20 Pack Lateral Elbow Connector White UL Approved. This 20-pack of raceway lateral elbows work with the Star Tech.com CBMWD3816 raceway system. Join Two Raceways Together & Run them up the Wall at a 90 Degree Angle Use these cable raceway lateral elbows with the Star Tech.com CBMWD3816 raceway to join two of them together at a 90 degree angle to extend the length of your raceway up walls in your office or server room. Industrial Strength Made from sturdy self-extinguishing ABS that's also warp proof, these wiring duct elbow connectors are UL approved with 94HB Flamability (Horizontal Burning) Rating. Use in Combination with Other Raceway Accessories Combine this lateral elbow with other Star Tech.com CBMWD3816 raceway system accessories to give your cable management solution a finished look. The Coupler (CBMWD3816C) (20-Pack), joins two raceways together & extends the length of your raceway. The End Piece (CBMWD3816E) (20-Pack), cleanly caps off the end of your raceway. The Inside Elbow (CBMWD3816I) (20-Pack), joins two raceways together inside of corners at a 90 degree angle. The Outside Elbow (CBMWD3816O) (20-Pack), joins two raceways together around corners at a 90 degree angle. The T Connector (CBMWD3816T) (20-Pack), joins three raceways together in T-bar. These cable management raceway lateral elbows are TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years. ...

20 Pack Outside Elbow Connector White UL Approved. This 20-pack of raceway outside elbows works with the Star Tech.com CBMWD3816 raceway system. Join Two Raceways Together Around Corners at a 90 Degree Angle Use these cable raceway outside elbows with the Star Tech.com CBMWD3816 raceway to join two of them together & run them around corners at a 90 degree angle in your office or server room. Industrial Strength Made from sturdy self-extinguishing ABS that's also warp proof, these wiring duct connectors are UL approved with 94HB Flamability (Horizontal Burning) Rating. Use in Combination with Other Raceway Accessories Combine this coupler with other Star Tech.com CBMWD3816 raceway system accessories to give your cable management solution a finished look. The Coupler (CBMWD3816C) (20-Pack), joins two raceways together & extends the length of your raceway. The End Piece (CBMWD3816E) (20-Pack), cleanly caps off the end of your raceway. The Inside Elbow (CBMWD3816I), joins two raceways together inside of corners at 90 degree angle. The Lateral Elbow (CBMWD3816L), joins two raceways together & runs them up the wall at a 90 degree angle. The T Connector (CBMWD3816T), joins three raceways together in T-bar. These cable management raceway outside elbows are TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years. ...

20 Pack Outside T Connector White UL Approved. This 20-pack of raceway T-bars works with the Star Tech.com CBMWD3816 raceway system. T-Branch Three Raceways Together at 90 Degree Angles Use these cable raceway T-bars with the Star Tech.com CBMWD3816 raceway to join three of them together & make a right-angle T-branch in your office or server room. Industrial Strength Made from sturdy self-extinguishing ABS that's also warp proof, these wiring duct connectors are UL approved with 94HB Flamability (Horizontal Burning) Rating. Use in Combination with Other Raceway Accessories Combine this coupler with other Star Tech.com CBMWD3816 raceway system accessories to give your cable management solution a finished look. The Coupler (CBMWD3816C) (20-Pack), joins two raceways together & extends the length of your raceway. The End Piece (CBMWD3816E) (20-Pack), cleanly caps off the end of your raceway. The Inside Elbow (CBMWD3816I), joins two raceways together inside of corners at 90 degree angle. The Lateral Elbow (CBMWD3816L), joins two raceways together & runs them up the wall at a 90 degree angle. The Outside Elbow (CBMWD3816O) (20-Pack), joins two raceways together around corners at a 90 degree angle These cable management raceway outside elbows are TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years. ...

78 in. (2 m) Self-Extinguishing PVC M1 Rated NF Fire Resistant. This 78 in. (2 m) cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy & professional look. Professionally Organize & Route Cables This cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 0.63 in. (16 mm) x 1.49 in. (38 mm). Industrial Strength Made from self extinguishing PVC, that's sturdy & warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point & are UL/94V-0 Rated. Hassle-Free Installation The cable raceway can be mounting by simply drilling holes through housing & into any surface, or double sided tape can used to secure the raceway (screws & tape not included). Give Your Raceway a Finished Look with these Accessories To combine & route this cable management raceway & cap off the ends, Star Tech.com offers a wide selection raceway accessories. The Coupler (CBMWD3816C) (20-Pack), joins two raceways together & extends the length of your raceway. The End Piece (CBMWD3816E) (20-Pack), cleanly caps off the end of your raceway. The Inside Elbow (CBMWD3816I) (20-Pack), joins two raceways together inside of corners at a 90 degree angle. The Lateral Elbow (CBMWD3816L) (20-Pack), joins two raceways together & runs them up the wall at a 90 degree angle. The Outside Elbow (CBMWD3816O) (20-Pack), joins two raceways together around corners at a 90 degree angle. The T Connector (CBMWD3816T) (20 Pack), joins three raceways together in a T-bar. This cable management raceway is TAA compliant & backed by a Star Tech.com Lifetime warranty & free 24/5 technical support. Star Tech.com has been the IT professionals choice for over 30 years. ...

Replace, or keep a spare 5V DC (2 A) KVM switch power adapter on h&. The SVUSBPOWERUK 5V DC UK power adapter is a suitable replacement/spare for your SV231USB or SV431USB KVM switch. ...

Keep spare hard drive trays handy for the DRW110SATBK Mobile Rack. This spare/extra SATA hard drive caddy/drive tray can be used with Star Tech.com's 5.25in SATA Hard Drive Mobile Rack Drawer (DRW110SATBK) allowing you to hot swap an additional SATA hard drive, swap operating systems, make high speed, high capacity backups or provide individual hard drives for multiple users. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. ...

Keep spare hard drive trays handy for the DRW110SATBK Mobile Rack. This spare/extra SATA hard drive caddy/drive tray can be used with Star Tech.com's 5.25in SATA Hard Drive Mobile Rack Drawer (DRW110SATBK) allowing you to hot swap an additional SATA hard drive, swap operating systems, make high speed, high capacity backups or provide individual hard drives for multiple users. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. ...

The SPDIF2AA Toslink/optical SPDIF to RCA audio converter lets you convert a 2-channel digital coaxial or Toslink/optical SPDIF input signal into an RCA analog stereo output. Perfect for home & professional audio applications, this SPDIF to RCA audio converter saves the cost of upgrading equipment for compatible connections, & offers separate digital coax & Toslink inputs for dual-function conversion. The small form factor design makes it suitable for installation into virtually any location, regardless of space constraints, while still providing a lossless audio signal. Plus, the digital coaxial or Toslink to RCA converter supports Plug & Play installation, saving you time & hassle. ...

Convert a Digital Coax or Toslink Signal to Stereo RCA Audio. The SPDIF2AA Toslink/ Optical SPDIF to RCA Audio Converter lets you convert a 2-channel Digital Coaxial or Toslink/ Optical SPDIF input signal into an RCA analog stereo output. Perfect for home & professional audio applications, this SPDIF to RCA audio converter saves the cost of upgrading equipment for compatible connections, & offers separate Digital Coax & Toslink inputs for dual-function conversion. The small form factor design makes it suitable for installation into virtually any location, regardless of space constraints, while still providing a lossless audio signal. Plus, the digital coaxial or Toslink to RCA converter supports plug-&-play installation, saving you time & hassle. ...

Add the speed, reliability, & security of a Fiber Ethernet connection to a PCI compatible PC! The PCI100MMST 100 Mbps Fiber Optic (MM ST) PCI Ethernet NIC offers the perfect " Fiber-to-the-desk" solution, enabling you to connect a computer directly to a fiber network. The PCI Fiber Ethernet adapter card is easy to install & is perfectly suited for high bandwidth applications with support for Full Duplex operation & 10/100 Mbps transfer speeds. ...