About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Trend Stair/B
Staircase Jig
£174.33
Open Riser Staircase Jig B incorporates a stub riser to conform with building regulations. Hardwearing slid laminate, reversible fence, built-in heavy-duty front clamp. Kit
Includes::-1 x Adjustable reversible clamp.1 x Reversible clamp bar 1 x Sub-base 1 x 24mm Guide bush 1 x Line up pin 2 x Spanners 1 x Line up guide bush
...
Archived Product
image missing
Trend Stair/B
Staircase Jig
£171.05
Trend Stair/B Staircase Jig Open Riser Staircase Jig B incorporates a stub riser to conform with building regulations. Hardwearing slid laminate, reversible fence, built-in heavy-duty front clamp. Kit
Includes::-1 x Adjustable reversible clamp.1 x Reversible clamp bar 1 x Sub-base 1 x 24mm Guide bush 1 x Line up pin 2 x Spanners 1 x Line up guide bush
...
Archived Product
Trend T-Square
Trend T-Square
£38.92
This robust T-Square in Tufnol provides an instant means of squaring off, marking out, setting up jigs etc. Can be hung up when not in use. Length: 680mm. ...
Available
image missing
Trend T11EK 240V
Variable Speed Router
1/2in
£305.04
T11 Variable speed workshop router with built-in Quick Raiser fine adjuster & electronic full wave variable control of spindle speed under load for a fine finish on all types of material. The soft start eliminates sudden movement of machine on start up & the two column precision base with large phosphor bronze bushes provides plunging accuracy. Spindle lock & hex collet nut results in easy cutter changes with the 22 mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank.3-position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy. Router fine height adjuster for above & below height adjustment. One revolution of the handle equals 1.5 mm. Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit. Fittings for optional Clamp Guide System Kit. Extra large base aperture for large cutters. Quick release dust spout. Specifications ; Rating: Professional/ Trade. Plunge stroke: 0-80 mm. Power input: 2, 000w. Collet diameter: 1/2 inch. No load speeds: 8-20, 000/min. Dust spout

Size: 3.5cm. Guide bush dia. supplied: 30 mm. Cutter dia. max. plunge/table: 70/86 mm. Other collet dia. 6mm, 1/4in, 8mm, 3/8in, 10 mm & 12 mm. Weight 6.3 kg.

...
Archived Product
image missing
Trend T11EK 240V
Variable Speed Router
1/2in
£376.54
Trend T11EK 240V Variable Speed Router 1/2in T11 Variable speed workshop router with built-in Quick Raiser fine adjuster & electronic full wave variable control of spindle speed under load for a fine finish on all types of material. The soft start eliminates sudden movement of machine on start up & the two column precision base with large phosphor bronze bushes provides plunging accuracy. Spindle lock & hex collet nut results in easy cutter changes with the 22 mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank.3-position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy. Router fine height adjuster for above & below height adjustment. One revolution of the handle equals 1.5 mm. Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit. Fittings for optional Clamp Guide System Kit. Extra large base aperture for large cutters. Quick release dust spout. Specifications ; Rating: Professional/ Trade. Plunge stroke: 0-80 mm. Power input: 2, 000w. Collet diameter: 1/2 inch. No load speeds: 8-20, 000/min. Dust spout

Size: 3.5cm. Guide bush dia. supplied: 30 mm. Cutter dia. max. plunge/table: 70/86 mm. Other collet dia. 6mm, 1/4in, 8mm, 3/8in, 10 mm & 12 mm. Weight 6.3 kg.

...
Available
image missing
Trend T11EKL 110V
Variable Speed Router
1/2in
£376.54
Trend T11EKL 110V Variable Speed Router 1/2in T11 Variable speed workshop router with built-in Quick Raiser fine adjuster & electronic full wave variable control of spindle speed under load for a fine finish on all types of material. The soft start eliminates sudden movement of machine on start up & the two column precision base with large phosphor bronze bushes provides plunging accuracy. Spindle lock & hex collet nut results in easy cutter changes with the 22 mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank.3-position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy. Router fine height adjuster for above & below height adjustment. One revolution of the handle equals 1.5 mm. Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit. Fittings for optional Clamp Guide System Kit. Extra large base aperture for large cutters. Quick release dust spout. Specifications ; Rating: Professional/ Trade. Plunge stroke: 0-80 mm. Power input: 2, 000w. Collet diameter: 1/2 inch. No load speeds: 8-20, 000/min. Dust spout

Size: 3.5cm. Guide bush dia. supplied: 30 mm. Cutter dia. max. plunge/table: 70/86 mm. Other collet dia. 6mm, 1/4in, 8mm, 3/8in, 10 mm & 12 mm. Weight 6.3 kg.

...
Available
image missing
Trend T420/35 X 8mm
TCT Hinge Sinking 35mm
Diameter
£10.98
Trend T420/35 x 8mm TCT Hinge Sinking 35mm Diameter Hinge Sinkers for drilling machines.TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. Diameter. 35mm. Hex Shank. 10mm. ...
Available
image missing
Trend T421/35 X 1/4
TCT Hinge Sinking Bit
35mm Diameter
£21.53
Specifically manufactured for the kitchen furniture trade for recessing circular hinges. Type 421 has two wings, no scribers & centre point while the T421 also has two wings no scribers & no centre point & is best suited for thinner laminate covered boards. These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This hinge sinker is best suited for thinner laminate covered boards. Use with pillar drills only. ...
Archived Product
image missing
Trend T421/35 X 1/4
TCT Hinge Sinking Bit
35mm Diameter
£23.18
Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter Specifically manufactured for the kitchen furniture trade for recessing circular hinges. Type 421 has two wings, no scribers & centre point while the T421 also has two wings no scribers & no centre point & is best suited for thinner laminate covered boards. These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This hinge sinker is best suited for thinner laminate covered boards. Use with pillar drills only. ...
Available
image missing
Trend T421/35 X 1/4
TCT Hinge Sinking Bit
35mm Diameter
£20.57
Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter Specifically manufactured for the kitchen furniture trade for recessing circular hinges. Type 421 has two wings, no scribers & centre point while the T421 also has two wings no scribers & no centre point & is best suited for thinner laminate covered boards. These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This hinge sinker is best suited for thinner laminate covered boards. Use with pillar drills only. ...
Archived Product

Trend T11EKL 110V Variable Speed Router 1/2in

T11 Variable speed workshop router with built-in Quick Raiser fine adjuster and electronic full wave variable control of spindle speed under load for a fine finish on all types of material. The soft start eliminates sudden movement of machine on start up and the two column precision base with large phosphor bronze bushes provides plunging accuracy.Spindle lock and hex collet nut results in easy cutter changes with the 22 mm spanner supplied.Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work.Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank.3-position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy.Router fine height adjuster for above and below height adjustment.
One revolution of the handle equals 1.5 mm.Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit.Fittings for optional Clamp Guide System Kit.Extra large base aperture for large cutters. Quick release dust spout.Specifications ;Rating: Professional/Trade.Plunge stroke: 0-80 mm.Power input: 2, 000w.Collet diameter: 1/2 inch.No load speeds: 8-20, 000/min.Dust spout size: 35 mm.Guide bush dia. supplied: 30 mm.Cutter dia. max. plunge/table: 70/86 mm.Other collet dia. 6mm, 1/4in, 8mm, 3/8in, 10 mm & 12 mm.Weight 6.3 kg.
RIP - This product is no longer available on our network. It was last seen on 13.03.2014

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£305.04
Home > Power Tools > Planers, Biscuit Joiners & Routers > Routers
Description Reviews / Comments Add New

Product Description

T11 Variable speed workshop router with built-in Quick Raiser fine adjuster & electronic full wave variable control of spindle speed under load for a fine finish on all types of material. The soft start eliminates sudden movement of machine on start up & the two column precision base with large phosphor bronze bushes provides plunging accuracy. Spindle lock & hex collet nut results in easy cutter changes with the 22 mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank.3-position revolving depth stop for fast adjustable settings. Adjustable inner plate for guide bush accuracy. Router fine height adjuster for above & below height adjustment. One revolution of the handle equals 1.5 mm. Three quick release recesses in base to fit tables in conjunction with optional Quick Release Kit. Fittings for optional Clamp Guide System Kit. Extra large base aperture for large cutters. Quick release dust spout. Specifications ; Rating: Professional/ Trade. Plunge stroke: 0-80 mm. Power input: 2, 000w. Collet diameter: 1/2 inch. No load speeds: 8-20, 000/min. Dust spout

Size: 3.5cm. Guide bush dia. supplied: 30 mm. Cutter dia. max. plunge/table: 70/86 mm. Other collet dia. 6mm, 1/4in, 8mm, 3/8in, 10 mm & 12 mm. Weight 6.3 kg.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
Inch - Equivalent to approximately 2.5cm
soft - A descriptive word for an item/sound which is gentle to the touch or ears
Dust - A general term used for micro particles in the atmosphere
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
speed - A measurement of how fast an object travels between two points
professional - A term used to describe products or people which may be focused on specialist educational training
edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
edge - The point at which two surfaces meet
Size - is the measurement of how big an object is in space.
Weight - a measurement of how heavy an object appears due to the pull of gravity. For example the weight of an object on planet earth will be different to the weight of the object on the moon
Quick - Something that is fast
Large - something that takes up more space than normal.
Parallel - Two objects that run symmetrically alongside each other.
Adjustable - Something that can be changed or slightly modified to fit.
Professional - A person that is trained within a profession.
Twin - A pair of people or animals that are born at the same time.
Adjustable - Something that can be changed in order to fit better.

Supplier Information

Building Supplies Online
Building Supplies Online Ltd. is a renowned store and is a veteran of sorts in the trade of building supplies across UK. The company has served the public and industry experts with quality products for many years. With over 1,000,000 visitors to its credit till date, the firm offers the widest choice of construction supplies of about 30,000 products at very competitive prices. In addition to a comprehensive array of building supplies, BSO also offers garden tools, home and car care utilities that are a must have in all homes. Landscaping, fencing and gates, insulation and security devices, patio slabs, garden furniture, topsoil and turf, waste management and geo-textile products are a few of the other options that are put on offer. Half-price offers and gift vouchers are also available at Building Supplies Online Ltd. Branded tools and appliances from all favourite brands in the UK are available at BSO.
Page Updated: 2022-09-24 03:29:12

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu