Make a right side-angled connection to your SATA drive, for installation in narrow spaces. The SATA18RSA1 Right Side-Angled SATA Cable (18-inch) features one straight & one right side-angled (7-pin) data receptacle, which positions the cable so that it runs parallel to the drive ports
- ideal for connectivity in narrow spaces, enabling installation of the drive as needed within the system case. The cable also features a flexible low profile design that helps improve airflow & reduce clutter in your computer case, which helps keep the case clean & cool. Constructed of only finest top quality materials & designed for optimum performance & reliability this 18" SATA cable supports full SATA 3.0 bandwidth (up to 6 Gbps) when used with SATA 3.0 compliant drives.
...

Increase the airflow in your system with the Star Tech.com FDROUNDBL, an 18-inch rounded connection cable for 3.5" floppy disk drives. Compared to bulky ribbon cables, the compact round design of the FDROUNDBL makes it easier to route through the case & allows more airflow through your case, helping to keep your system cool. Surrounded by a brightly colored JVC jacket that makes them sturdier & less susceptible to damage, these cables are the perfect replacement for bulky ribbon cables or for installation in a new system. ...

This 18in "upward" right angle SATA cable features an upward right-angled (90°) combination SATA data & power connector, that breaks out into one LP4 power (male) connector & one SATA data connector
- allowing you to connect a Serial ATA drive to a power supply that may not offer a SATA power connector, as well as to the motherboard SATA controller. The data segment of the cable uses the 7-pin SATA architecture to keep the cable ultra-thin, narrow & flexible, giving you more room & better airflow inside your case. The keyed contacts of the Serial ATA connector prevent broken or bent pins & allow a firmly seated connection with minimal pressure. The right angled Serial ATA Data Cable is designed & constructed to provide a dependable & convenient SATA connection.
...

This 18in "upward" right angle SATA cable features an upward right-angled (90°) combination SATA data & power connector, that breaks out into one LP4 power (male) connector & one SATA data connector
- allowing you to connect a Serial ATA drive to a power supply that may not offer a SATA power connector, as well as to the motherboard SATA controller. The data segment of the cable uses the 7-pin SATA architecture to keep the cable ultra-thin, narrow & flexible, giving you more room & better airflow inside your case. The keyed contacts of the Serial ATA connector prevent broken or bent pins & allow a firmly seated connection with minimal pressure. The right angled Serial ATA Data Cable is designed & constructed to provide a dependable & convenient SATA connection.
...

The RACK-18U-20-WALL-OA 18U Open Frame Wall Mount Equipment Rack with Adjustable Depth is a high-quality, sturdy relay rack solution that is easy to assemble & install into any environment. ...

Securely store servers, network & telecommunications equipment in this 18U server or network cabinet. This server rack provides 18U of storage space in a sleek, secure cabinet for storing standard 19" rack-mount devices such as Dell, HP, & IBM servers, along with telecommunication & A/V equipment. The rack is compatible with EIA-310 compliant equipment & supports a total load capacity of 450kg (992 lb.). This rack

Includes:: a variety of features that enable you to easily incorporate plenty of equipment. With adjustable mounting rails, you can easily change the rail depth from 3" up to 30.7" (76.2 mm
- 780 mm) to ensure compatibility your standard rack-mount equipment. The added depth also provides support for additional cable & power management behind your equipment. For hassle-free cable management, the rack

Includes:: a 3 meter roll of hook-&-loop cable tie that makes it easy to keep your cables neat & tidy by binding them together or binding them to the rack. The self-gripping fabric can be cut to any size, enabling a wrap-around solution for the cables of any rack-mount equipment. The rack features holes with covers on the ceiling & floor panels that make it easy to run cabling to the inside & outside of the cabinet, for discreet cable management. The rack also features grounding lugs that enable you to ground your equipment for added protection. This rack also

Includes:: a 1U shelf that gives you a stable surface for placing equipment that's not rack-mountable or storing your tools. To provide hassle-free deployment the rack ships fully assembled. To keep your rack-mounted equipment secure, this rack features front & rear locking mesh doors. The mesh doors look great in any server room & help provide passive cooling. The doors are also reversible, which gives you the freedom to choose which side of the rack the door opens from, to suit your server room's spatial requirements. The rack also has removable side panels with independ






...

This 18U server rack cabinet provides plenty of storage space in a sleek secure cabinet for storing EIA-310 compliant 19 inch rackmount devices such as Dell, HP & IBM servers along with telecommunication, A/V & IT equipment. ...

Use this wall-mount network cabinet to mount your server or networking equipment to the wall, with a hinged enclosure for easy access. This 18U server or network rack cabinet lets you mount your EIA-310 compliant equipment to the wall, in a secure enclosure that has a hinged rear door for easy access to your equipment. The enclosure features adjustable mounting depth from 2.4 to 20 in. to provide a robust storage solution for your rack-mount equipment. To provide secure stability for your heaviest equipment, this rack offers 4-post mounting, supporting a higher weight capacity per U than 2-post racks & supporting a total load capacity of up to 200 lb. (90 kg). Save valuable floor space by wall-mounting the enclosure. The wall-mounted design makes this enclosure the ideal solution for optimizing equipment storage in your classroom, retail store, server room or office. This rack also

Includes:: a 1U shelf that gives you a stable surface for placing equipment that's not rack-mountable or storing your tools. The wall-mount network rack makes it easy to access your equipment & cabling, with a rear hinge that swings the enclosure away from the wall. By flipping the enclosure 180 degrees upon installation, you can reverse the direction of the hinge so that the enclosure can swing open from left or the right, depending on your preference. The 18U network cabinet features a removable & reversible front door & removable side panels, each with quick-release mechanisms, so you can easily access your equipment. Plus, each door & panel on this rack features an independent lock, ensuring your equipment is secure. For hassle-free cable management, the rack

Includes:: a 3 meter roll of hook-&-loop cable tie that makes it easy to keep your cables neat & tidy by binding them together or binding them to the rack. The self-gripping fabric can be cut to any size, enabling a wrap-around solution for the cables of any rack-mount equipment. This server rack enclo



...

Organize & manage network, server & KVM cabling in your server rack. The CABLMANAGER2 1U Cable Management Panel mounts to a standard 19" 2 or 4-post rack to help you organize network, server or KVM cabling, using D-Ring hooks. Constructed of high-quality steel, the cable organizer panel offers 5 removable ABS plastic D-Ring hooks, spaced 4in (105mm) apart for routing cables through your server rack & reducing cable strain. As an added benefit, the hook on either end of the panel can be turned 90° to accommodate horizontal or vertical rack cabling as needed. Adding a cable manager in between equipment also functions to close off open spaces in the rack, promoting proper airflow. ...

The monitor privacy screen is easy to attach & remove. Simply attach the 19 inch privacy screen to your 16:10 aspect ratio display using the attachment strips or slide-mount tabs. This confidentiality screen filter is also reversible. The matte side provides you with glare reduction & the glossy side of the privacy screen will provide you with increased clarity. ...