The Techaudio AV-1700 is compact, flexible, & easy to use & is extremely efficient. Use as a standalone mixer & amp or as a mixer which outputs to a bigger amp or powered loudspeakers. Visions SP-1600 loudspeakers are easier to install than any other speaker in its class, with superb sound quality & a robust chassis. They are powerful, professional, & acoustically optimized for the Vision range of amplifiers. ...

The two-way design offers a full-bandwidth delivery full of control & clarity. The main driver is a 6.5" polypropylene cone, complimented by a ferro-fluid cooled silk tweeter set in a swivel mount for fine tuning of the stereoscopic image. These low impedance speakers dont sacrifice frequency range in the way that the transformer on 100/70v speakers inherently do, meaning lower bass extension & higher treble without distortion. These speakers are a perfect alternative for situations where wall speakers are not appropriate. ...

Vision CS-1600 ceiling mounted speakers are passive 8-ohm low impedance speakers vision CS-1600 dont sacrifice frequency range in the way that the transformer on 100/70 V speakers inherently do, meaning lower bass extension & higher treble without distortion. Powerful & robust 30 W power handling from the vision CS-1600 translates into loud sound with no distortion & with a frequency response of 80 Hz -20 k Hz response the 2-way design offers full-bandwidth delivery with control & clarity. enhanced crossover design on the vision CS-1600 provides superb off-axis dispersion characteristics. Ceiling speakers inherently lack power at the bottom end, so Vision CS-1600 have been tuned to have a slightly louder sensitivity of 89 d B to punch through high-noise environments. The 6.5" woofer of the CS-1600 is a 6.5" polypropylene cone with a 3/4" Ferro-fluid cooled silk tweeter set in a swivel mount for fine tuning of the stereoscopic image. The Vision CS-1600 speaker is designed for unobtrusive sound dispersion whilst mounted flush into false ceilings & ceiling tiles or deep custom made plaster board cavity walls, a perfect alternative for situations where wall speakers are not appropriate. ...

Vision CS-1600 ceiling mounted speakers are passive 8-ohm low impedance speakers vision CS-1600 don't sacrifice frequency range in the way that the transformer on 100/70 V speakers inherently do, meaning lower bass extension & higher treble without distortion. Powerful & robust 30 W power handling from the vision CS-1600 translates into loud sound with no distortion & with a frequency response of 80 Hz -20 k Hz response the 2-way design offers full-bandwidth delivery with control & clarity. enhanced crossover design on the vision CS-1600 provides superb off-axis dispersion characteristics. Ceiling speakers inherently lack power at the bottom end, so Vision CS-1600 have been tuned to have a slightly louder sensitivity of 89 d B to punch through high-noise environments. The 6.5" woofer of the CS-1600 is a 6.5" polypropylene cone with a 3/4" Ferro-fluid cooled silk tweeter set in a swivel mount for fine tuning of the stereoscopic image. The Vision CS-1600 speaker is designed for unobtrusive sound dispersion whilst mounted flush into false ceilings & ceiling tiles or deep custom made plaster board cavity walls, a perfect alternative for situations where wall speakers are not appropriate. ...

Vision CS-1600 ceiling mounted speakers are passive 8-ohm low impedance speakers vision CS-1600 don't sacrifice frequency range in the way that the transformer on 100/70 V speakers inherently do, meaning lower bass extension & higher treble without distortion. Powerful & robust 30 W power handling from the vision CS-1600 translates into loud sound with no distortion & with a frequency response of 80 Hz -20 k Hz response the 2-way design offers full-bandwidth delivery with control & clarity. enhanced crossover design on the vision CS-1600 provides superb off-axis dispersion characteristics. Ceiling speakers inherently lack power at the bottom end, so Vision CS-1600 have been tuned to have a slightly louder sensitivity of 89 d B to punch through high-noise environments. The 6.5" woofer of the CS-1600 is a 6.5" polypropylene cone with a 3/4" Ferro-fluid cooled silk tweeter set in a swivel mount for fine tuning of the stereoscopic image. The Vision CS-1600 speaker is designed for unobtrusive sound dispersion whilst mounted flush into false ceilings & ceiling tiles or deep custom made plaster board cavity walls, a perfect alternative for situations where wall speakers are not appropriate. ...

Part of Vision's " Techconnect Twist" product family, the TC2-HDMIIP converts HDMI signal into TCP/IP packets for transmission over a 100/10 megabit Ethernet network. With no visible loss of video or audio quality it is perfect for corporate & digital signage applications. ...

By using the low-impedance digital amplifier chip technology the Techconnect Amp module outputs a massive 2 x 20 w RMS (at 8 ohms) but fits into the space of a Techconnect module. By default when power is activated the Techconnect Amp turns on & resumes the most recent settings. For hospitality applications it can be set to return to a preset input & level whenever it is powered on
- for example in hotel guest rooms. A clear display makes the product easy to use & a simple soft-control interface gives instant access to controls. Because the control panel can be installed anywhere in the room it is more convenient than traditional powered speakers where access to the controls can be awkward.
...

By using the low-impedance digital amplifier chip technology the Techconnect Amp module outputs a massive 2 x 20 w RMS (at 8 ohms) but fits into the space of a Techconnect module. By default when power is activated the Techconnect Amp turns on & resumes the most recent settings. For hospitality applications it can be set to return to a preset input & level whenever it is powered on
- for example in hotel guest rooms. A clear display makes the product easy to use & a simple soft-control interface gives instant access to controls. Because the control panel can be installed anywhere in the room it is more convenient than traditional powered speakers where access to the controls can be awkward.
...

The CS-1600 ceiling speakers feature a two-way design which gives full-bandwidth sound full of bass & clarity. The main driver is a 6.5? polypropylene cone complimented by a 1? ferro-fluid cooled silk tweeter. These low impedance speakers do no sacrifice frequency range, & with the rear cabinet allowing full tuning of internal acoustics the bass is rich & deep without distortion. ...

Vision AV-1700 is a 4-channel digital stereo mixer amplifier bundle with Vision CS-1600 discrete flush ceiling tile mount speakers. The AV-1700 amplifier is compact, flexible, easy to use & uses no power at idle. Rated at 2 x 30 W RMS per channel at 8 ohms impedance. The Vision 30 W stereo AV-1700 power amplifier with 4 x stereo inputs/1 x stereo pre-output/1 x balanced microphone input with phantom power. ...