The ST128UTPEA is the 8 Port Extender Transmitter unit utilized by Star Tech.com UTPEA VGA & Audio over Cat 5 extension series. This convenient video distribution system simplifies implementing digital signage solutions by allowing a single VGA source & corresponding audio to be broadcast to multiple displays at up to 300m (950ft) away. Comprised of a 4 port VGA & Audio extender unit (ST124UTPEA) or this 8 port VGA & Audio extender unit & one STUTPEALR Receiver Unit or STUTPRXWLA wall-plate receiver (see accessories) per display as necessary, the VGA & Audio extension series can transmit a single VGA output & corresponding audio to four or eight displays/receivers over standard Cat 5 UTP cable. For even more versatility, the VGA & Audio over Cat 5 Line Splitter (STUTPEA4X) can be used to multiply the number of potential displays by four
- allowing the VGA signal & accompanying audio to be broadcast to up to 16 or 32 VGA displays.
...

Star Tech.com's DS Series Cat 5 Digital Signage Broadcaster with RS232 Serial & Audio offers a comprehensive audio & video extension system, with the added benefit of serial control! Compatible with virtually any VGA-capable PC or digital signage media player, the DS128 VGA splitter lets you deliver VGA video as well as the accompanying audio & serial control signals to the connected Cat 5 VGA receivers (DSRXL
- purchased separately), all through one Cat 5 cable. Comprised of this unit (DS128) & the corresponding receivers, the DS Series offers several unique features compared to the other VGA extenders, including the ability to extend RS-232 serial signals from the source to each display for controlling the displays as well as Java Client Management Software (DSNet Manager) that simplifies adjusting the settings for each receiver & display. The software can be controlled via an Ethernet port on a PC/media player or on a LAN (Local Area Network). Ensuring not only a simple & cost-effective way to extend & control VGA video & the corresponding audio, the DS series (DS128 & DSRXL) also maintains exceptional, high quality video, up to 1600x 1200 over a 100m connection. For further extension, you can daisy chain up to five receivers, for a maximum distance of 300m.
...

Star Tech.com's DS Series Cat 5 Digital Signage Broadcaster with RS232 Serial & Audio offers a comprehensive audio & video extension system, with the added benefit of serial control! Compatible with virtually any VGA-capable PC or digital signage media player, the DS128 VGA splitter lets you deliver VGA video as well as the accompanying audio & serial control signals to the connected Cat 5 VGA receivers (DSRXL
- purchased separately), all through one Cat 5 cable. Comprised of this unit (DS128) & the corresponding receivers, the DS Series offers several unique features compared to the other VGA extenders, including the ability to extend RS-232 serial signals from the source to each display for controlling the displays as well as Java Client Management Software (DSNet Manager) that simplifies adjusting the settings for each receiver & display. The software can be controlled via an Ethernet port on a PC/media player or on a LAN (Local Area Network). Ensuring not only a simple & cost-effective way to extend & control VGA video & the corresponding audio, the DS series (DS128 & DSRXL) also maintains exceptional, high quality video, up to 1600x 1200 over a 100m connection. For further extension, you can daisy chain up to five receivers, for a maximum distance of 300m.
...

This 8 Port transmitter unit is designed for use with Star Tech.com's ST121 VGA Video over Cat 5 extension series. This convenient video distribution system simplifies implementing digital signage solutions by allowing a single VGA source to be broadcast to multiple displays at up to 492 ft. (150m) away. Comprised of an 8 port VGA extender unit (this device
- ST1218T) or a 4 port VGA extender unit (ST1214T) & one ST121R Receiver Unit per display as necessary, the VGA & Audio extension series can transmit a single VGA output & corresponding audio to four or eight displays/receivers over standard Cat 5 UTP cable. For even more versatility, the VGA over Cat 5 Repeater (ST121EXT) can be used to increase the total VGA extension distance by an additional 492 ft., allowing the VGA signal to be broadcast at a total distance of 984 ft. from transmitter to receiver. Similarly, up to three repeater units can be used between the transmitter & receiver units allowing monitors to be connected between the two units, while still extending the total distance between the transmitter & receiver units.
...

This 8 Port transmitter unit is designed for use with Star Tech.com's ST121 VGA Video over Cat 5 extension series. This convenient video distribution system simplifies implementing digital signage solutions by allowing a single VGA source to be broadcast to multiple displays at up to 492 ft. (150m) away. Comprised of an 8 port VGA extender unit (this device
- ST1218T) or a 4 port VGA extender unit (ST1214T) & one ST121R Receiver Unit per display as necessary, the VGA & Audio extension series can transmit a single VGA output & corresponding audio to four or eight displays/receivers over standard Cat 5 UTP cable. For even more versatility, the VGA over Cat 5 Repeater (ST121EXT) can be used to increase the total VGA extension distance by an additional 492 ft., allowing the VGA signal to be broadcast at a total distance of 984 ft. from transmitter to receiver. Similarly, up to three repeater units can be used between the transmitter & receiver units allowing monitors to be connected between the two units, while still extending the total distance between the transmitter & receiver units.
...

Extend & distribute your VGA video signal to up to eight remote displays using Cat 5 cabling. The ST128UTPE 8 Port VGA Video Extender over Cat 5 (UTPE Series) allows up to 9 (1 local & 8 remote) monitors to be connected to a single VGA source. The video signal is carried to the remote monitors over standard 4 pair Category 5 & Category 6 UTP cable using RJ45 connectors & supports distances of up to 300m / 950ft. At each remote monitor an STUTPRXL receiver is required. The receiver unit converts the signal from the UTP cable back into VGA video for the monitor. ...

Extend & distribute your VGA video signal to up to eight remote displays using Cat 5 cabling. The ST128UTPE 8 Port VGA Video Extender over Cat 5 (UTPE Series) allows up to 9 (1 local & 8 remote) monitors to be connected to a single VGA source. The video signal is carried to the remote monitors over standard 4 pair Category 5 & Category 6 UTP cable using RJ45 connectors & supports distances of up to 300m / 950ft. At each remote monitor an STUTPRXL receiver is required. The receiver unit converts the signal from the UTP cable back into VGA video for the monitor. ...

Star Tech.coms Wall Mountable VGA Video Splitter lets you distribute & deliver VGA video from a single video source to up to eight monitors simultaneously
- a perfect solution for digital signage applications, retail & tradeshow environments, educational & government facilities, or corporate displays where high quality video is required. The wall mountable VGA video splitter is very simple to install, letting you locate screens up to 200ft (61m) away from the VGA video source & supports resolutions up to 1600 x 1200.
...

The ST128LGB 8 port VGA video splitter allows a single VGA source to display VGA video onto eight monitors simultaneously. Perfect for classrooms, tradeshows, or in-store displays where high quality video on several monitors is needed. The simple plug & play operation makes setup quick & easy so you can be up & running in minutes. The ST128LGB supports displays with up to 250 MHz of bandwidth, providing brilliant resolutions up to 1920x 1440. A built-in booster circuit lets you situate your displays up to 210 ft away from your source. ...

Connect up to 8 different Gb E (4 Po E+) devices, using this IP30 industrial Ethernet switch with intelligent Layer 2 management. Easily deploy or scale your network with this Gigabit Ethernet switch, by adding eight copper Gigabit Ethernet connections, including four Po E+ ports. This IP30 industrial network switch provides intelligent Layer 2 management. Its rugged, compact design & wall-mount option with front access make it ideal for demanding applications, even where space is limited. This Gigabit Ethernet switch lets you expand your network by connecting up to eight RJ45 devices (four Po E+). The 8-Port switch enables up to eight users to share files & devices, such as printers & scanners, over a LAN connection, by enhancing your existing network capacity with additional ports. The switch gives you the freedom to place your equipment in locations where power outlets are not available, with support for Power over Ethernet Plus. The network switch provides abundant Po E power, with up to 30 watts for each Po E port (120W budget). With its compact design, you can wall-mount the Gigabit switch to provide convenient front access to ports & indicators. It's ideal for a wide range of applications, including tight installation areas with significant electromagnetic interference, such as control cabinets & panels. The network switch is also DIN-rail mountable. The switch delivers efficient & stable performance, with Layer 2 management capabilities. This lets you control packet traffic on a busy network, & customize your settings to achieve optimal network performance, offering enhanced efficiency & reliability. This rugged network switch features an IP30-rated metal housing & extended temperature range of -40°C to 75°C, which makes it absolutely ideal for a wide range of operating conditions. The sturdy metal enclosure offers durability, even in harsh industrial environments. With support for 10/100/1000 Mbps transfer speeds, this managed switch suppo ...