Modelled on traditional FB darkroom papers this 100% acid free matt paper with its white, ultra smooth surface, is ideal for both colour & monochrome prints. Part of the acclaimed Fotospeed ' Platinum' family of papers, approved by the Fine Art Trade Guild, when used with pigment inks will give an image life of 85 + years. Compatible with Dye & Pigment inks. ...

Modelled on traditional FB darkroom papers this 100% acid free matt paper with its white, ultra smooth surface, is ideal for both colour & monochrome prints. Part of the acclaimed Fotospeed' Platinum' family of papers, approved by the Fine Art Trade Guild, when used with pigment inks will give an image life of 85 + years. Compatible with Dye & Pigment inks. ...

Modelled on traditional FB darkroom papers this 100% acid free matt paper with its white, ultra smooth surface, is ideal for both colour & monochrome prints. Part of the acclaimed Fotospeed ' Platinum' family of papers, approved by the Fine Art Trade Guild, when used with pigment inks will give an image life of 85 + years. Compatible with Dye & Pigment inks. ...

Modelled on traditional FB darkroom papers this 100% acid free matt paper with its white, ultra smooth surface, is ideal for both colour & monochrome prints. Part of the acclaimed Fotospeed ' Platinum' family of papers, approved by the Fine Art Trade Guild, when used with pigment inks will give an image life of 85 + years. Compatible with Dye & Pigment inks. ...

Modelled on traditional FB darkroom papers this 100% acid free matt paper with its white, ultra smooth surface, is ideal for both colour & monochrome prints. Part of the acclaimed Fotospeed' Platinum' family of papers, approved by the Fine Art Trade Guild, when used with pigment inks will give an image life of 85 + years. Compatible with Dye & Pigment inks. ...

These CLEANING STRIPS are used to clean dust & fibers from DUST-AID Platinum silicone before the DUST-AID Platinum is used on a sensor filter. The CLEANING STRIPS are made with a specially formulated adhesive that will not transfer to DUST-AID Platinum. Purchasing additional CLEANING STRIPS will allow the user to lengthen the life span & use of DUST-AID Platinum. • Cleans dust from Platinum Silicone • 12 cleanings per package • Adhesive will not transfer to silicone • Safe & easy to use To use the cleaning strip all you need to do is remove one white tab to expose the cleaning adhesive, place the Platinum silicone flat onto the adhesive, remove the silicone from the adhesive & replace the white tab backwards onto the adhesive so you will know you used that section. NOTE: You might want to clean the sides of the silicone also. To do this first clean the base of the silicone with the cleaning strip & then the four exposed silicone side walls. ...

DUST-AID™ Platinum takes dry sensor cleaning to a whole new level. dust-Aid have taken dry sensor filter cleaning to a whole new level with the introduction of our new, patent pending, Platinum DSLR Cleaner. It's now possible to clean any sensor filter no matter its coating or internal dust removal system (IDRS) filter housing. & to top it off, it can clean its own platinum cured cleaning silicone with specially made cleaning strips, extending it's cleaning life span. The specially engineered cleaning silicone used in the new Platinum DSLR Cleaner makes it perfectly safe to use on any sensor filter. No more dragging dry brushes & their accumulated dust across the sensor filter, which could lead to scratching. Now, just press & lift a couple of times & your done! 1. Safely cleans uncoated sensor filters. We've tested the Platinum on uncoated sensor filters with no affect to the sensor filter. 2. Safely cleans ITO & Dichroic sensor filters. We've tested the Platinum on ITO, Dichroic & weak coated sensor filters with no affect to the sensor filter coatings. 3. Safely cleans I.D.R.S.* sensor filters. We've tested the Platinum on multiple IDRS sensor filters with no affect to the intenal dust removal system housing or sensor filter alignment. One of the biggest features with the new Platinum cleaner is its ability to have the cleaning silicone repeatedly cleaned free of accumulated dust & fibers. This means that you could have a lifetime of use out of the Platinum cleaner. The Platinum cleaner comes with 6 silicone cleaning applications & with the purchase of additional cleaning strips the life span of the Platinum could be extended indefinitely. The cleaning adhesive used to clean the Platinum silicone has been developed & tested not to transfer any of the adhesive to the silicone. The Platinum DSLR Cleaner is made from a specially manufactured platinum cured silicone that does not use any molds or mold release agents in its creation. This eliminates the chance of mold release agents permanently bonding & contaminating the silicone when it's molded. The use of this specially engineered silicone is patent pending. The Platinum silicone also has a patent pending micro texture on the cleaning surface which helps to stop the formation of a vacuum seal when it's applied to a cleaning surface. When the silicone is depressed on a surface the micro texture flattens out & adheres to any dust or fibers. Then, when the pressure is released the micro texture flex's back into place & allows air in, breaking the vacuum seal. This helps to reduce the adhesion strength & impact of the cleaning. We have eliminated every possible contamination to the cleaning silicone but there is a built in factor that no rubber or polyethylene cleaner has control over, internal oils. These blends of cohesive materials use oils that make them soft & allow them to pick up dust & fibers. We have designed our cleaning silicone not to transfer these oils to a surface when applied in a straight, up-down manor. If you where to drag the silicone on its side or twist the silicone it could leave residue. This residue can be easily removed with our DUST-WAND KIT™. But, if you follow the directions & lift the cleaner straight up & down then you will have no problem. Cleaning finger & camera oil from silicone: If you happen to get finger or camera oil on the Platinum silicone then it's very easy to remove. Simply clean the silicone with our DUST-CLOTH & ULTRA CLEAN liquid & then use the Cleaning Strips to remove any fibers. Test the Platinum silicone before use on a piece of clean glass, like a common UV HAZE filter, to see if you removed all of the oil. Repeat as needed. It's advised to test the Platinum silicone on a piece of clean glass before use due to possible accidental skin contact which can contaminate the cleaning surface of the silicone. ...

Product Information This is a Genuine Original replacement lamp for a SANYO PLC-SU50. The Lamps & Bulbs we sell for Data- & Video-Projectors & Rear-Projection TVs are of finest top quality & cover a wide range of Makes & Models ...

The Plus III Transceiver features an impressive 32 channels. Whether you’re a wedding or sports shooter or working in a busy studio, finding a clear channel is never a problem. Selective Quad-Zone Triggering, a feature once reserved for elite photographers, adds four zones enabling photographers to remotely trigger flash & or cameras in groups or individually. For photographers being asked to do more for less, this added flexibility is a huge competitive advantage. The Plus III is simple to operate. The soft-touch keypad is large & intuitive & a beautifully backlit LCD panel displays everything you need to know. All of this is presented in a sleek, side-view design which reduces the viewing obstruction while conveniently positioning all controls. The precision-tuned antenna is housed inside the case of the radio for better durability. The Plus III adds to the legendary Plus reliability with a working range that will meet photographer’s everyday needs. For more challenging environments or distances, there are two added features to improve range & reliability. Long Range Mode (LR) will roughly double the working range & is ideal for remote camera triggering. Repeater Mode (RP) allows the addition of one or more radios in between the transmitting & receiving radios to overcome distance, obstacles or other interference. RP mode works well for both remote camera triggering & remote flash triggering. Like the Plus II, the Plus III is an Auto-Sensing Transceiver which means it will automatically switch between transmit & receive as needed. This is very useful when syncing remote cameras to remote flash. When the receiving radio on a remote camera receives a trigger, it can automatically engage Auto-Relay Mode & send a trigger signal out on the next higher channel. This triggers remote flash completely in-sync with the remote camera. Remote camera users will love the new Two-Stage Trigger feature. The TEST button on the Plus III acts like a camera’s shutter release with “half-press”. Use this unique feature to wake, focus & meter a remote camera before triggering. Pressing TEST all the way triggers the remote camera. Also, with a Plus III on a h&-held camera connected with a Pocket Wizard ACC cable to the motor-drive port, that camera’s shutter release will also wake & prepare a remote camera for shooting. With remote camera triggering you can deliver two or more images for every push of the button & capture multiple angles all at the same time. Of course, the Plus III is reverse-compatible with all Pocket Wizard radios, making it the perfect addition to existing gear. It is especially well paired with the Multi MAX which has the same set of 32 channels & four zones. The Plus III can fire at sustained triggering rates of up to a blazing 14.5 frames per second. Two AA batteries can power the Plus III up to 50 hours & when needed for remote camera triggering, it can be powered with an external battery through the Mini-B USB (Universal Serial Bus) 2.0 port. The USB (Universal Serial Bus) port can also be used for firmware updates. Whether new to remote triggering of cameras & flashes or a top professional pushing gear to the limits, the Plus III’s reliability, simplicity & performance make it the perfect tool for the job. The Plus III is the new standard of excellence. ...

The Plus III Transceiver features an impressive 32 channels. Whether you’re a wedding or sports shooter or working in a busy studio, finding a clear channel is never a problem. Selective Quad-Zone Triggering, a feature once reserved for elite photographers, adds four zones enabling photographers to remotely trigger flash & or cameras in groups or individually. For photographers being asked to do more for less, this added flexibility is a huge competitive advantage. The Plus III is simple to operate. The soft-touch keypad is large & intuitive & a beautifully backlit LCD panel displays everything you need to know. All of this is presented in a sleek, side-view design which reduces the viewing obstruction while conveniently positioning all controls. The precision-tuned antenna is housed inside the case of the radio for better durability. The Plus III adds to the legendary Plus reliability with a working range that will meet photographer’s everyday needs. For more challenging environments or distances, there are two added features to improve range & reliability. Long Range Mode (LR) will roughly double the working range & is ideal for remote camera triggering. Repeater Mode (RP) allows the addition of one or more radios in between the transmitting & receiving radios to overcome distance, obstacles or other interference. RP mode works well for both remote camera triggering & remote flash triggering. Like the Plus II, the Plus III is an Auto-Sensing Transceiver which means it will automatically switch between transmit & receive as needed. This is very useful when syncing remote cameras to remote flash. When the receiving radio on a remote camera receives a trigger, it can automatically engage Auto-Relay Mode & send a trigger signal out on the next higher channel. This triggers remote flash completely in-sync with the remote camera. Remote camera users will love the new Two-Stage Trigger feature. The TEST button on the Plus III acts like a camera’s shutter release with “half-press”. Use this unique feature to wake, focus & meter a remote camera before triggering. Pressing TEST all the way triggers the remote camera. Also, with a Plus III on a h&-held camera connected with a Pocket Wizard ACC cable to the motor-drive port, that camera’s shutter release will also wake & prepare a remote camera for shooting. With remote camera triggering you can deliver two or more images for every push of the button & capture multiple angles all at the same time. Of course, the Plus III is reverse-compatible with all Pocket Wizard radios, making it the perfect addition to existing gear. It is especially well paired with the Multi MAX which has the same set of 32 channels & four zones. The Plus III can fire at sustained triggering rates of up to a blazing 14.5 frames per second. Two AA batteries can power the Plus III up to 50 hours & when needed for remote camera triggering, it can be powered with an external battery through the Mini-B USB (Universal Serial Bus) 2.0 port. The USB (Universal Serial Bus) port can also be used for firmware updates. Whether new to remote triggering of cameras & flashes or a top professional pushing gear to the limits, the Plus III’s reliability, simplicity & performance make it the perfect tool for the job. The Plus III is the new standard of excellence. ...