Make a right-angled connection to your SATA drive, for installation in tight spaces. The SATA8RA1 Right Angle (90-degree) SATA Cable features a standard (straight) SATA receptacle as well as a right-angled SATA receptacle, providing a simple 8-inch connection to a Serial ATA drive, with full SATA 3.0 bandwidth support of up to 6 Gbps when used with SATA 3.0 compliant drives. The right-angled SATA connection enables you to plug in your Serial ATA hard drive in hard to reach areas or tight spaces, while the low profile & flexible design of the cable improves airflow & reduces clutter in your computer case, helping to keep the case clean & cool. As an alternative, Star Tech.com also offers an 8in Left Angle SATA cable (SATA8LA1), which provides the same simple installation as this right angled SATA cable, but allows the cable to connect to the SATA drive from the opposite direction. ...

This DMS 59 to dual DVI Y cable means that you can break out one LFH 59 or LFH 60 (DMS 59 & DMS 60) connection on Matrox Qid, n Vidia Quadro, & PNY Quadro graphics cards into two DVI-I Dual Link female connectors
- letting you connect two DVI capable monitors for a cost-effective dual display solution.
...

This DMS 59 to DVI & VGA Y cable means that you can break out one LFH 59 or LFH 60 (DMS 59 & DMS 60) connection on Matrox Qid, n Vidia Quadro, & PNY Quadro cards into one DVI-I dual link female connector & one high density DB15 female connector, letting you to connect one VGA monitor & one DVI monitor for a cost-effective dual display solution. ...

This DMS 59 to dual VGA Y cable means that you can break out one LFH 59 or LFH 60 (DMS 59 & DMS 60) connection on Matrox Qid, n Vidia Quadro, & PNY Quadro graphics cards into two high density DB15 female connectors, letting you connect two VGA monitors for a cost-effective dual display solution. ...

This 8 Port transmitter unit is designed for use with Star Tech.coms ST121 VGA Video over Cat 5 extension series. This convenient video distribution system simplifies implementing digital signage solutions by allowing a single VGA source to be broadcast to multiple displays at up to 492 ft. (150m) away. Comprised of an 8 port VGA extender unit (this device
- ST1218T) or a 4 port VGA extender unit (ST1214T) & one ST121R Receiver Unit per display as necessary, the VGA & Audio extension series can transmit a single VGA output & corresponding audio to four or eight displays/receivers over standard Cat 5 UTP cable. For even more versatility, the VGA over Cat 5 Repeater (ST121EXT) can be used to increase the total VGA extension distance by an additional 492 ft., allowing the VGA signal to be broadcast at a total distance of 984 ft. from transmitter to receiver. Similarly, up to three repeater units can be used between the transmitter & receiver units allowing monitors to be connected between the two units, while still extending the total distance between the transmitter & receiver units.
...

Wall-mount your server or networking equipment sideways, for easy access. The RK819SIDEM Side-mounted Wallmount Open Frame Rack/ Cabinet is an 8U server rack that lets you mount your (19-inch wide) servers, A/V or network equipment facing perpendicular to the wall, for easy access to mounted devices & equipment. The cabinet/rack features open access to both the front & back of your devices, making it easy to adjust cabling, view LEDs & access configuration buttons as needed. Plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks, without causing an obstruction. Constructed of high-quality SPCC cold-rolled steel, for strength & durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...

Wall-mount your server or networking equipment sideways, for easy access. The RK819SIDEM Side-mounted Wallmount Open Frame Rack/ Cabinet is an 8U server rack that lets you mount your (19-inch wide) servers, A/V or network equipment facing perpendicular to the wall, for easy access to mounted devices & equipment. The cabinet/rack features open access to both the front & back of your devices, making it easy to adjust cabling, view LEDs & access configuration buttons as needed. Plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks, without causing an obstruction. Constructed of high-quality SPCC cold-rolled steel, for strength & durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...

Mount your server & networking equipment to the wall, with side mounting for hassle-free access to rear cabling. The RK819SIDEM Side-mounted Wallmount Open Frame Rack/ Cabinet is an 8U server rack that lets you mount your (19-inch wide) servers, A/V or network equipment facing perpendicular to the wall, for easy access to mounted devices & equipment. The cabinet/rack features open access to both the front & back of your devices, making it easy to adjust cabling, view LEDs & access configuration buttons as needed. Plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks, without causing an obstruction. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. Constructed of high-quality SPCC cold-rolled steel, for strength & durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...

Wall-mount your server or networking equipment with a hinged rack design for easy access & maintenance. The RK819WALLOH 8U 22in Depth Hinged Open Frame Wall Mount Server Rack lets you wall mount your (19-inch wide) servers, A/V or network equipment & features a hinged rack design that allows the entire frame to swing open for easy installation & maintenance of your equipment. The 8U wallmount rack offers a 4 post design for additional support of your equipment, storing a maximum weight capacity of 63kg (140 lbs). Constructed of high-quality SPCC cold-rolled steel for strength & durability, the open frame wallmount server rack allows for maximum airflow, & ships complete with all of the rack screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...

Wall-mount your server or networking equipment with a hinged rack design for easy access & maintenance. The RK819WALLOH 8U 22in Depth Hinged Open Frame Wall Mount Server Rack lets you wall mount your (19-inch wide) servers, A/V or network equipment & features a hinged rack design that allows the entire frame to swing open for easy installation & maintenance of your equipment. The 8U wallmount rack offers a 4 post design for additional support of your equipment, storing a maximum weight capacity of 63kg (140 lbs). Constructed of high-quality SPCC cold-rolled steel for strength & durability, the open frame wallmount server rack allows for maximum airflow, & ships complete with all of the rack screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...