Power your Internal SATA hard drive from an LP4 / Molex connector on your Power Supply. The SATA18POW SATA Data & Power Cable features a combination 22-pin SATA receptacle data & power connector as well as an Molex (LP4) power connector & SATA receptacle data connector, allowing you to create a conventional Serial ATA data connection to a computer while powering the drive through an LP4 connection to the computer power supply. This high quality SATA power/LP4 adapter cable measures 18in, providing the flexibility required to position the SATA hard drive as needed within the computer case, while eliminating the expense of upgrading the computer power supply for the sake of SATA compatibility. ...

Make a left-angled connection to your SATA drive, for installation in tight spaces. The SATA18LA1 Left Angle (90-degree) SATA Cable features a standard (straight) SATA receptacle as well as a left-angled SATA receptacle, providing a simple 18-inch connection to a Serial ATA drive, with full SATA 3.0 bandwidth support of up to 6 Gbps when used with SATA 3.0 compliant drives. The left-angled SATA connection enables you to plug in your Serial ATA hard drive in hard to reach areas or tight spaces, while the low profile & flexible design of the cable improves airflow & reduces clutter in your computer case, helping to keep the case clean & cool. As an alternative, Star Tech.com also offers an 18in Right Angle SATA cable (SATA18RA1), which provides the same simple installation as this left angled SATA cable, but allows the cable to connect to the SATA drive from the opposite direction. ...

Make a left-angled connection to your SATA drive, for installation in tight spaces. The SATA18LA1 Left Angle (90-degree) SATA Cable features a standard (straight) SATA receptacle as well as a left-angled SATA receptacle, providing a simple 18-inch connection to a Serial ATA drive, with full SATA 3.0 bandwidth support of up to 6 Gbps when used with SATA 3.0 compliant drives. The left-angled SATA connection enables you to plug in your Serial ATA hard drive in hard to reach areas or tight spaces, while the low profile & flexible design of the cable improves airflow & reduces clutter in your computer case, helping to keep the case clean & cool. As an alternative, Star Tech.com also offers an 18in Right Angle SATA cable (SATA18RA1), which provides the same simple installation as this left angled SATA cable, but allows the cable to connect to the SATA drive from the opposite direction. ...

Make a left side-angled connection to your SATA drive, for installation in narrow spaces. The SATA18LSA1 Left Side-Angled SATA Cable (18-inch) features one straight & one left side-angled (7-pin) data receptacle, which positions the cable so that it runs parallel to the drive ports
- ideal for connectivity in narrow spaces, enabling installation of the drive as needed within the system case. The cable also features a flexible low profile design that helps improve airflow & reduce clutter in your computer case, which helps keep the case clean & cool. Constructed of only finest top quality materials & designed for optimum performance & reliability this 18" SATA cable supports full SATA 3.0 bandwidth (up to 6 Gbps) when used with SATA 3.0 compliant drives.
...

Make a left side-angled connection to your SATA drive, for installation in narrow spaces. The SATA18LSA1 Left Side-Angled SATA Cable (18-inch) features one straight & one left side-angled (7-pin) data receptacle, which positions the cable so that it runs parallel to the drive ports
- ideal for connectivity in narrow spaces, enabling installation of the drive as needed within the system case. The cable also features a flexible low profile design that helps improve airflow & reduce clutter in your computer case, which helps keep the case clean & cool. Constructed of only finest top quality materials & designed for optimum performance & reliability this 18" SATA cable supports full SATA 3.0 bandwidth (up to 6 Gbps) when used with SATA 3.0 compliant drives.
...

Increase the airflow in your system with the Star Tech.com FDROUNDBL, an 18-inch rounded connection cable for 3.5" floppy disk drives. Compared to bulky ribbon cables, the compact round design of the FDROUNDBL makes it easier to route through the case & allows more airflow through your case, helping to keep your system cool. Surrounded by a brightly colored JVC jacket that makes them sturdier & less susceptible to damage, these cables are the perfect replacement for bulky ribbon cables or for installation in a new system. ...

This 18in "upward" right angle SATA cable features an upward right-angled (90°) combination SATA data & power connector, that breaks out into one LP4 power (male) connector & one SATA data connector
- allowing you to connect a Serial ATA drive to a power supply that may not offer a SATA power connector, as well as to the motherboard SATA controller. The data segment of the cable uses the 7-pin SATA architecture to keep the cable ultra-thin, narrow & flexible, giving you more room & better airflow inside your case. The keyed contacts of the Serial ATA connector prevent broken or bent pins & allow a firmly seated connection with minimal pressure. The right angled Serial ATA Data Cable is designed & constructed to provide a dependable & convenient SATA connection.
...

This 18in "upward" right angle SATA cable features an upward right-angled (90°) combination SATA data & power connector, that breaks out into one LP4 power (male) connector & one SATA data connector
- allowing you to connect a Serial ATA drive to a power supply that may not offer a SATA power connector, as well as to the motherboard SATA controller. The data segment of the cable uses the 7-pin SATA architecture to keep the cable ultra-thin, narrow & flexible, giving you more room & better airflow inside your case. The keyed contacts of the Serial ATA connector prevent broken or bent pins & allow a firmly seated connection with minimal pressure. The right angled Serial ATA Data Cable is designed & constructed to provide a dependable & convenient SATA connection.
...

The RACK-18U-20-WALL-OA 18U Open Frame Wall Mount Equipment Rack with Adjustable Depth is a high-quality, sturdy relay rack solution that is easy to assemble & install into any environment. ...

Computer Equipment Rack Casters Leveling Feet Cable Management Hooks. The 18U open frame rack lets you store your servers, network & telecommunications equipment in a sturdy, adjustable depth open-frame rack. Easy to Assemble Designed with ease of use in mind, this 18U 4 post rack offers easy-to-read markings for both rack units (U) & depth, with a wide range of mounting depth adjustments (22
- 40 in.) that make it easy to adapt the adjustable server rack to fit your equipment. Durable  Design This durable free standing server rack supports a static loading capacity of up to 1200 lb.  (544 kg) & portable rolling weight capacity of 660 lb.  (300 kg). The rack also features offers compliance with the EIA/ECA-310 standard for a universal design that's compatible with most network equipment rack equipment. For a complete server storage solution that saves you time & hassle, the mobile server rack 
Includes: optional accessories such as casters, leveling feet & cable management hooks. The base is also pre-drilled for securely fastening the rack to the floor if needed, providing you with additional stability while free standing. The Choice of IT Pros Since 1985 Star Tech.com conducts thorough compatibility & performance testing on all our products to ensure we are meeting or exceeding industry standards & providing high-quality products to IT Professionals. Our local Star Tech.com Technical Advisors have broad product expertise & work directly with our Star Tech.com Engineers to provide support for our customers both pre and post-sales. Backed by a Star Tech.com 2-year warranty & free lifetime technical support.

...