The NETGEAR Pro Safe 4100 series managed switches provide state-of-the-art, high-performance, IEEE-compliant network solutions. They include powerful management features that you can use to eliminate bottlenecks, boost performance, & increase productivity. ...

Intelligent Edge M4100 series consists of 12 fully managed switches ranging from 8-port Fast Ethernet to 50-port Gigabit Ethernet. They are ideal for all organizations considering reliable, affordable & simple access layer switching with CLI scripting, Layer 3 static routing as well as Po E scalability. As a cost-effective component of converged voice, video & data networking solutions, NETGEAR M4100 series delivers a secure, intelligent edge in commercial buildings & large campus LAN environments. Po E (802.3af) & Po E+ (802.3at) versions of M4100 series are perfect for Wireless access points, IP telephony, CCTV & video-surveillance deployments. ...

The NETGEAR Pro SAFE M4200-10MG-Po E+ Managed Switch was designed from the ground up to optimize the installation of Wave 2 11ac access points.

Includes:: eight full power Po E+ & multi-speed 1G, 2.5G ports for 100 meter cable runs, combined with two 10G uplinks for a fully non-blocking deployment of eight Wave 2 11ac access points. NETGEAR Multigigabit Ethernet is compatible with most major wireless & switching vendors managed solutions, & the only one with 8x 2.5G to the AP & 2x 10G line-rate aggregation to the wiring closet. Plenum rated, slim design & mounting accessories allow for access point placement optimization & cabling efficiency.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architectures provide advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-12X12F comes with 12 ports 10GBASE-T & 12 ports 10GBASE-X SFP+ in a half-width form factor. All 24 ports are independent & 1G backward compatible for progressive transition to 10G speeds. Ideal for server & storage aggregation: two half-width M4300 switches can be installed in a single rack space. M4300-12X12F is line-rate with 480 Gbps fabric for SMB core applications as well as spine & leaf stacking architectures.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architectures provide advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-24X24F comes with 24 ports 10GBASE-T & 24 ports 10GBASE-X SFP+ in a full-width form factor. All 48 ports are independent & 1G backward compatible for progressive transition to 10G speeds. Ideal for Top-of-Rack server & storage applications: 1+1 PSU protection & front to back cooling ensure hot & cold aisle compliance. M4300-24X24F is line-rate with 960 Gbps fabric for SMB core applications as well as spine & leaf stacking architectures.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-28G-Po E+ comes with 24 ports 1G Po E+ capable of full provisioning, 2 ports 10GBASE-T & 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent & can be used for stacking or uplinks: they are 1G backward compatible. In this GSM4328PB version, M4300-28G-Po E+ is delivering resilient & secure access layer in campus LAN environments & commercial buildings. Ideal for wireless access, unified communications & IP video applications: 630W (110V AC) or 720W (220V AC) Po E budget is provided by one APS1000W PSU. A second one will add 1+1 power redundancy in RPS mode, & extended 720W (110V AC) Po E budget in EPS shared mode.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-28G-Po E+ comes with 24 ports 1G Po E+ capable of full provisioning, 2 ports 10GBASE-T & 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent & can be used for stacking or uplinks: they are 1G backward compatible. In this GSM4328PA version, M4300-28G-Po E+ is delivering resilient & secure access layer in campus LAN environments & commercial buildings. Ideal for wireless access, unified communications & IP video applications: 480W Po E budget is provided by one APS550W PSU. A second one will add 1+1 power redundancy in RPS mode, & extended 720W Po E budget in EPS shared mode.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-52G comes with 48 ports 1G, 2 ports 10GBASE-T & 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent & can be used for stacking or uplinks: they are 1G backward compatible. M4300-52G is delivering resilient & secure access layer in campus LAN environments & commercial buildings. Ideal for server & storage applications: 1+1 PSU protection & front to back cooling ensure hot & cold aisle compliance.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-52G-Po E+ comes with 48 ports 1G Po E+ capable of full provisioning, 2 ports 10GBASE-T & 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent & can be used for stacking or uplinks: they are 1G backward compatible. In this GSM4352PB version, M4300-52G-Po E+ is delivering resilient & secure access layer in campus LAN environments & commercial buildings. Ideal for wireless access, unified communications & IP video applications: 591W (110V AC) or 860W (220V AC) Po E budget is provided by one APS1000W PSU. A second one will add 1+1 power redundancy in RPS mode, & extended 1, 010W (110V AC) or 1, 440W (220V AC) Po E budget in EPS shared mode. An additional RPS port is available for redundant power protection using external RPS, when both internal PSUs are used in EPS shared mode.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-52G-Po E+ comes with 48 ports 1G Po E+ capable of full provisioning, 2 ports 10GBASE-T & 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent & can be used for stacking or uplinks: they are 1G backward compatible. In this GSM4352PA version, M4300-52G-Po E+ is delivering resilient & secure access layer in campus LAN environments & commercial buildings. Ideal for wireless access, unified communications & IP video applications: 480W Po E budget is provided by one APS550W PSU. A second one will add 1+1 power redundancy in RPS mode, & extended 720W Po E budget in EPS shared mode.

...