The DUB-H7 is a 7-port Universal Serial Bus USB (Universal Serial Bus) 2.0 hub that means that you can connect up to 7 USB (Universal Serial Bus) 2.0 peripherals & devices to your USB (Universal Serial Bus) 2.0 ready PC or i Mac. Providing an out of the box industry standard bus, this pocket-sized device expands your PC & Mac by adding 7 USB (Universal Serial Bus) 2.0 ports to your system. A single Type B upstream port is provided to connect to the host computer, or another USB (Universal Serial Bus) hub. Configured directly by the operating system, the DUB-H7 operates seamlessly with both Microsoft's Open HCI, Intel's Universal HCI & USB (Universal Serial Bus) 2.0 new generation

Specification EHCI. As a standard USB (Universal Serial Bus) hub, it buffers USB (Universal Serial Bus) data from any attached peripherals or devices in compliance with USB (Universal Serial Bus)

Specification versions 1.1 & 2.0 to provide an invisible extension of the USB (Universal Serial Bus) bus. Supporting both low-speed 1.5 Mbps devices, full-speed 12 Mbps devices & high-speed 480 Mbps, each port creates a bridge between the peripheral & host computer.



...

The D-Link ANT24-0700 is a high-Gain omni-directional antenna designed for 2.4 G Hz ISM band indoor use. This antenna provides high transmission/reception rates for wireless LAN devices operating on the 2.4 G Hz public industrial, scientific & medical (ISM) frequency b&. It can be used with 802.11b & 802.11g wireless LAN devices such as access points & remote routers. This antenna can be used to replace the default antenna of your wireless device to expand its operation range. It can be connected to your wireless device through an extension cable (provided with the antenna), or directly attached to your wireless device. ...

This desktop switch offers an inexpensive alternative to fibre optics for the SOHO & small & medium business (SMB). Increasing network loads can be handled with the increased bandwidth of Gigabit Ethernet. ** Gigabit connectivity without fibre** The switch provides 8 Gigabit ports in the familiar Ethernet format, so it works seamlessly with existing network cables (Cat 5 or higher). Up to 2000 Mbps can be achieved in full-duplex mode, giving workstations bottleneck-free access to server data. ** Plug-&-Play installation** All there is to do is plug the cables into the switch. All ports support both straight-through & crossover cable types, eliminating the need for an uplink port. & with 10/100/1000 Mbps auto-sensing, no configuration is required. ** Think Green** By sensing whether attached devices are ON or OFF & estimating the cable length, the switch is able to adjust its power consumption, for a total saving of up to 40%*. * Figure based on a scenario assuming that PCs are used for 10 hours a day, powered off 14 hours a day & connected to the switch using 20m cables.
- Power-saving feature, up to 40%* less power consumption (dlink green version only)
- 8 Gigabit Ethernet ports
- Plug-&-play installation
- Desktop size, no fan



...

This desktop switch offers an inexpensive alternative to fibre optics for the SOHO & small & medium business (SMB). Increasing network loads can be handled with the increased bandwidth of Gigabit Ethernet. ** Gigabit connectivity without fibre** The switch provides 8 Gigabit ports in the familiar Ethernet format, so it works seamlessly with existing network cables (Cat 5 or higher). Up to 2000 Mbps can be achieved in full-duplex mode, giving workstations bottleneck-free access to server data. ** Plug-&-Play installation** All there is to do is plug the cables into the switch. All ports support both straight-through & crossover cable types, eliminating the need for an uplink port. & with 10/100/1000 Mbps auto-sensing, no configuration is required. ** Think Green** By sensing whether attached devices are ON or OFF & estimating the cable length, the switch is able to adjust its power consumption, for a total saving of up to 40%*. * Figure based on a scenario assuming that PCs are used for 10 hours a day, powered off 14 hours a day & connected to the switch using 20m cables.
- Power-saving feature, up to 40%* less power consumption (dlink green version only)
- 8 Gigabit Ethernet ports
- Plug-&-play installation
- Desktop size, no fan



...

This desktop switch offers an inexpensive alternative to fibre optics for the SOHO & small & medium business (SMB). Increasing network loads can be handled with the increased bandwidth of Gigabit Ethernet. ** Gigabit connectivity without fibre** The switch provides 8 Gigabit ports in the familiar Ethernet format, so it works seamlessly with existing network cables (Cat 5 or higher). Up to 2000 Mbps can be achieved in full-duplex mode, giving workstations bottleneck-free access to server data. ** Plug-&-Play installation** All there is to do is plug the cables into the switch. All ports support both straight-through & crossover cable types, eliminating the need for an uplink port. & with 10/100/1000 Mbps auto-sensing, no configuration is required. ** Think Green** By sensing whether attached devices are ON or OFF & estimating the cable length, the switch is able to adjust its power consumption, for a total saving of up to 40%*. * Figure based on a scenario assuming that PCs are used for 10 hours a day, powered off 14 hours a day & connected to the switch using 20m cables.
- Power-saving feature, up to 40%* less power consumption (dlink green version only)
- 8 Gigabit Ethernet ports
- Plug-&-play installation
- Desktop size, no fan



...

The DGS-1008P offers an economical way for SOHO & small to medium businesses (SMB) to benefit from the increased bandwidth of Gigabit Ethernet. It provides 8 Gigabit ports for fast server deployment to meet increasing network loads. The Gigabit Po E ports provide a larger bandwidth for high speed network applications, especially IEEE802.11n Access Points, high resolution video cameras, & phones. ...

The D-Links DGS-6600 series chassis-based switches are intelligent & high-performance multi-layer LAN devices designed for Enterprise local area networks (LAN). They are ideal for deployment in environments that require uninterrupted running of network applications & a high level of performance, security & control. Featuring a flexible modular architecture & industry standard compliance, these switches provide scalable expansion & a high level of investment protection for businesses to deploy Gigabit & 10-Gigabit packet switching & routing for office networking & Ethernet-based Internet services to homes. The DGS-6600 series is equipped with high-speed switch fabric, & advanced software functions, including complete IPv 6 support. These switches provide the performance, high availability & futureproof architecture suitable for applications of not just today, but those of the future. ...

The D-Link's DGS-6600 series chassis-based switches are intelligent & high-performance multi-layer LAN devices designed for Enterprise local area networks (LAN). They are ideal for deployment in environments that require uninterrupted running of network applications & a high level of performance, security & control. Featuring a flexible modular architecture & industry standard compliance, these switches provide scalable expansion & a high level of investment protection for businesses to deploy Gigabit & 10-Gigabit packet switching & routing for office networking & Ethernet-based Internet services to homes. The DGS-6600 series is equipped with high-speed switch fabric, & advanced software functions, including complete IPv 6 support. These switches provide the performance, high availability & futureproof architecture suitable for applications of not just today, but those of the future. ...

DPS- 900 is an 8-slot standard rack-mount size chassis designed to accommodate up to 8 units of DPS-200 or DPS-500, or a combination of both. Using a DPS-900, you can deploy up to 8 redundant power supply units in a standard equipment rack to support a stack of 8 stackable D-Link switches mounted in the same rack. ...

DPS- 900 is an 8-slot standard rack-mount size chassis designed to accommodate up to 8 units of DPS-200 or DPS-500, or a combination of both. Using a DPS-900, you can deploy up to 8 redundant power supply units in a standard equipment rack to support a stack of 8 stackable D-Link switches mounted in the same rack. ...