D-Links DFE-530TX Fast Ethernet adapter is a high-performance auto-sensing 10/100 Mbps dual-speed adapter for the PCI bus. The adapter operates in the 32-bit Bus Master mode, delivering throughputs at multi-megabits per second with little stress on hosts CPU. Network administrators can install optional boot ROMs on the adapters to implement network security. Diskless workstations equipped with these ROMs can remote boot from Net Ware or Windows NT servers & access authorized data. The adapter supports all major network operating systems, including Net Ware, Windows & Linux. ...

The D-Link DFE-550TX is a manageable 10/100MB Dual Speed Ethernet PCI Network Interface Card with Wake-On-LAN (WOL). It is fully compliant with IEEE802.3 10 Base-T, IEEE 802.3u 100 Base-T specifications as well as IEEE 802.3x Flow Control. Aside from the ACPI/WOL (Advanced Configuration Power Management Interface) feature, the DFE-550TX supports IP Multicast packet filtering, PXE (Pre Boot execution Environment) Boot ROM, IEEE 802.1p, IEEE 802.1Q, & DMI (Desktop Management Interface). For standard network functions, the DFE-550TX utilizes plug-&-play feature for easy installation. The DFE-550 T Xs single RJ-45 connector automatically negotiates to the highest speed at half or full duplex using industry standard NWay auto-negotiation. With the PCI 32-bit data bus, the DFE-550TX delivers high throughput without using on board memory. Integrated 2 Kbyte Rx FIFO & 2 Kbyte Tx FIFO cache buffers synchronize transmissions & buffer data to help prevent packet loss. The DFE-550 T Xs compliance to PCI 2.2 Bus

Specification along with its integrated FIFO buffers lower overall CPU utilization. The DFE-550 T Xs compliance to IEEE 802.1p Priority Tagging ensures that time-critical data arrives on time by using tagging to define the data packets priority. Whereas, compliance to IEEE 802.1Q improve network performance & security by limiting broadcast & unicast (node to node) traffic within a single VLAN. The value-added management features offered by DMI allow remote troubleshooting & higher quality management of computers equipped with the DFE-550TX. Finally, the DFE-550TX support for PXE Boot ROM as well as RPL (Remote Program Load) enhances the manageability of the client computer. The DFE-550TX ships complete with a WOL cable & drivers for the most popular operating systems including Windows, Netware, & Linux.

...

The DFL-1600 VPN Firewall delivers complete network protection & Virtual Private Network (VPN) services for large businesses. Through robust security features, flexible configuration & maximum network protection, it offers a high return on investment to businesses that demand high performance at competitive prices. Within an industrial chassis, the DFL-1600 VPN firewall offers an impressive set of hardware features that include a high-speed processor, a large database & a powerful firewall engine that can handle up to 400, 000 concurrent sessions. The DFL-1600

Includes:: multiple user-configurable Gigabit ports for flexible, scalable & cost effective network deployments with fail-over & outbound load balancing 1. In addition, two DFL-1600 firewalls can be installed in parallel for redundancy: the passive one serving as back-up in case of the failure of the active one (High Availability). 1functionality available in an upcoming firmware update The DFL-1600

Includes:: a special feature called Zone Defense
- a mechanism that operates seamlessly with D-Link x Stack switches to perform proactive network security. Zone Defense automatically quarantines infected computers on the network & prevents them from flooding the network with malicious traffic. The DFL-1600 offers two levels of Intrusion Prevention:
- Basic: countering well-known threats & periodically updated, this level is included free of charge.
- Advanced: using component-based signature technology, designed to detect unknown network attacks (zero-day protection) & updated in real time via the D-Link Net Defend Centre, which is included free of charge for a 3 month period & which is then available after this time as a purchase subscription. The DFL-1600 provides advanced traffic shaping technology, allowing administrators to prioritise & differentiate network traffic & set bandwidth limits. Furthermore, the DFL-1600 supports Server Load Balancing (SLB), which allows network service deman






...

The D-Link DGE-528T is a high-performance 10/100/1000 Mbps copper Gigabit PCI card for desktop PC. Capable of running at full-duplex Gigabit speed, this card gives your PC 2000 Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fiber-optic, the card means that you can instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. The card supports 10/100/1000 Mbps network speed auto-sensing & full/half duplex auto-negotiation. The card provides on-board screening of VLANs Tagged Ethernet frames, allowing your PC to be configured with VLAN-supported switch. Your PC can be part of a VLAN network, where domains are segmented up to enhance performance & security. Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function allowing a powered OFF computer to be powered ON from a remote station. This function allows the administrator to send wake-up signals to a computer. The WOL function provides a great utility for power management of the PC & allows users to initiate action at irregular times & from distant locations. The cards embedded flow control & independent FIFO provide a means to protect against possible data loss during transmission on the network. When connected to a Gigabit switch supporting flow control, the card receives signals from the switch regarding buffer overrun during peak usage periods. The card then delays transmission until the switch is ready again to accept new data. Using a single chip solution, this card is very small in size & consumes very little power of your computer system. ...

The D-Link DGE-528T is a high-performance 10/100/1000 Mbps copper Gigabit PCI card for desktop PC. Capable of running at full-duplex Gigabit speed, this card gives your PC 2000 Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fiber-optic, the card means that you can instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. The card supports 10/100/1000 Mbps network speed auto-sensing & full/half duplex auto-negotiation. The card provides on-board screening of VLANs Tagged Ethernet frames, allowing your PC to be configured with VLAN-supported switch. Your PC can be part of a VLAN network, where domains are segmented up to enhance performance & security. Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function allowing a powered OFF computer to be powered ON from a remote station. This function allows the administrator to send wake-up signals to a computer. The WOL function provides a great utility for power management of the PC & allows users to initiate action at irregular times & from distant locations. The card's embedded flow control & independent FIFO provide a means to protect against possible data loss during transmission on the network. When connected to a Gigabit switch supporting flow control, the card receives signals from the switch regarding buffer overrun during peak usage periods. The card then delays transmission until the switch is ready again to accept new data. Using a single chip solution, this card is very small in size & consumes very little power of your computer system. ...

D-Link's DGS-105 & DGS-108 Gigabit Ethernet switches provide a cost-effective way for small & medium sized businesses to create a small network & connect computers, wireless Access Points, IP cameras, network printers & other Ethernet devices quickly & easily without complicated configurations. These switches come with 5 or 8 Gigabit Ethernet ports with an auto-sensing function to detect the maximum speed of the connected devices, allowing you to run your network with the best possible performance. Their fanless design & solid metal housing makes them completely silent so they are ideal for offices, libraries or meeting rooms, & for industrial & hazardous environments like factories & warehouses. The DGS-105 & DGS-108 are designed with durability & performance in mind. Their sturdy metal housing will protect them against accidental harm, while helping to dissipate heat & to reduce stress on internal components. The LEDs allow for an easy reading of each port status & speed, helping to troubleshoot connectivity problems. For a convenient placement, these switches come with a wall mounting kit & a slot for a Kensington security lock to protect them from theft. Despite being unmanaged, Plug & Play switches, the DGS-105 & DGS-108 are able to classify network traffic by assessing the 802.1p field in the Ethernet frames, & forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice & data traffic without delays or loss of quality. The cable diagnostics function enables users to quickly troubleshoot faulty network cables that may lead to transmission errors. At startup, the switch performs a micro-test to assess the quality of the cables connected to its ports. If a fault is detected, the ambar LED will lit up. If the cables pass the test, the green LED will be illuminated, indicating that the network is error-free. This feature can save valuable time when trying to single out ...

The DGS-1210 Series Gigabit Smart Managed Switches is the latest generation of D-Link Smart Managed Switches featuring D-Link Green 3.0 technology. The series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 6. By offering multiple management options, the Smart Managed Switches allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1210 Series Smart Managed Switches provide functionality, security, & manageability for a fraction of the standard cost of ownership. ...

The DGS-3130 Series switches are Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast, & enhanced security, making them an ideal Gigabit access layer solution. The DGS-3130-54TS provides 48 10/100/1000 Mbps Gigabit Ethernet ports. The DGS-3130-54PS provides 48 10/100/1000 Mbps Power over Ethernet (Po E) Gigabit Ethernet ports. The DGS-3130-54S provides 48 SFP Gigabit Ethernet ports. Each 10/100/1000 Mbps port on the DGS-3130-54PS supports the 802.3af & 802.3at Po E standards. The default power budget for these models is 370 watts & can be expanded to 740 watts with the DPS-700 RPS. The switches are also equipped with an USB (Universal Serial Bus) 2.0 port, allowing the user to boot images & upload configuration files directly from, as well as conveniently save syslog files onto a USB (Universal Serial Bus) 2.0 storage device. ...

The DGS-3130 Series switches are Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast, & enhanced security, making them an ideal Gigabit access layer solution. ...

The DGS-3130 Series switches are Lite Layer 3 Stackable Managed Switches designed to connect end-users in a secure enterprise or metro Ethernet access network. These switches support multicast, & enhanced security, making them an ideal Gigabit access layer solution. ...