The DFL-1600 VPN Firewall delivers complete network protection & Virtual Private Network (VPN) services for large businesses. Through robust security features, flexible configuration & maximum network protection, it offers a high return on investment to businesses that demand high performance at competitive prices. Within an industrial chassis, the DFL-1600 VPN firewall offers an impressive set of hardware features that include a high-speed processor, a large database & a powerful firewall engine that can handle up to 400, 000 concurrent sessions. The DFL-1600

Includes:: multiple user-configurable Gigabit ports for flexible, scalable & cost effective network deployments with fail-over & outbound load balancing 1. In addition, two DFL-1600 firewalls can be installed in parallel for redundancy: the passive one serving as back-up in case of the failure of the active one (High Availability). 1functionality available in an upcoming firmware update The DFL-1600

Includes:: a special feature called Zone Defense
- a mechanism that operates seamlessly with D-Link x Stack switches to perform proactive network security. Zone Defense automatically quarantines infected computers on the network & prevents them from flooding the network with malicious traffic. The DFL-1600 offers two levels of Intrusion Prevention:
- Basic: countering well-known threats & periodically updated, this level is included free of charge.
- Advanced: using component-based signature technology, designed to detect unknown network attacks (zero-day protection) & updated in real time via the D-Link Net Defend Centre, which is included free of charge for a 3 month period & which is then available after this time as a purchase subscription. The DFL-1600 provides advanced traffic shaping technology, allowing administrators to prioritise & differentiate network traffic & set bandwidth limits. Furthermore, the DFL-1600 supports Server Load Balancing (SLB), which allows network service deman






...

The D-Link DGE-528T is a high-performance 10/100/1000 Mbps copper Gigabit PCI card for desktop PC. Capable of running at full-duplex Gigabit speed, this card gives your PC 2000 Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fiber-optic, the card means that you can instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. The card supports 10/100/1000 Mbps network speed auto-sensing & full/half duplex auto-negotiation. The card provides on-board screening of VLANs Tagged Ethernet frames, allowing your PC to be configured with VLAN-supported switch. Your PC can be part of a VLAN network, where domains are segmented up to enhance performance & security. Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function allowing a powered OFF computer to be powered ON from a remote station. This function allows the administrator to send wake-up signals to a computer. The WOL function provides a great utility for power management of the PC & allows users to initiate action at irregular times & from distant locations. The cards embedded flow control & independent FIFO provide a means to protect against possible data loss during transmission on the network. When connected to a Gigabit switch supporting flow control, the card receives signals from the switch regarding buffer overrun during peak usage periods. The card then delays transmission until the switch is ready again to accept new data. Using a single chip solution, this card is very small in size & consumes very little power of your computer system. ...

The D-Link DGE-528T is a high-performance 10/100/1000 Mbps copper Gigabit PCI card for desktop PC. Capable of running at full-duplex Gigabit speed, this card gives your PC 2000 Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fiber-optic, the card means that you can instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. The card supports 10/100/1000 Mbps network speed auto-sensing & full/half duplex auto-negotiation. The card provides on-board screening of VLANs Tagged Ethernet frames, allowing your PC to be configured with VLAN-supported switch. Your PC can be part of a VLAN network, where domains are segmented up to enhance performance & security. Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function allowing a powered OFF computer to be powered ON from a remote station. This function allows the administrator to send wake-up signals to a computer. The WOL function provides a great utility for power management of the PC & allows users to initiate action at irregular times & from distant locations. The card's embedded flow control & independent FIFO provide a means to protect against possible data loss during transmission on the network. When connected to a Gigabit switch supporting flow control, the card receives signals from the switch regarding buffer overrun during peak usage periods. The card then delays transmission until the switch is ready again to accept new data. Using a single chip solution, this card is very small in size & consumes very little power of your computer system. ...

The D-Link DGE-528T is a high-performance 10/100/1000 Mbps copper Gigabit PCI card for desktop PC. Capable of running at full-duplex Gigabit speed, this card gives your PC 2000 Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fiber-optic, the card means that you can instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. The card supports 10/100/1000 Mbps network speed auto-sensing & full/half duplex auto-negotiation. The card provides on-board screening of VLANs Tagged Ethernet frames, allowing your PC to be configured with VLAN-supported switch. Your PC can be part of a VLAN network, where domains are segmented up to enhance performance & security. Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function allowing a powered OFF computer to be powered ON from a remote station. This function allows the administrator to send wake-up signals to a computer. The WOL function provides a great utility for power management of the PC & allows users to initiate action at irregular times & from distant locations. The card's embedded flow control & independent FIFO provide a means to protect against possible data loss during transmission on the network. When connected to a Gigabit switch supporting flow control, the card receives signals from the switch regarding buffer overrun during peak usage periods. The card then delays transmission until the switch is ready again to accept new data. Using a single chip solution, this card is very small in size & consumes very little power of your computer system. ...

D-Link's DGS-105 & DGS-108 Gigabit Ethernet switches provide a cost-effective way for small & medium sized businesses to create a small network & connect computers, wireless Access Points, IP cameras, network printers & other Ethernet devices quickly & easily without complicated configurations. These switches come with 5 or 8 Gigabit Ethernet ports with an auto-sensing function to detect the maximum speed of the connected devices, allowing you to run your network with the best possible performance. Their fanless design & solid metal housing makes them completely silent so they are ideal for offices, libraries or meeting rooms, & for industrial & hazardous environments like factories & warehouses. The DGS-105 & DGS-108 are designed with durability & performance in mind. Their sturdy metal housing will protect them against accidental harm, while helping to dissipate heat & to reduce stress on internal components. The LEDs allow for an easy reading of each port status & speed, helping to troubleshoot connectivity problems. For a convenient placement, these switches come with a wall mounting kit & a slot for a Kensington security lock to protect them from theft. Despite being unmanaged, Plug & Play switches, the DGS-105 & DGS-108 are able to classify network traffic by assessing the 802.1p field in the Ethernet frames, & forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice & data traffic without delays or loss of quality. The cable diagnostics function enables users to quickly troubleshoot faulty network cables that may lead to transmission errors. At startup, the switch performs a micro-test to assess the quality of the cables connected to its ports. If a fault is detected, the ambar LED will lit up. If the cables pass the test, the green LED will be illuminated, indicating that the network is error-free. This feature can save valuable time when trying to single out ...

The DGS-3130 Series switches are Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast, & enhanced security, making them an ideal Gigabit access layer solution. The DGS-3130-54TS provides 48 10/100/1000 Mbps Gigabit Ethernet ports. The DGS-3130-54PS provides 48 10/100/1000 Mbps Power over Ethernet (Po E) Gigabit Ethernet ports. The DGS-3130-54S provides 48 SFP Gigabit Ethernet ports. Each 10/100/1000 Mbps port on the DGS-3130-54PS supports the 802.3af & 802.3at Po E standards. The default power budget for these models is 370 watts & can be expanded to 740 watts with the DPS-700 RPS. The switches are also equipped with an USB (Universal Serial Bus) 2.0 port, allowing the user to boot images & upload configuration files directly from, as well as conveniently save syslog files onto a USB (Universal Serial Bus) 2.0 storage device. ...

The DGS-3130 Series switches are Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast, & enhanced security, making them an ideal Gigabit access layer solution. ...

The DGS-3130 Series switches are Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast, & enhanced security, making them an ideal Gigabit access layer solution. ...

The DGS-3130 Series switches are Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast, & enhanced security, making them an ideal Gigabit access layer solution. ...

The DGS-3130 Series switches are Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast, & enhanced security, making them an ideal Gigabit access layer solution. ...