This USB (Universal Serial Bus) Adapter enables you to transform your wireless Internet connection by using Wireless AC Technology, the fastest wireless technology available today. You can download web content & synch files to a mobile device up to 4 times faster* than the previous standard, & have extended coverage around your home with fewer wireless deadspots. Get revolutionary wireless speeds which allow you to check your email & surf the Internet or game, make Skype™ calls & stream HD movies to multiple devices using the interference-free 5 G Hz b&. Wireless AC Technology The latest in wireless, 802.11ac Technology, brings you the fastest speeds, extended coverage around the home & fewer wireless deadspots. Get revolutionary wireless speeds for flawless HD video streaming to multiple devices.. Dramatically improve the wireless coverage in your home, allowing you to watch HD-quality video from more devices, in more places, simultaneously. Compatible with all your wireless products While the Wireless AC Dualband Adapter delivers cutting-edge 802.11ac speed to your home network, it's also backward compatible with all of your current wireless products
- no updates necessary. Easy WPS push button setup Quickly & easily establish a fast, secure Internet connection that will have you browsing, streaming, & watching in minutes. It's as easy as push & connect! * When compared with Wireless N 300
...

The AC1900 Ultra Wi-Fi USB (Universal Serial Bus) Adapter lets you upgrade your desktop or laptop to the latest generation wireless AC speeds, so you can easily stream HD media, download music, & enjoy high-speed online gaming. ...

Connect to a high-speed wireless network with D-Link's Wireless N Dualband PCIe Adapter. This adapter uses Dualband technology to create two networks allowing you to connect at speeds of up to 300 Mbps in either the more commonly used 2.4 GHz band
- for Internet surfing, emailing or online shopping- or the less congested 5 GHz band
- ideal for gaming & High Definition streaming. This is the ideal adapter if you are looking to update your desktop computer to provide you with the fastest wireless speeds today. It is an excellent complement for households that already have Dualband technology in their homes. This adapter is designed for home users looking for a wireless connection that can handle video streaming throughout the house, & is the ideal complement for D-Link's Dualband routers like the Dualband HD Media Router (DIR-857). To protect your data & privacy, the Wireless N Dualband PCIe Adapter supports WEP, WPA, & WPA2 encryption for connecting to a secure wireless network, keeping your network traffic secure. The Wi-Fi Protected Setup (WPS) feature enables devices to easily establish a secure connection to an Access Point or wireless router, eliminating the need for complex encryption codes. The Wireless N Dualband PCIe Adapter provides a 300 Mbps high-speed connection to other Wireless N 150 or Wireless N devices, & is backwards compatible with 802.11g & 802.11a devices, ensuring interoperability with a wide range of wireless routers & existing networks.

...

The DWA-582 Wireless AC1200 Dual-Band PCI Express Adapter connects your computer to a high-speed network & provides a blazing-fast Wireless AC connection with superior reception. Once connected, you can access your network's high-speed Internet connection while also getting secure access to shared photos, files, music, video, printers & storage. ...

D-Link's DWC-2000 Unified Wireless Controller is a cost-effective wireless management solution suitable for large Access Point deployments. Capable of managing 64 Unified Wireless Access Points Out of the box, it provides a Reliable, Secure, Self-Healing, Scalable wireless network suitable for education, hospitality & businesses of any size. ...

The DWL-2600AP unified N single-band Po E access point is a best-in-class indoor access point designed specifically for business-class environments. With high data transmission speeds & access point load balancing, the DWL-2600AP offers high-quality & reliable wireless service. Versatile & powerful, the DWL-2600AP can be flexibly deployed as a standalone wireless access point or as a managed access point controlled by a D-Link unified wireless switch or wireless controller. Businesses can start with standalone mode deployment, & then migrate to a centrally managed system anytime later. ...

The DWL-P50 Power over Ethernet adapter is a single-port splitter that provides DC power for a non-Po E-equipped device, such as a surveillance camera or a wireless access point. It is designed to operate with LAN switches & other equipment that support industry-standard 802.3af Power over Ethernet (Po E) to deliver operation power to the networked device, allowing you to install the device at places such as on a rooftop or near a ceiling, where power is not easily accessible. The DWL-P50 supports both 5VDC & 12VDC power & can be flexibly deployed with network devices with different power voltage requirements. The DWL-P50 is useful for installation at a factory or TM Wi-Fi hot spot. This compact adapter means that you can install your surveillance cameras & wireless LAN devices on a building rooftop, on or near a ceiling for maximum coverage. Your cameras or wireless access points can be placed up to 100 meters away from a power source. It is at these places that wall AC outlets are inaccessible & providing power to these locations is difficult & expensive. The DWL-P50 is also handy for installation at offices with Internet telephones connected to a Po E Ethernet switch. It eliminates the need to individually power each IP phone. By transmitting remote power through the standard network cabling, the DWL-P50 does away with the need for an AC outlet at each device location. Only a single Ethernet cable is run to each device instead of separate power & data cables. On a standard 4-wire UTP Category 5 cable, only two pairs (pins 1, 2, 3 & 6) are used for Ethernet data transfer. At one end, your Po E Ethernet switch inserts DC voltage into the unused wires, taking advantage of the unused pair of the network cable wires. At the other end, the DWL-P50 taps the DC power from the Ethernet cable for use by the non-Po E device. Consequently, a single Category 5 cable can now carry both Ethernet data & DC power. The idea is to supply the remote end with power and ...

The DWL-P50 Power over Ethernet adapter is a single-port splitter that provides DC power for a non-Po E-equipped device, such as a surveillance camera or a wireless access point. It is designed to operate with LAN switches & other equipment that support industry-standard 802.3af Power over Ethernet (Po E) to deliver operation power to the networked device, allowing you to install the device at places such as on a rooftop or near a ceiling, where power is not easily accessible. The DWL-P50 supports both 5VDC & 12VDC power & can be flexibly deployed with network devices with different power voltage requirements. The DWL-P50 is useful for installation at a factory or TM Wi-Fi hot spot. This compact adapter means that you can install your surveillance cameras & wireless LAN devices on a building rooftop, on or near a ceiling for maximum coverage. Your cameras or wireless access points can be placed up to 100 meters away from a power source. It is at these places that wall AC outlets are inaccessible & providing power to these locations is difficult & expensive. The DWL-P50 is also handy for installation at offices with Internet telephones connected to a Po E Ethernet switch. It eliminates the need to individually power each IP phone. By transmitting remote power through the standard network cabling, the DWL-P50 does away with the need for an AC outlet at each device location. Only a single Ethernet cable is run to each device instead of separate power & data cables. On a standard 4-wire UTP Category 5 cable, only two pairs (pins 1, 2, 3 & 6) are used for Ethernet data transfer. At one end, your Po E Ethernet switch inserts DC voltage into the unused wires, taking advantage of the unused pair of the network cable wires. At the other end, the DWL-P50 taps the DC power from the Ethernet cable for use by the non-Po E device. Consequently, a single Category 5 cable can now carry both Ethernet data & DC power. The idea is to supply the remote end with power and ...

The DWL-P50 Power over Ethernet adapter is a single-port splitter that provides DC power for a non-Po E-equipped device, such as a surveillance camera or a wireless access point. It is designed to operate with LAN switches & other equipment that support industry-standard 802.3af Power over Ethernet (Po E) to deliver operation power to the networked device, allowing you to install the device at places such as on a rooftop or near a ceiling, where power is not easily accessible. The DWL-P50 supports both 5VDC & 12VDC power & can be flexibly deployed with network devices with different power voltage requirements. The DWL-P50 is useful for installation at a factory or TM Wi-Fi hot spot. This compact adapter means that you can install your surveillance cameras & wireless LAN devices on a building rooftop, on or near a ceiling for maximum coverage. Your cameras or wireless access points can be placed up to 100 meters away from a power source. It is at these places that wall AC outlets are inaccessible & providing power to these locations is difficult & expensive. The DWL-P50 is also handy for installation at offices with Internet telephones connected to a Po E Ethernet switch. It eliminates the need to individually power each IP phone. By transmitting remote power through the standard network cabling, the DWL-P50 does away with the need for an AC outlet at each device location. Only a single Ethernet cable is run to each device instead of separate power & data cables. On a standard 4-wire UTP Category 5 cable, only two pairs (pins 1, 2, 3 & 6) are used for Ethernet data transfer. At one end, your Po E Ethernet switch inserts DC voltage into the unused wires, taking advantage of the unused pair of the network cable wires. At the other end, the DWL-P50 taps the DC power from the Ethernet cable for use by the non-Po E device. Consequently, a single Category 5 cable can now carry both Ethernet data & DC power. The idea is to supply the remote end with power and ...

The DWM-222 4G LTE USB (Universal Serial Bus) Adapter is a portable travel modem that means that you can connect to the Internet wherever you are. With fast downlink & uplink data rates, as well as low latency, it provides you with a high-performance & responsive connection when you're on the road. ...