The DEM-CB50CXP 50cm 120G CXP stacking cable enables DXS-3600-32S managed swtich to be stacked via optional DXS-3600-EM-Stack expansion modules. ...

The DES-1005D 5-Port Fast Ethernet Unmanaged Desktop Switch is a five port fast Ethernet switch that means that you can quickly set up a wired network. Connect the DES-1005D to multiple computers together to share files & folders, or connect it to a router to share an Internet connection. No configuration is required, making this switch completely plug-&-play. ** Auto-Sensing 10/100 Ports** The DES-1005D 5-Port Fast Ethernet Unmanaged Desktop Switch uses auto-sensing 10/100 Mbps ports, allowing a small workgroup to flexibly connect to Ethernet & Fast Ethernet devices to create an integrated network. These ports detect the network speed & auto-negotiate between 10BASE-T & 100BASE-TX, as well as between full & half-duplex, allowing you to get the maximum speed possible for each device connected to your network. ** Auto MDI/MDIX Crossover** All ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be plugged directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables. ** Flow Control for Secure Transmission** 802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full. This gives you a more reliable connection for all of your connected devices. ...

The DES-1016D is an unmanaged 10/100 Mbps switch designed to enhance workgroup performance whilst providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10 Mbps or 100 Mbps network to multiply bandwidths, boost response time & satisfy heavy load demands. The switch provides 16 ports, all supporting the NWay standard. The ports negotiate between 10BASE-T & 100BASE-TX network speeds, as well as between full & half duplex. In full duplex mode, the switchs embedded flow control provides a means to protect users against possible data loss during transmission on the network. When connected to a LAN adapter (in a server PC) that supports flow control, the switch sends signals to the PC regarding buffer overrun during peak usage periods. The PC then delays transmission until the switch is ready again to accept new data. ...

The DES-1016D is an unmanaged 10/100 Mbps switch designed to enhance workgroup performance whilst providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10 Mbps or 100 Mbps network to multiply bandwidths, boost response time & satisfy heavy load demands. The switch provides 16 ports, all supporting the NWay standard. The ports negotiate between 10BASE-T & 100BASE-TX network speeds, as well as between full & half duplex. In full duplex mode, the switch's embedded flow control provides a means to protect users against possible data loss during transmission on the network. When connected to a LAN adapter (in a server PC) that supports flow control, the switch sends signals to the PC regarding buffer overrun during peak usage periods. The PC then delays transmission until the switch is ready again to accept new data. ...

The DES-1016D 16-Port Fast Ethernet Unmanaged Desktop Switch is designed to enhance workgroup performance while providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10 Mbps or 100 Mbps network to multiply bandwidths, boost response time & satisfy heavy load demands. ...

The D-Link DES-1018P/DES-1018MP 18-Port Fast Ethernet Po E Switches with 2 Gigabit Uplink Ports enables users to easily connect & supply power to Po E-capable devices such as wireless access points (APs), network cameras & IP phones. They can also connect other Ethernet devices like computers, printers & network attached storage (NAS) to fit into any type of network application. ...

The D-Link DES-1018P 18-Port Fast Ethernet Po E Switch with 2 Gigabit Uplink ports enables users to easily connect & supply power to Po E-capable devices such as wireless access points (APs), network cameras & IP phones. The DES-1018P can also connect other Ethernet devices like computers, printers & network attached storage (NAS) to fit into any type of network application. The DES-1018P features 8 ports that support the IEEE 802.3af Po E protocol. Each of the Po E ports can supply up to 15.4 watts, with a total Po E budget of 80 watts, allowing users to attach an IEEE 802.3af-compliant device to the DES-1018P without requiring additional power. Po E is especially suitable for devices that are far from power outlets or when users want to minimize the clutter of extra cables as power is supplied via the Ethernet cables themselves. The addition of 2 Gigabit combo uplink ports means businesses can increase their network bandwidth via wired speed while offering redundancy so voice & surveillance data are transferred reliably. The combo design can increase bandwidth by offering two Gigabit copper or fiber connections, giving administrators more options for expansion. To help small businesses save on operating costs, the DES-1018P supports IEEE 802.3az Energy Efficient Ethernet (EEE). This feature senses network traffic to automatically put ports that are not being used to sleep & also powers them on as required. The DES-1018P is a plug & play device that requires no configuration, so setup is simple & hassle-free. Simply connect the switch to a network to connect multiple computers, share files & make Vo IP calls. Support for Auto MDI/MDI-X on all ports eliminates the need for crossover cables when connecting to another switch or hub. Auto-Negotiation on each port senses the link speed of a network device (either 10 or 100) & intelligently adjusts for compatibility & optimal performance. Combining the convenience of Po E, fast performance, rel ...

The D-Link DES-1018P/DES-1018MP 18-Port Fast Ethernet Po E Switches with 2 Gigabit Uplink Ports enables users to easily connect & supply power to Po E-capable devices such as wireless access points (APs), network cameras & IP phones. They can also connect other Ethernet devices like computers, printers & network attached storage (NAS) to fit into any type of network application. ...

D-Links DFE-530TX Fast Ethernet adapter is a high-performance auto-sensing 10/100 Mbps dual-speed adapter for the PCI bus. The adapter operates in the 32-bit Bus Master mode, delivering throughputs at multi-megabits per second with little stress on hosts CPU. Network administrators can install optional boot ROMs on the adapters to implement network security. Diskless workstations equipped with these ROMs can remote boot from Net Ware or Windows NT servers & access authorized data. The adapter supports all major network operating systems, including Net Ware, Windows & Linux. ...

The D-Link DFE-550TX is a manageable 10/100MB Dual Speed Ethernet PCI Network Interface Card with Wake-On-LAN (WOL). It is fully compliant with IEEE802.3 10 Base-T, IEEE 802.3u 100 Base-T specifications as well as IEEE 802.3x Flow Control. Aside from the ACPI/WOL (Advanced Configuration Power Management Interface) feature, the DFE-550TX supports IP Multicast packet filtering, PXE (Pre Boot execution Environment) Boot ROM, IEEE 802.1p, IEEE 802.1Q, & DMI (Desktop Management Interface). For standard network functions, the DFE-550TX utilizes plug-&-play feature for easy installation. The DFE-550 T Xs single RJ-45 connector automatically negotiates to the highest speed at half or full duplex using industry standard NWay auto-negotiation. With the PCI 32-bit data bus, the DFE-550TX delivers high throughput without using on board memory. Integrated 2 Kbyte Rx FIFO & 2 Kbyte Tx FIFO cache buffers synchronize transmissions & buffer data to help prevent packet loss. The DFE-550 T Xs compliance to PCI 2.2 Bus

Specification along with its integrated FIFO buffers lower overall CPU utilization. The DFE-550 T Xs compliance to IEEE 802.1p Priority Tagging ensures that time-critical data arrives on time by using tagging to define the data packets priority. Whereas, compliance to IEEE 802.1Q improve network performance & security by limiting broadcast & unicast (node to node) traffic within a single VLAN. The value-added management features offered by DMI allow remote troubleshooting & higher quality management of computers equipped with the DFE-550TX. Finally, the DFE-550TX support for PXE Boot ROM as well as RPL (Remote Program Load) enhances the manageability of the client computer. The DFE-550TX ships complete with a WOL cable & drivers for the most popular operating systems including Windows, Netware, & Linux.

...