Value RAM is Kingstons value-priced line of industry-standard, generic memory intended for customers who have white box or ...

**4GB (2GB 256M x 64-Bit x 2 pcs.) DDR3-1600 M Hz CL9 240-Pin DIMM Kit** Kingstons KHX1600C9D3B1K2/4GX is a kit of two 256M x 64-bit 2GB (2048MB) DDR3-1600 M Hz CL9 SDRAM (Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel XMP (Extreme Memory Profiles). Total kit capacity is 4GB. Each module kit has been tested to run at DDR3-1600 M Hz at a low latency timing of 9-9-9-27 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333 M Hz timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers & requires +1.5V. The JEDEC standard electrical & mechanical specifications are as follows: ** Features**
- JEDEC standard 1.5V ± 0.075V Power Supply
- VDDQ = 1.5V ± 0.075V
- 667 M Hz f CK for 1333 Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 5, 6, 7, 8, 9, 10
- Posted CAS
- Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock
- Programmable CAS Write Latency (CWL) = 7 (DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE. 95°C
- Asynchronous Reset
- PCB: Height 1.180" (30.00mm), double sided component

















...

Kingstons KHX1600C9D3K2/4GX is a kit of two 256M x 64-bit 2GB (2048MB) DDR3-1600 M Hz CL9 SDRAM (Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel XMP (Extreme Memory Profiles). Total kit capacity is 4GB. Each module kit has been tested to run at DDR3-1600 M Hz at a low latency timing of 9-9-9-27 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333 M Hz timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers & requires +1.5V. The JEDEC standard electrical & mechanical specifications are as follows: ** Features**
- JEDEC standard 1.5V ± 0.075V Power Supply
- VDDQ = 1.5V ± 0.075V
- 667 M Hz f CK for 1333 Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 5, 6, 7, 8, 9, 10
- Posted CAS
- Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock
- Programmable CAS Write Latency (CWL) = 7 (DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE. 95°C
- Asynchronous Reset
- PCB: Height 1.180" (30.00mm), double sided component

















...

Be bold & aggressive with Hyper X black. It features a sleek black heat-spreader for greater heat dissipation to optimize reliability. It adds some edge to your rig
- & your game, with faster speeds & higher capacities
- without a hit to your wallet. Its Intel XMP ready, with XMP profiles built into the modules, so higher performing frequencies, timings & voltage are just a click away.

...

Be bold & aggressive with Hyper X black. It features a sleek black heat-spreader for greater heat dissipation to optimize reliability. It adds some edge to your rig
- & your game, with faster speeds & higher capacities
- without a hit to your wallet. Its Intel XMP ready, with XMP profiles built into the modules, so higher performing frequencies, timings & voltage are just a click away.

...

Kingstons KHX1866C11S3P1K2/4G is a kit of two 256M x 64-bit (2GB) DDR3-1866 CL11 SDRAM (Synchronous DRAM) 1 Rx 8 memory modules, based on eight 256M x 8-bit DDR3 FBGA components per module. Total kit capacity is 4GB. Each module kit has been tested to run at JEDEC DDR3-1866 at a low latency timing of 11-11-11 at 1.5V. Each 240-pin DIMM uses gold contact fingers & requires +1.5V **FEATURES**
- JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 933 M Hz f CK for 1866 Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
- Posted CAS
- Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock
- Programmable CAS Write Latency (CWL) = 9 (DDR3-1866)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 1.180" (30.00mm), single sided component

















...

Now equipped with the next-generation heat sink, Hyper X T1 memory kit is Kingstons latest offering for the most exquisite overclocking memory product one could ask for. Featuring an all new heat sink construction, the Hyper X T1 is capable of challenging the limits to deliver a new overclocking experience like never before. ** Specification**
- Kingston T1 4GB Hyper X
- Memory: 4096 MB
- DDR3
- 1866 MHz
- 2 x 2048 MB
- PC/server
- 240-pin DIMM
- Gold
- 256M x 64
- Energy management: 1.35 V ** Tri-channel Hyper X T1 features**
- The 1.65V operating voltage enables stable overclocking to make Intel Core-i 7 processors run faster with a longer lifecycle.
- All Hyper X series are compatible with Intel XMP auto-overclocking function.
- A Memory Kit specifically optimized for Intel Core-i 7 series processors.
- Exceptional clock & latency timing specifications to enhance overall system performance.
- Installing three memory kits will enable triple the amount of data to be transferred.
- A high capacity kit to offer comprehensive compatibility features for graphic/gaming applications; quenches your thirst for a performance upgrade.
- An all new heat sink design to achieve effective maintenance of speed while prolonging the memory lifecycle.
















...

**KHX6400D2LLK2/4G 4GB (2GB 256M x 64-Bit x 2 pcs.) PC2-6400 CL4 240-Pin DIMM Kit** Kingstons KHX6400D2LLK2/4G is a kit of two low-latency 256M x 64-bit 2GB (2048MB) DDR2- 800 CL4 SDRAM (Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR2 FBGA components per module. Total kit capacity is 4GB (4096MB). Each module pair has been tested to run at DDR2 800 M Hz at low latency timing of 4-4-4-12 at 1.95V. The SPD is programmed to JEDEC standard latency 667 Mhz timing of 5-5-5-15 at 1.8V. Each 240-pin DIMM uses gold contact fingers & requires +1.8V. ...

All Kingston® memory modules must perform properly to ensure maximum performance. Therefore, Kingston has developed an industry leading quality process to ensure that Kingston memory delivers superior quality, performance, & 100% compatibility with the computing system the module is designed for. Kingston, the world's largest independent memory manufacturer, has over 2, 000 memory products. In today's performance-driven environment, memory upgrades provide an easy, economical alternative to increase system performance. Every memory product Kingston offers is designed to help you get maximum performance at the best price to you. ...

**KHX1333C9D3K2/4G 4GB (2GB 256M x 64-Bit x 2 pcs.) DDR3-1333 M Hz CL9 240-Pin DIMM Kit** Kingstons KHX1333C9D3K2/4G is a kit of two 256M x 64-bit 2GB (2048MB) DDR3-1333 M Hz CL9 SDRAM (Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR3 FBGA components per module. Total kit capacity is 4GB. Each module kit has been tested to run at DDR3-1333 M Hz at a low latency timing of 9-9-9 at 1.6V. The SPDs are programmed to JEDEC standard latency DDR3-1333 M Hz timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers & requires +1.5V. ...