Add 2 native Fire Wire 400 ports to your computer through a PCI Express expansion slot. This Fire Wire 400 adapter card can be installed in any PCI Express slot in order to add 2 IEEE 1394a ports, making it an ideal selection for connecting a broad range of Fire Wire 400 compatible devices such as external storage, DV camcorders, HD video cameras, personal multimedia devices & more. The Fire Wire adapter card is designed based on a native PCI Express (PCIe) single chipset that harnesses the full capability of PCI Express, allowing for greater performance, reliability & cost-effectiveness. Plus, the adapter card

Includes:: an optional low profile/half-height bracket that makes it easy to add 2 Fire Wire 400 ports to any computer, regardless of the computer case form factor.

...

Add 2 native Fire Wire 400 ports to your computer through a PCI Express expansion slot. This Fire Wire 400 adapter card can be installed in any PCI Express slot in order to add 2 IEEE 1394a ports, making it an ideal selection for connecting a broad range of Fire Wire 400 compatible devices such as external storage, DV camcorders, HD video cameras, personal multimedia devices & more. The Fire Wire adapter card is designed based on a native PCI Express (PCIe) single chipset that harnesses the full capability of PCI Express, allowing for greater performance, reliability & cost-effectiveness. Plus, the adapter card

Includes:: an optional low profile/half-height bracket that makes it easy to add 2 Fire Wire 400 ports to any computer, regardless of the computer case form factor.

...

This Fire Wire 400 card connects to a computer PCI Express (PCIe) slot to provide two Fire Wire 6-pin Female ports
- making it
...

Add 2 native Fire Wire 400 ports to your desktop through a PCI Express slot. The PEX1394A2V 2-Port PCI Express Fire Wire Card lets you add two native Fire Wire 400 ports to your desktop PC, allowing you to connect IEEE 1394A Fire Wire devices such as digital cameras, external hard drives, DV camcorders, & more. When two devices are simultaneously connected, this PCIe Fire Wire adapter reduces performance bottlenecks by offering support for data transfer rates up to 400 Mbps to each port. The Fire Wire card employs dual-bus architecture to provide the maximum bandwidth to each individually connected device, rather than sharing the bandwidth across multiple ports. An ideal solution for transferring large volumes of data at once, the Fire Wire card also integrates a native PCIe single chipset design. With no secondary bridge chipset, your Fire Wire devices communicate quicker with your PC to ensure seamless operation of your connected peripherals. For broad compatibility, the Fire Wire card is natively supported in Windows with no additional drivers required, is equipped with a standard profile bracket, &

Includes:: a low-profile/half-height bracket for installation in small form-factor computers.

...

Add two high speed, ESD-Protected RS232 ports, with 5V or 12V selectable power output through a PCI Express slot. The PEX2S553S 2-Port PCI Express Serial Card lets you add two ESD-Protected RS232 ports with 5V or 12V selectable power output, through a PCI Express slot. Ideal for industrial environments, this 2-port serial card offers built-in 15KV ESD-protection which helps prevent damage to connected devices in the event of line surges & electro-static discharge. An extended operating temperature range (-30°C to 75°C) also helps to ensure performance in harsh environments. For devices that require additional power, this serial controller has a jumper-selectable 5V or 12V power output option (pin 1 and/or pin 9), through an LP4 connection to your power supply. For added flexibility, the power output can be enabled or disabled on a per-port basis so you choose which port (s) supply power. This versatile RS232 card supports high-speed serial data rates up to 921.6 Kbps, & is compliant with PCIe Gen 2.0 specifications for added bandwidth. To maximize installation options, the 2-port card is equipped with a standard profile bracket &

Includes:: an optional low-profile/half-height bracket for installation in small form factor computers.

...

Add 2 RS232 serial ports with 5V or 12V selectable power output to your computer through a PCI Express slot. The PEX2S952PW 2-Port PCI Express Serial Card (with Power Output) turns a PCI Express slot into 2 RS232 (DB9) serial connections & enables compatible devices to draw power from the serial ports. Suitable for many RS232-powered serial applications, this PCIe serial card offers a selectable 5V or 12V power option capable of power output using pin 1, 4, 8 or 9, allowing you to configure the card to suit the requirements of your powered RS232 devices. A flexible solution for adding serial ports to small form factor or full-sized systems, the 2-port serial card

Includes:: both low & full profile brackets & features a 4-layer PCB (with separate layers for data & ground) to greatly reduce signal noise & loss. To ensure maximum performance, the serial card is based on a native single chip design, that means that you can harness the full capability of PCI Express (PCIe)
- providing optimum reliability & speed while reducing the load applied to the CPU by as much as 48% over conventional (bridge chip) serial cards.


...

Add 2 Super Speed USB (Universal Serial Bus) 3.0 ports to your PCI Express-enabled PC. The PEXUSB3S25 2-Port PCI Express USB (Universal Serial Bus) 3.0 Card lets you add two USB (Universal Serial Bus) 3.0 ports to your PCI Express-enabled computer system, with an optional LP4 power connector to connect to your system power supply & deliver up to 900m A of power per port to USB (Universal Serial Bus) 3.0 bus-powered devices (500m A for USB (Universal Serial Bus) 2.0). Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP supported enclosure (Note: UASP is not supported by all operating systems). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. The PCIe USB (Universal Serial Bus) 3.0 adapter is compliant with USB (Universal Serial Bus) 3.0 standards for data transfer speeds up to 5 Gbps, while still offering backward compatibility with existing USB (Universal Serial Bus) 2.0 / 1.1 devices. For added versatility, the controller card is equipped with a standard profile bracket &

Includes:: a low-profile/half-height bracket for installation in small form-factor computers. UASP is supported in Windows 8, Server 2012 & Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. Test results were obtained using an Intel Ivy Bridge system, Star Tech.com add-on USB (Universal Serial Bus) 3.0 cards, a UASP-enabled Star Tech.com enclosure, & a SATA III solid state drive.

...

Add 2 USB (Universal Serial Bus) 3.0 ports to your desktop computer through a PCI Express expansion slot. The PEXUSB3S2 PCI Express USB (Universal Serial Bus) 3.0 card lets you add two USB (Universal Serial Bus) 3.0 ports to your PC through a PCI Express slot. Featuring a native NEC PCI Express host controller chipset, the USB (Universal Serial Bus) 3.0 standard supports transfer rates of up to 5 Gbps, while still providing backward compatibility for older USB (Universal Serial Bus) 2.0 (480 Mbps) & 1.1 (12 Mbps) devices. Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. In addition to providing a much faster transfer rate the PEXUSB3S2 USB (Universal Serial Bus) 3.0 card also supplies 900m A of power per USB (Universal Serial Bus) port, allowing more & more external devices to operate without the need of an additional power source. UASP is supported in Windows 8, Server 2012 & Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. Test results were obtained using an Intel Ivy Bridge system, Star Tech.com add-on USB (Universal Serial Bus) 3.0 cards, a UASP-enabled Star Tech.com enclosure, & a SATA III solid state drive. ...

Add 2 USB (Universal Serial Bus) 3.0 ports to your desktop computer through a PCI Express expansion slot. The PEXUSB3S2 PCI Express USB (Universal Serial Bus) 3.0 card lets you add two USB (Universal Serial Bus) 3.0 ports to your PC through a PCI Express slot. Featuring a native NEC PCI Express host controller chipset, the USB (Universal Serial Bus) 3.0 standard supports transfer rates of up to 5 Gbps, while still providing backward compatibility for older USB (Universal Serial Bus) 2.0 (480 Mbps) & 1.1 (12 Mbps) devices. Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. In addition to providing a much faster transfer rate the PEXUSB3S2 USB (Universal Serial Bus) 3.0 card also supplies 900m A of power per USB (Universal Serial Bus) port, allowing more & more external devices to operate without the need of an additional power source. UASP is supported in Windows 8, Server 2012 & Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources. Test results were obtained using an Intel Ivy Bridge system, Star Tech.com add-on USB (Universal Serial Bus) 3.0 cards, a UASP-enabled Star Tech.com enclosure, & a SATA III solid state drive. ...

This PCI-based Powered USB (Universal Serial Bus) Card adds two 12V & one 24V Powered USB (Universal Serial Bus) ports to any computer, through an available PCI Slot. Drawing power from either the PCI slot or the computer power supply, the Powered USB (Universal Serial Bus) adapter card provides up to 3A of current to each connected device, allowing for up to three Powered USB (Universal Serial Bus) devices to be installed at a time. Plus, this Adapter Card can be connected to Star Tech.coms 2 Port 12V/24V Powered USB (Universal Serial Bus) Adapter Card (PUSBADAP), to create two additional Powered USB (Universal Serial Bus) ports, without using an extra PCI slot. A Full-height bracket is attached to the adapter, & a low profile bracket is included in the packaging box for small form factor systems. ...