This desktop switch offers an inexpensive alternative to fibre optics for the SOHO & small & medium business (SMB). Increasing network loads can be handled with the increased bandwidth of Gigabit Ethernet. ** Gigabit connectivity without fibre** The switch provides 8 Gigabit ports in the familiar Ethernet format, so it works seamlessly with existing network cables (Cat 5 or higher). Up to 2000 Mbps can be achieved in full-duplex mode, giving workstations bottleneck-free access to server data. ** Plug-&-Play installation** All there is to do is plug the cables into the switch. All ports support both straight-through & crossover cable types, eliminating the need for an uplink port. & with 10/100/1000 Mbps auto-sensing, no configuration is required. ** Think Green** By sensing whether attached devices are ON or OFF & estimating the cable length, the switch is able to adjust its power consumption, for a total saving of up to 40%*. * Figure based on a scenario assuming that PCs are used for 10 hours a day, powered off 14 hours a day & connected to the switch using 20m cables.
- Power-saving feature, up to 40%* less power consumption (dlink green version only)
- 8 Gigabit Ethernet ports
- Plug-&-play installation
- Desktop size, no fan



...

This desktop switch offers an inexpensive alternative to fibre optics for the SOHO & small & medium business (SMB). Increasing network loads can be handled with the increased bandwidth of Gigabit Ethernet. ** Gigabit connectivity without fibre** The switch provides 8 Gigabit ports in the familiar Ethernet format, so it works seamlessly with existing network cables (Cat 5 or higher). Up to 2000 Mbps can be achieved in full-duplex mode, giving workstations bottleneck-free access to server data. ** Plug-&-Play installation** All there is to do is plug the cables into the switch. All ports support both straight-through & crossover cable types, eliminating the need for an uplink port. & with 10/100/1000 Mbps auto-sensing, no configuration is required. ** Think Green** By sensing whether attached devices are ON or OFF & estimating the cable length, the switch is able to adjust its power consumption, for a total saving of up to 40%*. * Figure based on a scenario assuming that PCs are used for 10 hours a day, powered off 14 hours a day & connected to the switch using 20m cables.
- Power-saving feature, up to 40%* less power consumption (dlink green version only)
- 8 Gigabit Ethernet ports
- Plug-&-play installation
- Desktop size, no fan



...

The DES-1008P 8-port switch can convey power to up to four network devices via the usual network cables using Power over Ethernet technology. This provides a cost-effective entry-level solution for users wishing to make the most of their network. The DES-1008P enables users to easily connect & supply power to devices such as wireless Access Points (AP), IP cameras & IP phones via the common network cables. As a switch, the DES-1008P can be used to share files, music & video across your network or create a multi-player gaming environment. Users can also add multiple computers, printers, Network Attached Storage (NAS) & any other Ethernet device onto a network. This device runs ultra-quiet, making it ideal for both home & small office use. In addition, it can be wall-mounted to save desktop space. ...

The DGS-1008P offers an economical way for SOHO & small to medium businesses (SMB) to benefit from the increased bandwidth of Gigabit Ethernet. It provides 8 Gigabit ports for fast server deployment to meet increasing network loads. The Gigabit Po E ports provide a larger bandwidth for high speed network applications, especially IEEE802.11n Access Points, high resolution video cameras, & phones. ...

The D-Links DGS-6600 series chassis-based switches are intelligent & high-performance multi-layer LAN devices designed for Enterprise local area networks (LAN). They are ideal for deployment in environments that require uninterrupted running of network applications & a high level of performance, security & control. Featuring a flexible modular architecture & industry standard compliance, these switches provide scalable expansion & a high level of investment protection for businesses to deploy Gigabit & 10-Gigabit packet switching & routing for office networking & Ethernet-based Internet services to homes. The DGS-6600 series is equipped with high-speed switch fabric, & advanced software functions, including complete IPv 6 support. These switches provide the performance, high availability & futureproof architecture suitable for applications of not just today, but those of the future. ...

DPS- 900 is an 8-slot standard rack-mount size chassis designed to accommodate up to 8 units of DPS-200 or DPS-500, or a combination of both. Using a DPS-900, you can deploy up to 8 redundant power supply units in a standard equipment rack to support a stack of 8 stackable D-Link switches mounted in the same rack. ...

DPS- 900 is an 8-slot standard rack-mount size chassis designed to accommodate up to 8 units of DPS-200 or DPS-500, or a combination of both. Using a DPS-900, you can deploy up to 8 redundant power supply units in a standard equipment rack to support a stack of 8 stackable D-Link switches mounted in the same rack. ...

D-Links DXS-3600 10 Gb E L2+ switch family consists of compact, high-performance switches that feature wire-speed 10-Gigabit Ethernet switching, routing, & very low latency. The 1U height & high performance switching make the DXS-3600 series suitable for top-of-rack (To R) deployment in data centers or enterprise & campus aggregation network environments. The DXS-3600 switches can feature more ports with the addition of an expansion module. The DXS-3600 switches deliver high-performance 10-Gigabit Ethernet switching capacity of up to 960 Gbps & forwarding rates of up to 714.28 Mpps. The switches feature hot- swappable power supplies & fan trays, which enable redundant, high availability architecture. Utilizing two power modules shares the load & helps to extend the lifetime of the power supplies. The DXS-3600 series also features a modular fan design. Three fans can back up each other, providing N+1 redundancy for the system. If one of the fans fails, the other fans will increase their speed by automatically detecting the system temperature ...

D-Link's DXS-3600 10 Gb E L2+ switch family consists of compact, high-performance switches that feature wire-speed 10-Gigabit Ethernet switching, routing, & very low latency. The 1U height & high performance switching make the DXS-3600 series suitable for top-of-rack (To R) deployment in data centers or enterprise & campus aggregation network environments. The DXS-3600 switches can feature more ports with the addition of an expansion module. The DXS-3600 switches deliver high-performance 10-Gigabit Ethernet switching capacity of up to 960 Gbps & forwarding rates of up to 714.28 Mpps. The switches feature hot- swappable power supplies & fan trays, which enable redundant, high availability architecture. Utilizing two power modules shares the load & helps to extend the lifetime of the power supplies. The DXS-3600 series also features a modular fan design. Three fans can back up each other, providing N+1 redundancy for the system. If one of the fans fails, the other fans will increase their speed by automatically detecting the system temperature ...

D-Links DES-105 & DES-108 Fast Ethernet switches provide a cost-effective way for small to medium sized businesses to create a small network & connect computers, wireless Access Points, IP cameras, network printers & other Ethernet devices quickly & easily without complicated configurations. These switches come with 5 or 8 Fast Ethernet ports with an auto-sensing function to detect the maximum speed of the connected devices, allowing you to run your network with the best possible performance. Their fanless design & solid metal housing makes them completely silent so they are ideal for offices, libraries or meeting rooms, & for industrial & hazardous environments like factories & warehouses. The DES-105 & DES-108 are designed with durability & performance in mind. Their sturdy metal housing will protect them against accidental harm, while helping to dissipate heat & to reduce stress on internal components. The visible LEDs allow for an easy reading of each port status, helping to troubleshoot connectivity problems. For a convenient placement, these switches come with a wall mounting kit & a slot for a Kensington security lock to protect them from theft. Despite being unmanaged, Plug & Play switches, the DES-105 & DES-108 are able to classify network traffic by assessing the 802.1p field in the Ethernet frames, & forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice & data traffic without delays or loss of quality. The DES-105 & DES108 are part of D-Link Green, D-Links eco-friendly technology, providing energy savings, reduced power consumption, & a longer product lifespan without sacrificing operational performance or functionality. These switches implement the 802.3az Energy Efficient Ethernet (EEE) standard, which can save a substantial amount of energy by detecting the port status, putting them in low-power, st&-by mode when no network traffic is detected. Th ...