Have you ever wanted to use more than one removable hard drive with your system, but don't want to waste space by installing an extra bay? A complement to the Star Tech.com DRW110ATABK, the DRW110CADBK is perfect for using multiple removable drives on the same system. With this removable caddy, you can swap operating systems, make high speed, high capacity backups or provide individual hard drives for multiple users. The caddy features the same protective shock absorption system as the DRW110ATABK & is constructed of durable lightweight plastic for easy portability. This caddy is Plug & Play compatible with the DRW110ATABK, making it a snap to use multiple removable drives in the same system without wasting valuable bay space. ...

Keep spare hard drive trays handy for the DRW110SATBK Mobile Rack. This spare/extra SATA hard drive caddy/drive tray can be used with Star Tech.com's 5.25in SATA Hard Drive Mobile Rack Drawer (DRW110SATBK) allowing you to hot swap an additional SATA hard drive, swap operating systems, make high speed, high capacity backups or provide individual hard drives for multiple users. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. ...

Keep spare hard drive trays handy for the DRW110SATBK Mobile Rack. This spare/extra SATA hard drive caddy/drive tray can be used with Star Tech.com's 5.25in SATA Hard Drive Mobile Rack Drawer (DRW110SATBK) allowing you to hot swap an additional SATA hard drive, swap operating systems, make high speed, high capacity backups or provide individual hard drives for multiple users. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. ...

The SPDIF2AA Toslink/optical SPDIF to RCA audio converter lets you convert a 2-channel digital coaxial or Toslink/optical SPDIF input signal into an RCA analog stereo output. Perfect for home & professional audio applications, this SPDIF to RCA audio converter saves the cost of upgrading equipment for compatible connections, & offers separate digital coax & Toslink inputs for dual-function conversion. The small form factor design makes it suitable for installation into virtually any location, regardless of space constraints, while still providing a lossless audio signal. Plus, the digital coaxial or Toslink to RCA converter supports Plug & Play installation, saving you time & hassle. ...

Convert a Digital Coax or Toslink Signal to Stereo RCA Audio. The SPDIF2AA Toslink/ Optical SPDIF to RCA Audio Converter lets you convert a 2-channel Digital Coaxial or Toslink/ Optical SPDIF input signal into an RCA analog stereo output. Perfect for home & professional audio applications, this SPDIF to RCA audio converter saves the cost of upgrading equipment for compatible connections, & offers separate Digital Coax & Toslink inputs for dual-function conversion. The small form factor design makes it suitable for installation into virtually any location, regardless of space constraints, while still providing a lossless audio signal. Plus, the digital coaxial or Toslink to RCA converter supports plug-&-play installation, saving you time & hassle. ...

Turn your HDBase T extender into a scalable distribution system, by delivering HDMI content to additional locations. This HDBase T repeater lets you add another HDMI display to your existing ST121HDBTE or ST121HDBTPW HDBase T extender kit. This makes it easy to expand your digital signage system to meet the growing needs of your business. The repeater receives the HDBase T signal from your transmitter & deploys it to the receiver up to 70 m away while outputting the HDBase T signal to an HDMI display at the repeater's location. The repeater also enables you to add an HDMI source at the repeater's location & switch between sources at each of your connected HDMI or HDBase T displays. The repeater connects between your existing HDBase T transmitter & receiver, enabling you to connect an HDMI display to the repeater, then daisy-chain the HDBase T signal to an additional location up to 230 ft. (70 m) away. The repeater also features an HDMI input that lets you connect a different HDMI video source at the repeater & then switch between which source is output to the receiver. For additional flexibility, you can add up to three HDBase T repeaters to an ST121HDBTE or ST121HDBTPW extender kit. Using multiple repeaters (sold separately) you can run an HDBase T signal to a total of four locations, which provides the ideal solution for routing digital signage through large buildings such as shopping centers, stadiums, schools, or hospitals. The HDBase T repeater

Includes:: hardware for mounting it out of sight on a wall or in an equipment rack. This helps to reduce clutter & ensures a professional installation that doesn't draw your viewers' attention away from the content on your display
- perfect for customer facing displays in bars or restaurants. With the A/V industry quickly adopting 4K as the new high-resolution video standard, long-range video distribution can be difficult, given the distance limitations of standard HDMI cables. With support for 4K, you'll be


...

This 4K HDMI over IP receiver works with the 4K HDMI over IP Extender Kit (sold separately) & lets you extend a 4K HDMI signal, as well as RS-232 peripheral device connections, over your network. You can use additional receivers (sold separately) to distribute the HDMI signal to multiple locations, each with 4K support, & combine your remote displays to create a video wall. The IP receiver also features RS-232 extension which enables you to add a remote serial operated device at your video source or each remote display. This HDMI over IP extender is the perfect solution for combining a serial-operated touchscreen with your display or video wall, to create interactive digital signage presentations. You can add multiple receivers to your HDMI over IP extender kit to create a point-to-multipoint setup or video wall. In these configurations, you can also add additional sources (transmitters) with even more displays (receivers) over your Gigabit Ethernet switch with IGMP. For further scalability, you can combine up to 16 total (transmitters) & as many receivers (displays) as your network bandwidth can support. The extender also features a separate 3.5 mm audio source that enables you to switch between the native HDMI audio & a separate 3.5 mm audio source, so you can distribute a single audio source to multiple remote locations over IP (also requires a Gigabit Ethernet switch with IGMP). This HDMI over IP kit uses H.264 compression to deliver astonishing 4K UHD video to your remote 4K displays over an IP connection. With support for 4K, you can achieve an output resolution of up to 3840 x 2160p at 30 Hz, which enables you to extend a 4K video source to multiple remote locations
- perfect for digital signage or entertainment video distribution throughout large buildings such as schools, hospitals, shopping centers or areas. The extender is backward compatible with lower resolutions such as 1080p or 720p, making it great for lower resolution applicati
...

Clone or erase 2.5in/3.5in SATA hard drives, without a host computer connection. The SATDUP13 standalone HDD duplicator/eraser lets you copy up to three, or erase up to four SATA HDDs or SSDs simultaneously, without having to connect to a host computer. The duplicator/eraser works with any 3.5" or 2.5" SATA Hard Drive or Solid State Drive, & features an integrated LCD that makes it easy to monitor cloning/erasing performance. The versatile 1-to-3 duplicator features three operating modes for duplication, including Data Only, All Partitions, & Sector by Sector cloning, & delivers high-performance duplication speeds to help save you time (tested for speeds up to 14GB per minute). The SATDUP13 also offers several erase modes, including Quick Erase, Secure Erase, & Single-Pass/ Multi-Pass Hard Drive Overwriting (Do D), which passes over the hard drive 3 times to ensure that the data has been completely wiped. For increased scalability, the HDD duplicator/eraser features a unique daisy-chain port that gives you the option to combine multiple SATDUP13 units together, allowing up to four additional drives to be erased or copied with each added unit to help save you time. ...

Clone or erase 2.5in/3.5in SATA hard drives, without a host computer connection. The SATDUP13 standalone HDD duplicator/eraser lets you copy up to three, or erase up to four SATA HDDs or SSDs simultaneously, without having to connect to a host computer. The duplicator/eraser works with any 3.5" or 2.5" SATA Hard Drive or Solid State Drive, & features an integrated LCD that makes it easy to monitor cloning/erasing performance. The versatile 1-to-3 duplicator features three operating modes for duplication, including Data Only, All Partitions, & Sector by Sector cloning, & delivers high-performance duplication speeds to help save you time (tested for speeds up to 14GB per minute). The SATDUP13 also offers several erase modes, including Quick Erase, Secure Erase, & Single-Pass/ Multi-Pass Hard Drive Overwriting (Do D), which passes over the hard drive 3 times to ensure that the data has been completely wiped. For increased scalability, the HDD duplicator/eraser features a unique daisy-chain port that gives you the option to combine multiple SATDUP13 units together, allowing up to four additional drives to be erased or copied with each added unit to help save you time. ...

Easily duplicate or securely erase up to five USB (Universal Serial Bus) 2.0 Flash Drives simultaneously, without connecting to a computer. The USBDUP15 Oneto Five USB (Universal Serial Bus) flash drive duplicator & eraser lets you quickly clone up to five backups of a single USB (Universal Serial Bus) flash drive, or securely erase up to six flash drives, without connecting the to a host computer. Featuring a compact lightweight design that you can carry anywhere, & standalone operation that does not require a host computer, the flash drive duplicator & eraser has a small desktop footprint & is great for travel. Perfect for software & marketing content distribution in the office or on-the-go. With an easy-to-read LCD display & intuitive four button menu operation, the USBDUP15 ensures hassle-free setup & control. The menu gives you push-button access to many value-added features that ensure simple task management such as: Capacity & Speed Check, Copy & Compare, Asynchronous Copy, & many more. It also provides numerous advanced setup options for experienced users. This versatile device is both hard drive cloner & eraser in one, & offers two duplication modes (File & System Copy / Whole Copy) with up to 1.5GB/m at Whole Copy mode. It offers three erase modes (Quick Erase / Full Erase / Do D Erase) giving you the freedom to choose the best solution for your application. The USBDUP15 flash drive duplicator supports copying/cloning to SD/ SDHC/ Micro SD/ MMC/ Mini SD/ CF media through a USB (Universal Serial Bus) multimedia card reader (sold separately) & to Hard Drives or Solid State Drives through a hard drive docking station or USB (Universal Serial Bus) enclosure (sold separately) ...