D-Links 1-channel MPEG4 Video Encoder turns any existing Closed Circuit Television (CCTV) camera into a fully functional IP-based surveillance system. The DVS-210-1 is an ideal choice for banks, airports, factories, government buildings, prisons, & traffic monitoring applications
- any location where CCTV equipment is already installed & functioning. The hardware encoder supports MPEG-4 / MJPEG video with frame rates of up to 25 fps at D1 resolution. D-Links intuitive D-View Cam management software provides a robust platform for configuring & controlling one or many IP cameras & video encoders. Intuitive controls allow you to manage & control live video with ease. Motion alarms with configurable detection areas allow for effective surveillance & avoid constant human supervision. A buffer system allows the device to capture images on to an SD card both before & after an event occurs.
...

D-Link is an industry pioneer, market leader, designer & true manufacturer of networking communications & digital home electronic products. Excellence in manufacturing, innovation & a commitment to quality has allowed D-Link to produce cutting-edge, high-performance products within standard-based technologies. The company continues to offer the best value in the connectivity market today by combining high-quality products with the most affordable price point. ...

D-Link is an industry pioneer, market leader, designer & true manufacturer of networking communications & digital home electronic products. Excellence in manufacturing, innovation & a commitment to quality has allowed D-Link to produce cutting-edge, high-performance products within standard-based technologies. The company continues to offer the best value in the connectivity market today by combining high-quality products with the most affordable price point. ...

Designed to support distances up to 300 meters, the DEM-421XT is a high performance 850nm Multi-Mode XFP transceiver. Supporting Full-duplex, 10 Gigabit speeds on Multi-Mode fiber cables, the DEM-421XT is 802.3ae 10GBASE-SR compliant & supports Full-duplex 802.3x Flow control. The DEM-421XT provides the necessary signal amplification for data to be transmitted to the network cable from the port, & vice versa. The DEM-421XT is hot swappable. You can remove or replace the transceiver with the system powered on. This permits transceivers to be added or swapped without interrupting network systems. ...

Designed to support distances up to 300 meters, the DEM-421XT is a high performance 850nm Multi-Mode XFP transceiver. Supporting Full-duplex, 10 Gigabit speeds on Multi-Mode fiber cables, the DEM-421XT is 802.3ae 10GBASE-SR compliant & supports Full-duplex 802.3x Flow control. The DEM-421XT provides the necessary signal amplification for data to be transmitted to the network cable from the port, & vice versa. The DEM-421XT is hot swappable. You can remove or replace the transceiver with the system powered on. This permits transceivers to be added or swapped without interrupting network systems. ...

The DPE-301GS Po E splitter is used with end devices such as wireless access points, IP cameras & Vo IP phones that don't natively support Po E, but rather require DC power input. It receives Po E power on a network cable from a Po E switch or midspan injector, & splits the Ethernet & DC power into two separate cables. One cable provides the DC power, & the other cable provides the Ethernet signal. The DPE-301GS Po E splitter has two 10 / 100 / 1000 RJ-45 ports. One port is for Po E input, which is the network connection & is usually connected to a remote Po E switch or injector. The other port is for LAN output, which is the connection that provides the Ethernet signal to the end device. ...

The DPE-101GI Power Over Ethernet (Po E) Injector is designed to supply a power & data connection to Po E devices such as an IP Camera or Wireless Access Point. The DPE-101GI gives you the ability to mount your Po E device virtually anywhere in a building, such as on ceilings or near entryways, by eliminating the need for a nearby power outlet & attached power supply. D-Link’s DPE-101GI combines electrical power with a Gigabit network connection & produces a Gigabit Power over Ethernet (Po E) signal, allowing a single Ethernet cable to carry both data & power to a device. Cost Efficient Flexibility Deploying the DPE-101GI saves both installation costs & equipment costs, allowing a single RJ-45 Ethernet cable to carry both power & data to each device. This reduces cables, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable place, & most of all, reduces installation time. The Power over Ethernet solution frees IP surveillance cameras & wireless AP deployments from the restrictions of power outlet locations. High Speed Connectivity The DPE-101GI Power Over Ethernet (Po E) Injector is designed to be deployed in situations where high bandwidth is demanded. Examples where the DPE-101GI is ideal include powering network devices such as wall mounted PTZ (Pan, Tilt & Zoom) network cameras, ceiling mounted PTZ dome network cameras, video & voice over IP (Vo IP) telephones, & multichannel (11a/b/g/n) wireless LAN access points. ...

This transceiver uses the industry-standard Small form Pluggable (SFP) package. It slides into the mini-GBIC slot of the Gigabit device. Like all D-Link mini-GBIC transceivers, it is hot-swappable: you can remove or replace the transceiver with the system powered on, which allows modules to be added or swapped without interrupting the network. ...

This transceiver uses the industry-standard Small form Pluggable (SFP) package. It slides into the mini-GBIC slot of the Gigabit device. Like all D-Link mini-GBIC transceivers, it is hot-swappable: you can remove or replace the transceiver with the system powered on, which allows modules to be added or swapped without interrupting the network. ...

This transceiver uses the industry-standard Small form Pluggable (SFP) package. It slides into the mini-GBIC slot of the Gigabit device. Like all D-Link mini-GBIC transceivers, it is hot-swappable: you can remove or replace the transceiver with the system powered on, which allows modules to be added or swapped without interrupting the network. ...