More From Contributor

£86.96
Vision CS-1600 ceiling mounted speakers are passive 8-ohm low impedance speakers vision CS-1600 dont sacrifice frequency range in the way that the transformer on 100/70 V speakers inherently do, meaning lower bass extension & higher treble without distortion. Powerful & robust 30 W power handling from the vision CS-1600 translates into loud sound with no distortion & with a frequency response of 80 Hz -20 k Hz response the 2-way design offers full-bandwidth delivery with control & clarity. enhanced crossover design on the vision CS-1600 provides superb off-axis dispersion characteristics. Ceiling speakers inherently lack power at the bottom end, so Vision CS-1600 have been tuned to have a slightly louder sensitivity of 89 d B to punch through high-noise environments. The 6.5" woofer of the CS-1600 is a 6.5" polypropylene cone with a 3/4" Ferro-fluid cooled silk tweeter set in a swivel mount for fine tuning of the stereoscopic image. The Vision CS-1600 speaker is designed for unobtrusive sound dispersion whilst mounted flush into false ceilings & ceiling tiles or deep custom made plaster board cavity walls, a perfect alternative for situations where wall speakers are not appropriate. ...
Available
£86.96
Vision CS-1600 ceiling mounted speakers are passive 8-ohm low impedance speakers vision CS-1600 don't sacrifice frequency range in the way that the transformer on 100/70 V speakers inherently do, meaning lower bass extension & higher treble without distortion. Powerful & robust 30 W power handling from the vision CS-1600 translates into loud sound with no distortion & with a frequency response of 80 Hz -20 k Hz response the 2-way design offers full-bandwidth delivery with control & clarity. enhanced crossover design on the vision CS-1600 provides superb off-axis dispersion characteristics. Ceiling speakers inherently lack power at the bottom end, so Vision CS-1600 have been tuned to have a slightly louder sensitivity of 89 d B to punch through high-noise environments. The 6.5" woofer of the CS-1600 is a 6.5" polypropylene cone with a 3/4" Ferro-fluid cooled silk tweeter set in a swivel mount for fine tuning of the stereoscopic image. The Vision CS-1600 speaker is designed for unobtrusive sound dispersion whilst mounted flush into false ceilings & ceiling tiles or deep custom made plaster board cavity walls, a perfect alternative for situations where wall speakers are not appropriate. ...
Available
£86.96
Vision CS-1600 ceiling mounted speakers are passive 8-ohm low impedance speakers vision CS-1600 don't sacrifice frequency range in the way that the transformer on 100/70 V speakers inherently do, meaning lower bass extension & higher treble without distortion. Powerful & robust 30 W power handling from the vision CS-1600 translates into loud sound with no distortion & with a frequency response of 80 Hz -20 k Hz response the 2-way design offers full-bandwidth delivery with control & clarity. enhanced crossover design on the vision CS-1600 provides superb off-axis dispersion characteristics. Ceiling speakers inherently lack power at the bottom end, so Vision CS-1600 have been tuned to have a slightly louder sensitivity of 89 d B to punch through high-noise environments. The 6.5" woofer of the CS-1600 is a 6.5" polypropylene cone with a 3/4" Ferro-fluid cooled silk tweeter set in a swivel mount for fine tuning of the stereoscopic image. The Vision CS-1600 speaker is designed for unobtrusive sound dispersion whilst mounted flush into false ceilings & ceiling tiles or deep custom made plaster board cavity walls, a perfect alternative for situations where wall speakers are not appropriate. ...
Available
£198.67
Part of Visions " Techconnect Twist" product family, the TC2-HDMIIP converts HDMI signal into TCP/IP packets for transmission over a 100/10 megabit Ethernet network. With no visible loss of video or audio quality it is perfect for corporate & digital signage applications. ...
Archived Product
£198.67
Part of Vision's " Techconnect Twist" product family, the TC2-HDMIIP converts HDMI signal into TCP/IP packets for transmission over a 100/10 megabit Ethernet network. With no visible loss of video or audio quality it is perfect for corporate & digital signage applications. ...
Archived Product
£8.32
By using the low-impedance digital amplifier chip technology the Techconnect Amp module outputs a massive 2 x 20 w RMS (at 8 ohms) but fits into the space of a Techconnect module. By default when power is activated the Techconnect Amp turns on & resumes the most recent settings. For hospitality applications it can be set to return to a preset input & level whenever it is powered on
- for example in hotel guest rooms. A clear display makes the product easy to use & a simple soft-control interface gives instant access to controls. Because the control panel can be installed anywhere in the room it is more convenient than traditional powered speakers where access to the controls can be awkward.
...
Archived Product
£168.00
The CS-1600 ceiling speakers feature a two-way design which gives full-bandwidth sound full of bass & clarity. The main driver is a 6.5? polypropylene cone complimented by a 1? ferro-fluid cooled silk tweeter. These low impedance speakers do no sacrifice frequency range, & with the rear cabinet allowing full tuning of internal acoustics the bass is rich & deep without distortion. ...
Archived Product
£200.00
Vision AV-1700 is a 4-channel digital stereo mixer amplifier bundle with Vision CS-1600 discrete flush ceiling tile mount speakers. The AV-1700 amplifier is compact, flexible, easy to use & uses no power at idle. Rated at 2 x 30 W RMS per channel at 8 ohms impedance. The Vision 30 W stereo AV-1700 power amplifier with 4 x stereo inputs/1 x stereo pre-output/1 x balanced microphone input with phantom power. ...
Archived Product
£200.00
Vision AV-1700 is a 4-channel digital stereo mixer amplifier bundle with Vision CS-1600 discrete flush ceiling tile mount speakers. The AV-1700 amplifier is compact, flexible, easy to use & uses no power at idle. Rated at 2 x 30 W RMS per channel at 8 ohms impedance. The Vision 30 W stereo AV-1700 power amplifier with 4 x stereo inputs/1 x stereo pre-output/1 x balanced microphone input with phantom power. ...
Archived Product
£235.87
Using an Intels Celeron processor the VMP-CE is a rugged workhorse designed to be used 24/7 as a digital signage media player
-
...
Available

Vision Infrared Remote Control TC2-AMP3/AV-1700 /SP-1200P

By using the low-impedance digital amplifier chip technology the Techconnect Amp module outputs a massive 2 x 20 w RMS (at 8 ohms) but fits into the space of a Techconnect module. By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on - for example in hotel guest rooms. A clear display makes the product easy to use and a simple soft-control interface gives instant access to controls. Because the control panel can be installed anywhere in the room it is more convenient than traditional powered speakers where access to the controls can be awkward.
RIP - This product is no longer available on our network. It was last seen on 15.04.2022

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£8.29

Product Description

By using the low-impedance digital amplifier chip technology the Techconnect Amp module outputs a massive 2 x 20 w RMS (at 8 ohms) but fits into the space of a Techconnect module. By default when power is activated the Techconnect Amp turns on & resumes the most recent settings. For hospitality applications it can be set to return to a preset input & level whenever it is powered on
- for example in hotel guest rooms. A clear display makes the product easy to use & a simple soft-control interface gives instant access to controls. Because the control panel can be installed anywhere in the room it is more convenient than traditional powered speakers where access to the controls can be awkward.

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Hotel - An establishment which provides lodging for a fee
Digital - A system that uses only 0s and 1s to transmit data
soft - A descriptive word for an item/sound which is gentle to the touch or ears
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Traditional - Something that has become the same through a period of time and thus repeated.
Traditional - Something that has been around for a while and is repeated regularly.
Simple - Basic, easy no difficulty in understanding.
Awkward - Something that becomes difficult and can get in the way.
Vision - To be able to imagine, also can mean what you can see.
Convenient - Something that suits and fits well to other activities.

Supplier Information

Page Updated: 2022-10-13 15:56:15

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu