The NETGEAR Pro Safe 4100 series managed switches provide state-of-the-art, high-performance, IEEE-compliant network solutions. They include powerful management features that you can use to eliminate bottlenecks, boost performance, & increase productivity. ...

The NETGEAR Pro Safe 4100 series managed switches provide state-of-the-art, high-performance, IEEE-compliant network solutions. They include powerful management features that you can use to eliminate bottlenecks, boost performance, & increase productivity. ...

Intelligent Edge M4100 series consists of 12 fully managed switches ranging from 8-port Fast Ethernet to 50-port Gigabit Ethernet. They are ideal for all organizations considering reliable, affordable & simple access layer switching with CLI scripting, Layer 3 static routing as well as Po E scalability. As a cost-effective component of converged voice, video & data networking solutions, NETGEAR M4100 series delivers a secure, intelligent edge in commercial buildings & large campus LAN environments. Po E (802.3af) & Po E+ (802.3at) versions of M4100 series are perfect for Wireless access points, IP telephony, CCTV & video-surveillance deployments. ...

The NETGEAR Pro SAFE M4200-10MG-Po E+ Managed Switch was designed from the ground up to optimize the installation of Wave 2 11ac access points.

Includes:: eight full power Po E+ & multi-speed 1G, 2.5G ports for 100 meter cable runs, combined with two 10G uplinks for a fully non-blocking deployment of eight Wave 2 11ac access points. NETGEAR Multigigabit Ethernet is compatible with most major wireless & switching vendors managed solutions, & the only one with 8x 2.5G to the AP & 2x 10G line-rate aggregation to the wiring closet. Plenum rated, slim design & mounting accessories allow for access point placement optimization & cabling efficiency.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architectures provide advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-12X12F comes with 12 ports 10GBASE-T & 12 ports 10GBASE-X SFP+ in a half-width form factor. All 24 ports are independent & 1G backward compatible for progressive transition to 10G speeds. Ideal for server & storage aggregation: two half-width M4300 switches can be installed in a single rack space. M4300-12X12F is line-rate with 480 Gbps fabric for SMB core applications as well as spine & leaf stacking architectures.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-28G comes with 24 ports 1G, 2 ports 10GBASE-T & 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent & can be used for stacking or uplinks: they are 1G backward compatible. M4300-28G is delivering resilient & secure access layer in campus LAN environments & commercial buildings. Ideal for server & storage applications: 1+1 PSU protection & front to back cooling ensure hot & cold aisle compliance.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-28G-Po E+ comes with 24 ports 1G Po E+ capable of full provisioning, 2 ports 10GBASE-T & 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent & can be used for stacking or uplinks: they are 1G backward compatible. In this GSM4328PB version, M4300-28G-Po E+ is delivering resilient & secure access layer in campus LAN environments & commercial buildings. Ideal for wireless access, unified communications & IP video applications: 630W (110V AC) or 720W (220V AC) Po E budget is provided by one APS1000W PSU. A second one will add 1+1 power redundancy in RPS mode, & extended 720W (110V AC) Po E budget in EPS shared mode.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-28G-Po E+ comes with 24 ports 1G Po E+ capable of full provisioning, 2 ports 10GBASE-T & 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent & can be used for stacking or uplinks: they are 1G backward compatible. In this GSM4328PA version, M4300-28G-Po E+ is delivering resilient & secure access layer in campus LAN environments & commercial buildings. Ideal for wireless access, unified communications & IP video applications: 480W Po E budget is provided by one APS550W PSU. A second one will add 1+1 power redundancy in RPS mode, & extended 720W Po E budget in EPS shared mode.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-52G comes with 48 ports 1G, 2 ports 10GBASE-T & 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent & can be used for stacking or uplinks: they are 1G backward compatible. M4300-52G is delivering resilient & secure access layer in campus LAN environments & commercial buildings. Ideal for server & storage applications: 1+1 PSU protection & front to back cooling ensure hot & cold aisle compliance.

...

The NETGEAR M4300 Switch Series delivers L2/L3/L4 & IPv 4/IPv 6 rich services for enterprise edge & SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing & virtually zero downtime. License-free L3 feature set

Includes:: static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) & Open Flow 1.3 enabled for your network. M4300-52G-Po E+ comes with 48 ports 1G Po E+ capable of full provisioning, 2 ports 10GBASE-T & 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent & can be used for stacking or uplinks: they are 1G backward compatible. In this GSM4352PB version, M4300-52G-Po E+ is delivering resilient & secure access layer in campus LAN environments & commercial buildings. Ideal for wireless access, unified communications & IP video applications: 591W (110V AC) or 860W (220V AC) Po E budget is provided by one APS1000W PSU. A second one will add 1+1 power redundancy in RPS mode, & extended 1, 010W (110V AC) or 1, 440W (220V AC) Po E budget in EPS shared mode. An additional RPS port is available for redundant power protection using external RPS, when both internal PSUs are used in EPS shared mode.

...