T11 Variable speed workshop router with built-in Quick Raiser fine adjuster & electronic full wave variable control of spindle speed under load for a fine finish on all types of material. The soft start eliminates sudden movement of machine on start up & the two column precision base with large phosphor bronze bushes provides plunging accuracy. Spindle lock & hex collet nut results in easy cutter changes with the 22 mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank.3-position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy. Router fine height adjuster for above & below height adjustment. One revolution of the handle equals 1.5 mm. Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit. Fittings for optional Clamp Guide System Kit. Extra large base aperture for large cutters. Quick release dust spout. Specifications ; Rating: Professional/ Trade. Plunge stroke: 0-80 mm. Power input: 2, 000w. Collet diameter: 1/2 inch. No load speeds: 8-20, 000/min. Dust spout

Size: 3.5cm. Guide bush dia. supplied: 30 mm. Cutter dia. max. plunge/table: 70/86 mm. Other collet dia. 6mm, 1/4in, 8mm, 3/8in, 10 mm & 12 mm. Weight 6.3 kg.

...

Trend T11EK 240V Variable Speed Router 1/2in T11 Variable speed workshop router with built-in Quick Raiser fine adjuster & electronic full wave variable control of spindle speed under load for a fine finish on all types of material. The soft start eliminates sudden movement of machine on start up & the two column precision base with large phosphor bronze bushes provides plunging accuracy. Spindle lock & hex collet nut results in easy cutter changes with the 22 mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank.3-position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy. Router fine height adjuster for above & below height adjustment. One revolution of the handle equals 1.5 mm. Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit. Fittings for optional Clamp Guide System Kit. Extra large base aperture for large cutters. Quick release dust spout. Specifications ; Rating: Professional/ Trade. Plunge stroke: 0-80 mm. Power input: 2, 000w. Collet diameter: 1/2 inch. No load speeds: 8-20, 000/min. Dust spout

Size: 3.5cm. Guide bush dia. supplied: 30 mm. Cutter dia. max. plunge/table: 70/86 mm. Other collet dia. 6mm, 1/4in, 8mm, 3/8in, 10 mm & 12 mm. Weight 6.3 kg.

...

T11 Variable speed workshop router with built-in Quick Raiser fine adjuster & electronic full wave variable control of spindle speed under load for a fine finish on all types of material. The soft start eliminates sudden movement of machine on start up & the two column precision base with large phosphor bronze bushes provides plunging accuracy. Spindle lock & hex collet nut results in easy cutter changes with the 22 mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank.3-position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy. Router fine height adjuster for above & below height adjustment. One revolution of the handle equals 1.5 mm. Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit. Fittings for optional Clamp Guide System Kit. Extra large base aperture for large cutters. Quick release dust spout. Specifications ; Rating: Professional/ Trade. Plunge stroke: 0-80 mm. Power input: 2, 000w. Collet diameter: 1/2 inch. No load speeds: 8-20, 000/min. Dust spout

Size: 3.5cm. Guide bush dia. supplied: 30 mm. Cutter dia. max. plunge/table: 70/86 mm. Other collet dia. 6mm, 1/4in, 8mm, 3/8in, 10 mm & 12 mm. Weight 6.3 kg.

...

Trend T11EKL 110V Variable Speed Router 1/2in T11 Variable speed workshop router with built-in Quick Raiser fine adjuster & electronic full wave variable control of spindle speed under load for a fine finish on all types of material. The soft start eliminates sudden movement of machine on start up & the two column precision base with large phosphor bronze bushes provides plunging accuracy. Spindle lock & hex collet nut results in easy cutter changes with the 22 mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank.3-position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy. Router fine height adjuster for above & below height adjustment. One revolution of the handle equals 1.5 mm. Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit. Fittings for optional Clamp Guide System Kit. Extra large base aperture for large cutters. Quick release dust spout. Specifications ; Rating: Professional/ Trade. Plunge stroke: 0-80 mm. Power input: 2, 000w. Collet diameter: 1/2 inch. No load speeds: 8-20, 000/min. Dust spout

Size: 3.5cm. Guide bush dia. supplied: 30 mm. Cutter dia. max. plunge/table: 70/86 mm. Other collet dia. 6mm, 1/4in, 8mm, 3/8in, 10 mm & 12 mm. Weight 6.3 kg.

...

Trend T420/35 x 8mm TCT Hinge Sinking 35mm Diameter Hinge Sinkers for drilling machines.TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. Diameter. 35mm. Hex Shank. 10mm. ...

Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter Specifically manufactured for the kitchen furniture trade for recessing circular hinges. Type 421 has two wings, no scribers & centre point while the T421 also has two wings no scribers & no centre point & is best suited for thinner laminate covered boards. These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This hinge sinker is best suited for thinner laminate covered boards. Use with pillar drills only. ...

Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter Specifically manufactured for the kitchen furniture trade for recessing circular hinges. Type 421 has two wings, no scribers & centre point while the T421 also has two wings no scribers & no centre point & is best suited for thinner laminate covered boards. These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This hinge sinker is best suited for thinner laminate covered boards. Use with pillar drills only. ...

Trend T46/0 x 1/4 TCT 90 Template Profiler 9.5 x 12.7mm Self guiding cutters with bearings mounted for trimming & bevelling timber, lippings & plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight & curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling
- use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2in Shank. Tooling Tungsten Carbide 1/4in Shank. Angle A = 90°D = 9.5 mm C = 12.7 mm
...

Self guiding cutters with bearings mounted for trimming & bevelling timber, lippings & plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight & curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling
- use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2in Shank. Tooling Tungsten Carbide 1/4in Shank. Angle A = 90°D = 9.5 mm C = 12.7 mm
...

Trend T46/01 x 1/2 TCT 90 Template Profiler 12.7 x 25mm Self guiding cutters with bearings mounted for trimming & bevelling timber, lippings & plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight & curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling
- use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2in Shank. Tooling Tungsten Carbide 1/2 in Shank. Angle A = 90°D = 12.7 mm C = 25 mm
...