The D-Link XFP module provides high-speed 10-Gigabit connection on the secure fiber cable. It provides a single or dual XFP slots & can be slid into an open slot of a D-Link Gigabit switch. A number of 10 Gigabit transceivers are available for selection for installation in the XFP slot. Data transfer is operated in the full-duplex mode at 20 Gigabits per second on either the multi-mode or single-mode fiber network cable, depending on the type of transceiver being installed. The D-Link XFP module allows flexible deployment of 10-Gigabitconnection & is ideal for bandwidth-hungry applications that can meet greater cable distances & low signal interference requirements in the Local Area Network, Wide Area Network & Metropolitan Area Network. ...

D-Links 10-port Third Generation Gigabit Smart Po E Switch is designed to provide small to medium businesses complete control over their network. In a 13" metal case with innovative fanless design, the switch incorporates a complete lineup of Layer 2 features, including Port Mirroring, Spanning Tree, Link Aggregation & IGMP Snooping. Network maintenance features include Loopback Detection & Cable Diagnostics. Eight of the 10 switch ports include Power over Ethernet (Po E), which gives administrators the ability to connect 802.3at pre-standard equipment such as 802.11n wireless Access Points, in parallel with standard 802.3af equipment. The Po E function is programmable, so you can cut your energy bill by switching the power off at certain times. The DGS-1210-10P features state-of-the-art security technologies including ACL filtering & 802.1X authentication. With D-Link Safeguard Engine, the switch remains available in the event of a virus outbreak. Furthermore, the DGS-1210-10P uses Auto Voice VLAN, ensuring higher priority for voice traffic. Quality of Service (Qo S) & granular bandwidth control down to 64 kbps are also included. A characteristic of D-Links web Smart Switches is their ease of use, via a simple web browser. Advanced users can also configure the switch via Telnet or SNMP package such as D-Links D-View 6.0. D-Links Smart Console utility is also included for the joint management of several switches. The DGS-1210-10P is D-Link Green certified, for the energy savings that it provides without sacrificing operational performance or functionality. ...

D-Link's 10-port Third Generation Gigabit Smart Po E Switch is designed to provide small to medium businesses complete control over their network. In a 13" metal case with innovative fanless design, the switch incorporates a complete lineup of Layer 2 features, including Port Mirroring, Spanning Tree, Link Aggregation & IGMP Snooping. Network maintenance features include Loopback Detection & Cable Diagnostics. Eight of the 10 switch ports include Power over Ethernet (Po E), which gives administrators the ability to connect 802.3at pre-standard equipment such as 802.11n wireless Access Points, in parallel with standard 802.3af equipment. The Po E function is programmable, so you can cut your energy bill by switching the power off at certain times. The DGS-1210-10P features state-of-the-art security technologies including ACL filtering & 802.1X authentication. With D-Link Safeguard Engine, the switch remains available in the event of a virus outbreak. Furthermore, the DGS-1210-10P uses Auto Voice VLAN, ensuring higher priority for voice traffic. Quality of Service (Qo S) & granular bandwidth control down to 64 kbps are also included. A characteristic of D-Link's web Smart Switches is their ease of use, via a simple web browser. Advanced users can also configure the switch via Telnet or SNMP package such as D-Link's D-View 6.0. D-Link's Smart Console utility is also included for the joint management of several switches. The DGS-1210-10P is D-Link Green certified, for the energy savings that it provides without sacrificing operational performance or functionality. ...

The DGS-1210-10/10P/20/28 features a fanless design that allows for quieter operation & helps to extend the device's lifetime. While the DGS-1210-28P/52/52P feature a smart fan design that powers on after the switch reaches a certain temperature, saving energy & cutting costs without sacrificing performance. ...

D-Link's DGS-1100 Series provide an affordable solution for SOHOs & Small & Medium Businesses as well as enterprise deployment, such as in branch offices & meeting rooms that require simple network management. Most models comes in a compact desktop-sized metal case & features a wide selection of Gigabit port configurations with optional Gigabit fiber uplink ports. There are 4 switches in the series supporting Power-over-Ethernet with 2 of the switches in the offering high-power-budget Po E for businesses looking to power Vo IP phones, wireless access points or network cameras. ...

This card provides a cost-effective way to connect your desktop PC & MAC to a Fast Ethernet network. The card plugs into a PCI expansion slot inside your computer, transmits data at 10 Mbps or 100 Mbps, supports full/half duplex data transfer. It runs Windows 95, 98, 2000, ME, NT, XP & a host of other operating systems to let you access databases, send files & e-mail, share printers & other peripherals across an office or school. ...

Small & medium businesses face an ever-increasing need for data consolidation & document sharing. The D-Link Share Center™ Pro 1200 NAS addresses these growing data storage requirements, & provides a multitude of additional options for managing & securing important files. ** File Sharing** Share Center™ Pro 1200 integrates a NAS file server which takes full advantage of the accelerated performance provided by i SCSI. Files can be shared across the network or over the Internet via FTP or an intuitive web file manager, to users with the appropriate credentials. **NAS File Server** Small Businesses will appreciate the DNS-1200-05 NAS file server which takes advantage of the accelerated performance of the quad-core CPU. Providing up to 7200 MIPS of computing power & 1GB of cache memory, the DNS-1200-05 is able to provide the performance required for your business & its future growth. **A Variety of Backup Options** Share Center™ Pro 1200 offers several backup options which allow administrators & users to control how, when, & where their data is stored. Remote backup will keep a copy of your files on a remote NAS over the Internet for extra data protection, & volume snapshots can backup a whole volume in a few minutes in contrast with traditional backup schemes that can take hours. **i SCSI for IP Networks** i SCSI offers exceptionally fast access performance thanks to block-level data transfer. i SCSI targets appear as a local drive on a client PC. Operations such as configuration, provisioning, & backup can be handled by the administrator in the same way they would be for directly attached storage. By utilising existing Ethernet technology, the cost associated with separate host bus adapters & the per-Gigabyte cost for storage can be significantly reduced. ** Advanced Security** Account management features include the ability to manage users/groups & Read/ Write permissions. Create users, groups, & i SCSI targets with passwo ...

D-Links DSN-6000 Series i SCSI SAN array is a fully redundant, data center-class network storage solution in a 2U rackmount form factor. The DSN-6000 Series currently supports 36TB of raw capacity using 3TB drives (and even greater capacity as larger disk drives become available), & overall scalability to 180TB using DSN-6020 Expansion Enclosure. D-Links DSN-6000 Series provides 1GE or 10GE host interface connectivity which can handle over 200, 000 I/O per second. The DSN-6000 Series integrates x Stack storage architecture & supports services for applications demanding high throughput, scalability & flexible storage planning. The DSN-6000 Series can be easily implemented as primary storage, as secondary storage to supplement an existing infrastructure, or as a nearline storage device to improve backup & recovery times. Using the intuitive & integrated management GUI, the DSN-6000 Series Arrays can be seamlessly incorporated in both Physical & Virtual Server environments. The DSN-6000 Series can provide the failover & redundancy capabilities required for mission critical scenarios such as Virtual Machine (VM) shares, database hosting, Online Transactional Processing (OLTP), email applications, storage consolidation & other primary storage needs. It is equipped with fully redundant components for all major functions, such as RAID controllers, power supplies, fan modules, battery backup modules, & SAS JBOD expansion ports. The Hot-pluggable design is capable of providing uninterrupted services. In addition, the DSN-6000 Series incorporates advanced high availability features such as RAID 6 & RAID 60 support, writable snapshot, Microsoft Windows VSS support, & volume configuration restoration. These advanced features help to reduce or eliminate any system downtime. Unlike other vendors, D-Links DSN-6000 Series is able to upgrade to firmware without the system going offline. Both firmware image & volume handling are well protected by the redund ...

D-Link's DSN-6000 Series i SCSI SAN array is a fully redundant, data center-class network storage solution in a 2U rackmount form factor. The DSN-6000 Series currently supports 36TB of raw capacity using 3TB drives (and even greater capacity as larger disk drives become available), & overall scalability to 180TB using DSN-6020 Expansion Enclosure. D-Link's DSN-6000 Series provides 1GE or 10GE host interface connectivity which can handle over 200, 000 I/O per second. The DSN-6000 Series integrates x Stack storage architecture & supports services for applications demanding high throughput, scalability & flexible storage planning. The DSN-6000 Series can be easily implemented as primary storage, as secondary storage to supplement an existing infrastructure, or as a nearline storage device to improve backup & recovery times. Using the intuitive & integrated management GUI, the DSN-6000 Series Arrays can be seamlessly incorporated in both Physical & Virtual Server environments. The DSN-6000 Series can provide the failover & redundancy capabilities required for mission critical scenarios such as Virtual Machine (VM) shares, database hosting, Online Transactional Processing (OLTP), email applications, storage consolidation & other primary storage needs. It is equipped with fully redundant components for all major functions, such as RAID controllers, power supplies, fan modules, battery backup modules, & SAS JBOD expansion ports. The Hot-pluggable design is capable of providing uninterrupted services. In addition, the DSN-6000 Series incorporates advanced high availability features such as RAID 6 & RAID 60 support, writable snapshot, Microsoft Windows VSS support, & volume configuration restoration. These advanced features help to reduce or eliminate any system downtime. Unlike other vendors, D-Link's DSN-6000 Series is able to upgrade to firmware without the system going offline. Both firmware image & volume handling are well protected by the redund ...

With 12 SFP slots, the DGS-3612G provides a full fibre environment for long distance Ethernet infrastructure. It is particularly suitable for ISPs in their Metropolitan Area Network (MAN) deployments. In addition, four 1000 Base-T copper ports acting as combo with 4 of the SFP slots are included for flexibility. With D-Link Single IP Management (SIM) technology, up to 32 switch units -regardless of the model- may be combined in a virtual stack. Multiple switches can be configured, monitored & maintained from any workstation running a web browser via a single IP address. The stack is managed as a single object, as all stacked units are identified by this single IP address. A simple yet powerful web-based interface allows the administrator to perform most management & configuration tasks. The DGS-3612G

Includes:: advanced routing features, such as OSPF v 2, Passive Interface, Not-So-Stubby Area (NSSA), Equal Cost Route & RIP. Multicast services such as IP-TV & Video on Demand (Vo D) are supported with the inclusion of protocols such as IGMP, MLD & PIM. With Double VLAN (802.1Q-in-Q) support, ISPs can create Layer 2 Virtual Private Networks (VPNs) & transparent LANs for their customers. A complete set of security features is provided for connectivity & access control. These include Access Control Lists (ACLs) based on MAC address, switch port, IP address and/or TCP/UDP port numbers. 802.1X Authentication & MAC address control functionality is furthermore featured. The switch also provides central management for administration access via TACACS/TACACS+ & RADIUS. In addition, when implemented in conjunction with a D-Link Net Defend firewall, this switch is able to automatically quarantine any host displaying abnormal behaviour. This mechanism, D-Links Zone Defense, provides proactive network security by preventing viruses from spreading through the network & thwarting harmful network attacks. The DGS-3612G switch provides VLAN support including G

...