More From Contributor

The STUTPEALRGB is the receiver unit utilized by the STUTPEAGB VGA & audio over Cat 5 extension series. This convenient video distribution system simplifies implementing digital signage solutions by allowing a single VGA source & corresponding audio to be broadcast to multiple displays at up to 300m (950ft) away. Comprised of one receiver unit per display, as well as a 4 port VGA & audio extender unit (ST124UTPEAGB) or an 8 port VGA & audio extender unit (ST128UTPEAGB), the VGA & audio extension series can transmit a single VGA output & corresponding audio to 4 or 8 displays/receivers over standard Cat 5 UTP cable. For even more versatility, the VGA & audio over Cat 5 Line Splitter (STUTPEA4XGB) can be used to multiply the number of potential displays by four
- allowing the VGA signal & accompanying audio to be broadcast to up to 16 or 32 VGA displays.
...

Available

Extend & distribute a VGA signal & the accompanying audio to a remote display over Cat 5 cable. The ST122UTPAGB VGA Video Extender over Cat 5 with Audio allows up to 4 (2 local & 2 remote) monitors to be connected to a single PC. The video signal & corresponding audio are sent to the remote unit over standard 4 pair Category 5 or better (Cat 5e recommended) UTP cable, supporting extended video distances of up to 150m / 500ft. The VGA video & audio extender

Includes:: a local transmitter & a remote receiver, providing an out-of-the box solution that's perfect for point to point digital signage applications that require audio. To simplify installation, this kit also

Includes:: a mounting bracket for the ST122UTGB receiver to install onto walls, desks or cabinets for a tidy setup.

...

Available

Extend & distribute a VGA signal & the accompanying audio to a remote display over Cat 5 cable. The ST122UTPAGB VGA Video Extender over Cat 5 with Audio allows up to 4 (2 local & 2 remote) monitors to be connected to a single PC. The video signal & corresponding audio are sent to the remote unit over standard 4 pair Category 5 or better (Cat 5e recommended) UTP cable, supporting extended video distances of up to 150m / 500ft. The VGA video & audio extender

Includes:: a local transmitter & a remote receiver, providing an out-of-the box solution thats perfect for point to point digital signage applications that require audio. To simplify installation, this kit also

Includes:: a mounting bracket for the ST122UTGB receiver to install onto walls, desks or cabinets for a tidy setup.

...

Available

Extend a VGA signal to a remote display using Cat 5 cabling. The ST121UTPEP VGA Video Extender over Cat 5
- Point to Point lets
...

Archived Product

The ST121UTPGB VGA video extender over Cat 5 means that you can extend your VGA video signal by up to 130 meters (430 feet) & connect up to 4 displays (2 local & 2 remote) from that single source. The ST121UTPGB is a bundled kit including both a local transmitter & a remote receiver unit, offering a complete solution for scenarios in which remote monitor displays are required. The local unit features a single VGA input as well as two VGA outputs giving you the ability to view & split your source VGA signal to two independent displays locally. The VGA video signal is then sent over standard 4 pair category 5 or better UTP cable to the remote unit which also features two additional VGA outputs giving you the freedom to display your VGA source on up to four monitors in total. ...

Available

The ST121RGB VGA over Cat 5 video extender receiver is specifically designed for use as the receiver unit to the Star Tech.com ST1214TGB 4 port VGA over Cat 5 UTP Extender transmitter, allowing you to split & extend a single VGA source to up to four remote displays. From the transmitter device, the VGA video signal is sent over standard 4 pair category 5 or better UTP cable to remote monitors, each connected to an ST121RGB Cat 5 VGA receiver
- supporting distances of up to 150 meters (500 feet). A cost-effective video extension solution, this receiver is ideal for a wide range of environments including airports, bus depots, retail, or any large buildings where VGA video needs to be extended to long connection distances.
...

Available

This VGA over Cat 5 extender/repeater is specially designed for use with Star Tech.coms ST121 VGA Video over Cat 5 extender series, which is typically comprised of a transmitter unit (ST1214TGB or ST1218TGB) & a Receiver unit (ST121RGB). The VGA extender repeater adds to the extension distance capability, for a total of 300m (984 ft.) between the transmitter unit & receiver unit. For even more versatility, up to three repeater units can be used between the transmitter & receiver units, allowing monitors to be connected between the two units. ...

Available

The ST122LGB 2 port VGA video splitter allows a single VGA source to display VGA video onto two monitors simultaneously. Perfect for classrooms, tradeshows, or in-store displays where high quality video on several monitors is needed. The simple plug & play operation makes setup quick & easy so you can be up & running in minutes. The ST122LGB supports displays with up to 250 MHz of bandwidth, providing brilliant resolutions up to 1920x 1440. A built-in booster circuit lets you situate your displays up to 210 ft away from your source. ...

Archived Product

The ST124LGB 4 port VGA video splitter allows a single VGA source to display VGA video onto four monitors simultaneously. Perfect for classrooms, tradeshows, or in-store displays where high quality video on several monitors is needed. The simple plug & play operation makes setup quick & easy so you can be up & running in minutes. The ST124LGB supports up to 250 MHz of video bandwidth, providing brilliant resolutions up to 1920x 1440. A built-in booster circuit lets you situate your displays up to 210 ft away from your source. ...

Archived Product

StarTech.com VGA Video Extender Over Cat5 / UTP

The ST121UTPGB VGA video extender over Cat5 allows you to extend your VGA video signal by up to 130 meters (430 feet) and connect up to 4 displays (2 local and 2 remote) from that single source. The ST121UTPGB is a bundled kit including both a local transmitter and a remote receiver unit, offering a complete solution for scenarios in which remote monitor displays are required. The local unit features a single VGA input as well as two VGA outputs giving you the ability to view and split your source VGA signal to two independent displays locally. The VGA video signal is then sent over standard 4 pair category 5 or better UTP cable to the remote unit which also features two additional VGA outputs giving you the freedom to display your VGA source on up to four monitors in total.