DSLR Cleaner. It's now possible to clean any sensor filter no matter its coating or internal dust removal system (IDRS) filter housing. & to top it off, it can clean its own platinum cured cleaning silicone with specially made cleaning strips, extending it's cleaning life span. The specially engineered cleaning silicone used in the new Platinum DSLR Cleaner makes it perfectly safe to use on any sensor filter. No more dragging dry brushes & their accumulated dust across the sensor filter, which could lead to scratching. Now, just press & lift a couple of times & your done! 1. Safely cleans uncoated sensor filters. We've tested the Platinum on uncoated sensor filters with no affect to the sensor filter. 2. Safely cleans ITO & Dichroic sensor filters. We've tested the Platinum on ITO, Dichroic & weak coated sensor filters with no affect to the sensor filter coatings. 3. Safely cleans I.D.R.S.* sensor filters. We've tested the Platinum on multiple IDRS sensor filters with no affect to the intenal dust removal system housing or sensor filter alignment. One of the biggest features with the new Platinum cleaner is its ability to have the cleaning silicone repeatedly cleaned free of accumulated dust & fibers. This means that you could have a lifetime of use out of the Platinum cleaner. The Platinum cleaner comes with 6 silicone cleaning applications & with the purchase of additional cleaning strips the life span of the Platinum could be extended indefinitely. The cleaning adhesive used to clean the Platinum silicone has been developed & tested not to transfer any of the adhesive to the silicone. The Platinum DSLR Cleaner is made from a specially manufactured platinum cured silicone that does not use any molds or mold release agents in its creation. This eliminates the chance of mold release agents permanently bonding & contaminating the silicone when it's molded. The use of this specially engineered silicone is patent pending. The Platinum silicone also has a patent pending micro texture on the cleaning surface which helps to stop the formation of a vacuum seal when it's applied to a cleaning surface. When the silicone is depressed on a surface the micro texture flattens out & adheres to any dust or fibers. Then, when the pressure is released the micro texture flex's back into place & allows air in, breaking the vacuum seal. This helps to reduce the adhesion strength & impact of the cleaning. We have eliminated every possible contamination to the cleaning silicone but there is a built in factor that no rubber or polyethylene cleaner has control over, internal oils. These blends of cohesive materials use oils that make them soft & allow them to pick up dust & fibers. We have designed our cleaning silicone not to transfer these oils to a surface when applied in a straight, up-down manor. If you where to drag the silicone on its side or twist the silicone it could leave residue. This residue can be easily removed with our DUST-WAND KIT™. But, if you follow the directions & lift the cleaner straight up & down then you will have no problem. Cleaning finger & camera oil from silicone: If you happen to get finger or camera oil on the Platinum silicone then it's very easy to remove. Simply clean the silicone with our DUST-CLOTH & ULTRA CLEAN liquid & then use the Cleaning Strips to remove any fibers. Test the Platinum silicone before use on a piece of clean glass, like a common UV HAZE filter, to see if you removed all of the oil. Repeat as needed. It's advised to test the Platinum silicone on a piece of clean glass before use due to possible accidental skin contact which can contaminate the cleaning surface of the silicone. ...

Product Information This is a Genuine Original replacement lamp for a SANYO PLC-SU50. The Lamps & Bulbs we sell for Data- & Video-Projectors & Rear-Projection TVs are of finest top quality & cover a wide range of Makes & Models ...

The Plus III Transceiver features an impressive 32 channels. Whether you’re a wedding or sports shooter or working in a busy studio, finding a clear channel is never a problem. Selective Quad-Zone Triggering, a feature once reserved for elite photographers, adds four zones enabling photographers to remotely trigger flash & or cameras in groups or individually. For photographers being asked to do more for less, this added flexibility is a huge competitive advantage. The Plus III is simple to operate. The soft-touch keypad is large & intuitive & a beautifully backlit LCD panel displays everything you need to know. All of this is presented in a sleek, side-view design which reduces the viewing obstruction while conveniently positioning all controls. The precision-tuned antenna is housed inside the case of the radio for better durability. The Plus III adds to the legendary Plus reliability with a working range that will meet photographer’s everyday needs. For more challenging environments or distances, there are two added features to improve range & reliability. Long Range Mode (LR) will roughly double the working range & is ideal for remote camera triggering. Repeater Mode (RP) allows the addition of one or more radios in between the transmitting & receiving radios to overcome distance, obstacles or other interference. RP mode works well for both remote camera triggering & remote flash triggering. Like the Plus II, the Plus III is an Auto-Sensing Transceiver which means it will automatically switch between transmit & receive as needed. This is very useful when syncing remote cameras to remote flash. When the receiving radio on a remote camera receives a trigger, it can automatically engage Auto-Relay Mode & send a trigger signal out on the next higher channel. This triggers remote flash completely in-sync with the remote camera. Remote camera users will love the new Two-Stage Trigger feature. The TEST button on the Plus III acts like a camera’s shutter release with “half-press”. Use this unique feature to wake, focus & meter a remote camera before triggering. Pressing TEST all the way triggers the remote camera. Also, with a Plus III on a h&-held camera connected with a Pocket Wizard ACC cable to the motor-drive port, that camera’s shutter release will also wake & prepare a remote camera for shooting. With remote camera triggering you can deliver two or more images for every push of the button & capture multiple angles all at the same time. Of course, the Plus III is reverse-compatible with all Pocket Wizard radios, making it the perfect addition to existing gear. It is especially well paired with the Multi MAX which has the same set of 32 channels & four zones. The Plus III can fire at sustained triggering rates of up to a blazing 14.5 frames per second. Two AA batteries can power the Plus III up to 50 hours & when needed for remote camera triggering, it can be powered with an external battery through the Mini-B USB (Universal Serial Bus) 2.0 port. The USB (Universal Serial Bus) port can also be used for firmware updates. Whether new to remote triggering of cameras & flashes or a top professional pushing gear to the limits, the Plus III’s reliability, simplicity & performance make it the perfect tool for the job. The Plus III is the new standard of excellence. ...

Pocket Wizard Plus IV Transceiver (Single) You now have the best of both worlds in one easy-to-use, reliable wireless trigger. The Plus IV Auto-Sensing Transceiver allows photographers the benefit of on-camera TTL flash combined with remote manual flash. When used as a transmitter, the top shoe provides on-camera TTL compatibility with most Canon, Nikon, Panasonic, Fuji & Olympus cameras & flashes. When used as a receiver, the top shoe pairs with virtually any speedlight for easy mounting & manual power adjustment of a remote flash. Built on the reliability & simplicity of the Pocket Wizard PLUS legacy line of products & loaded with numerous features & functionality, the Plus IV Transceiver is the “go to” radio when a fast set-up is required. The Plus IV features 32 channels (16 Standard plus 16 Quad-Zone Triggering channels) allowing you to activate or deactivate your remote flashes or cameras wirelessly in 4 separately controllable zones (A, B, C or D). Whether you shoot portraits, weddings or sports, having the ability to combine on-camera TTL flash with remote manual flash provides you with a huge competive edge. KEY

Features: On Camera TTL Flash / Remote Manual Flash Quad-Zone Triggering Auto-Sensing Transceiver Metal Foot Auto-Relay Mode Long Range Capability Repeater Mode (RP) High Speed Receive External Power & Firmware Upgradeable Pocket Wizard Reverse Compatible Simple User Interface KEY BENEFITS FOR PHOTOGRAPHERS: On Camera TTL Flash / Remote Manual Flash: On-camera TTL compatibility with most Nikon, Canon & Panasonic cameras & flashes & some Fuji & Olympus gear. Quad-Zone Triggering: Activate or deactivate up to four zones of remote flashes or cameras. Auto-Relay Mode: Allows photographers to trigger a remote camera in sync with one or more remote flashes. Simple User Interface: All channels, zones & modes can be easily engaged via a keypad input & displayed on a backlit 2.5cm (1”) LCD display.  

...

The Plus X is the simplest Pocket Wizard radio ever & the perfect entry into the Pocket Wizard Wireless System. How simple? Attach one Plus X to your camera, another Plus X to a remote flash using an included cable, set both radios to the same channel & start taking pictures. The Plus X is compatible with all Standard Channel-capable Pocket Wizard transmitters & receivers, so it's the perfect companion for your existing radios & new flashes. 10 Standard Channels With the Plus X’s 10 Standard Channels you can work in your own “zone.” Claim your own channel for exclusive triggering when working with other photographers at crowded events. Use different channels for different setups or looks & select them simply & intuitively with the turn of a dial. & these 10 channels are compatible with every Pocket Wizard ever made* set to Standard Channels 1 – 10. (* radios of the same frequency) Backlit Channel Dial Setting channels is as easy as turning a dial. The backlit channel dial clearly displays the set channel & because the backlight consumes so little power, it stays on all the time for convenience. Internal Antenna The Plus X features a durable, side profile design with an unobtrusive, internal antenna minimizing visual obstruction between you & your subject. By utilizing an internal antenna, there’s no chance to kink or break it when on location. The total height of the transceiver & antenna is less than 4.2 inches, & it weighs only 4 ounces, including batteries. Easily Connected / Cable Port On your camera, the Plus X slides into the hot shoe with no cables required. For your remotes, it features one do-it-all miniphone (3.5mm or 1/8”) sync port. The miniphone connector is much more reliable than a PC connection & every Plus X comes complete with a miniphone-to-miniphone cable, a miniphone-to-phono (1/4" or 6.3mm) adapter for triggering the majority of modern flashes, & a miniphone to locking PC cable for triggering some remote speedlights or for using your Plus X on-camera when you can’t put it in a hot shoe. Other miniphone connector cables are available for major brands of lighting equipment in a variety of lengths. Dedicated remote camera triggering cables are also available for popular camera systems. Auto-Sensing Transceiver With our patented Auto-Sensing Transceiver Technology, the Plus X Transceiver is one smart radio. The Plus X will instantly & intelligently switch between transmitter & receiver modes keeping setup as simple as possible. The Plus X may be set to Transmit (Tx) only when needed. Auto-Relay Mode Our Auto-Sensing Transceiver Technology lets you trigger a remote camera in sync with remote flashes using only 3 Pocket Wizard radios: the one in your hands, a Plus X cabled to your remote camera, & the one connected to your remote flash. The Plus X cabled to your remote camera will receive a radio signal & trigger the camera’s motor drive, then switch to transmit mode & trigger your Pocket Wizard-connected remote flashes on the next channel up, all automatically. Start the sequence by simply pressing the TEST button of any Pocket Wizard transmitter in your hands. Remote cameras require motor drive cables. Find the correct cable for your gear using the Pocket Wizard Cable Finder. Status Indicator/ Battery Life Indicator The Plus X features a tri-colour LED status indicator that serves two functions. When the Plus X sends or receives a triggering signal, the LED will glow red. During normal operation, the indicator will blink a single green blink meaning it is operating normally & the battery life is above 50%. It will blink a double amber blink when the battery is below 50% but above 25% & it will blink three red blinks when the battery life is below 25% & it’s crucial to replace the batteries. Transmit Only Mode There are times when you only want your radio to transmit, usually when two or more photographers are sharing a set of lights. By enabling transmit only mode, you disable the receive & auto-relay functions to make sure all your radio is doing is transmitting. Range & Reliability Pocket Wizard Plus radios are known for their range & reliability. Although the Plus X costs less than other Pocket Wizard radios, you still get the range & reliability you’d expect. Sync Speed Ultra-fast microprocessors allow for reliable sync speeds of 1/250 for focal plane shutters & 1/500 for leaf shutters. Pocket Wizard Compatible The Plus X is compatible with all Pocket Wizard transmitters & receivers including Pocket Wizard-enabled photo gear from Profoto, Dynalite, Norman, Photogenic & Sekonic light meters. The Pocket Wizard Wireless System allows for total flexibility with whatever lights or cameras you may be working with. Compatibilty: Compatible for use with industry standard hot shoes, PC sync terminals, etc. Safe 3 volts sync voltage for modern digital camera systems. Compatible with most flashes & triggering circuits. Can handle up to 300 volts. See our cables & adapters section for appropriate connecting cables. ...

The Plus X is the simplest Pocket Wizard radio ever & the perfect entry into the Pocket Wizard Wireless System. How simple? Attach one Plus X to your camera, another Plus X to a remote flash using an included cable, set both radios to the same channel & start taking pictures. The Plus X is compatible with all Standard Channel-capable Pocket Wizard transmitters & receivers, so it's the perfect companion for your existing radios & new flashes. 10 Standard Channels With the Plus X’s 10 Standard Channels you can work in your own “zone.” Claim your own channel for exclusive triggering when working with other photographers at crowded events. Use different channels for different setups or looks & select them simply & intuitively with the turn of a dial. & these 10 channels are compatible with every Pocket Wizard ever made* set to Standard Channels 1 – 10. (* radios of the same frequency) Backlit Channel Dial Setting channels is as easy as turning a dial. The backlit channel dial clearly displays the set channel & because the backlight consumes so little power, it stays on all the time for convenience. Internal Antenna The Plus X features a durable, side profile design with an unobtrusive, internal antenna minimizing visual obstruction between you & your subject. By utilizing an internal antenna, there’s no chance to kink or break it when on location. The total height of the transceiver & antenna is less than 4.2 inches, & it weighs only 4 ounces, including batteries. Easily Connected / Cable Port On your camera, the Plus X slides into the hot shoe with no cables required. For your remotes, it features one do-it-all miniphone (3.5mm or 1/8”) sync port. The miniphone connector is much more reliable than a PC connection & every Plus X comes complete with a miniphone-to-miniphone cable, a miniphone-to-phono (1/4" or 6.3mm) adapter for triggering the majority of modern flashes, & a miniphone to locking PC cable for triggering some remote speedlights or for using your Plus X on-camera when you can’t put it in a hot shoe. Other miniphone connector cables are available for major brands of lighting equipment in a variety of lengths. Dedicated remote camera triggering cables are also available for popular camera systems. Auto-Sensing Transceiver With our patented Auto-Sensing Transceiver Technology, the Plus X Transceiver is one smart radio. The Plus X will instantly & intelligently switch between transmitter & receiver modes keeping setup as simple as possible. The Plus X may be set to Transmit (Tx) only when needed. Auto-Relay Mode Our Auto-Sensing Transceiver Technology lets you trigger a remote camera in sync with remote flashes using only 3 Pocket Wizard radios: the one in your hands, a Plus X cabled to your remote camera, & the one connected to your remote flash. The Plus X cabled to your remote camera will receive a radio signal & trigger the camera’s motor drive, then switch to transmit mode & trigger your Pocket Wizard-connected remote flashes on the next channel up, all automatically. Start the sequence by simply pressing the TEST button of any Pocket Wizard transmitter in your hands. Remote cameras require motor drive cables. Find the correct cable for your gear using the Pocket Wizard Cable Finder. Status Indicator/ Battery Life Indicator The Plus X features a tri-colour LED status indicator that serves two functions. When the Plus X sends or receives a triggering signal, the LED will glow red. During normal operation, the indicator will blink a single green blink meaning it is operating normally & the battery life is above 50%. It will blink a double amber blink when the battery is below 50% but above 25% & it will blink three red blinks when the battery life is below 25% & it’s crucial to replace the batteries. Transmit Only Mode There are times when you only want your radio to transmit, usually when two or more photographers are sharing a set of lights. By enabling transmit only mode, you disable the receive & auto-relay functions to make sure all your radio is doing is transmitting. Range & Reliability Pocket Wizard Plus radios are known for their range & reliability. Although the Plus X costs less than other Pocket Wizard radios, you still get the range & reliability you’d expect. Sync Speed Ultra-fast microprocessors allow for reliable sync speeds of 1/250 for focal plane shutters & 1/500 for leaf shutters. Pocket Wizard Compatible The Plus X is compatible with all Pocket Wizard transmitters & receivers including Pocket Wizard-enabled photo gear from Profoto, Dynalite, Norman, Photogenic & Sekonic light meters. The Pocket Wizard Wireless System allows for total flexibility with whatever lights or cameras you may be working with. Compatibilty: Compatible for use with industry standard hot shoes, PC sync terminals, etc. Safe 3 volts sync voltage for modern digital camera systems. Compatible with most flashes & triggering circuits. Can handle up to 300 volts. See our cables & adapters section for appropriate connecting cables. ...

Auto extension ring with AI diaphragm coupling. Extension: 52.5mm. ...

Kaiser Fototechnik stands for photographic & digital products for enthusiasts & professionals. Kaiser Fototechnik stands for a philosophy to create lines & products that are modular so they can be easily adapted to the user's requirements & can grow with them. Kaiser Fototechnik stands for a trademark that is a symbol of quality, reliability & performance. PRODUCT

Features: With 5 m (16 1/2 ft.) long release tube & winding reel; 15 cm (5.9 in.) long cable release with threaded rotating tip.

...