This 8 Port transmitter unit is designed for use with Star Tech.coms ST121 VGA Video over Cat 5 extension series. This convenient video distribution system simplifies implementing digital signage solutions by allowing a single VGA source to be broadcast to multiple displays at up to 492 ft. (150m) away. Comprised of an 8 port VGA extender unit (this device
- ST1218T) or a 4 port VGA extender unit (ST1214T) & one ST121R Receiver Unit per display as necessary, the VGA & Audio extension series can transmit a single VGA output & corresponding audio to four or eight displays/receivers over standard Cat 5 UTP cable. For even more versatility, the VGA over Cat 5 Repeater (ST121EXT) can be used to increase the total VGA extension distance by an additional 492 ft., allowing the VGA signal to be broadcast at a total distance of 984 ft. from transmitter to receiver. Similarly, up to three repeater units can be used between the transmitter & receiver units allowing monitors to be connected between the two units, while still extending the total distance between the transmitter & receiver units.
...

Add four RS232 & four RS422/485 serial ports to your standard or low profile system through a PCIe slot. The PEX8S232485 8-Port PCIe Serial Combo Card lets you add four RS232 & four RS422 / RS485 serial ports to your PC through a single PCI Express expansion slot. This multi-port serial card is a single card solution that offers compatibility with nearly any serial communication protocol, supporting RS-232, RS-422, RS-485 2-wire or RS-485 4-wire operating modes at data rates up to 460 Kbps. To fit most standard computer cases, the card ships with a standard profile bracket installed &

Includes:: a low-profile / half-height bracket for adapting to slimline or small form factor systems. Plus, the included breakout cable helps to avoid cluttered connections.

...

Wall-mount your server or networking equipment sideways, for easy access. The RK819SIDEM Side-mounted Wallmount Open Frame Rack/ Cabinet is an 8U server rack that lets you mount your (19-inch wide) servers, A/V or network equipment facing perpendicular to the wall, for easy access to mounted devices & equipment. The cabinet/rack features open access to both the front & back of your devices, making it easy to adjust cabling, view LEDs & access configuration buttons as needed. Plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks, without causing an obstruction. Constructed of high-quality SPCC cold-rolled steel, for strength & durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...

Wall-mount your server or networking equipment sideways, for easy access. The RK819SIDEM Side-mounted Wallmount Open Frame Rack/ Cabinet is an 8U server rack that lets you mount your (19-inch wide) servers, A/V or network equipment facing perpendicular to the wall, for easy access to mounted devices & equipment. The cabinet/rack features open access to both the front & back of your devices, making it easy to adjust cabling, view LEDs & access configuration buttons as needed. Plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks, without causing an obstruction. Constructed of high-quality SPCC cold-rolled steel, for strength & durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...

Mount your server & networking equipment to the wall, with side mounting for hassle-free access to rear cabling. The RK819SIDEM Side-mounted Wallmount Open Frame Rack/ Cabinet is an 8U server rack that lets you mount your (19-inch wide) servers, A/V or network equipment facing perpendicular to the wall, for easy access to mounted devices & equipment. The cabinet/rack features open access to both the front & back of your devices, making it easy to adjust cabling, view LEDs & access configuration buttons as needed. Plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks, without causing an obstruction. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. Constructed of high-quality SPCC cold-rolled steel, for strength & durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...

Wall-mount your server or networking equipment with a hinged rack design for easy access & maintenance. The RK819WALLOH 8U 22in Depth Hinged Open Frame Wall Mount Server Rack lets you wall mount your (19-inch wide) servers, A/V or network equipment & features a hinged rack design that allows the entire frame to swing open for easy installation & maintenance of your equipment. The 8U wallmount rack offers a 4 post design for additional support of your equipment, storing a maximum weight capacity of 63kg (140 lbs). Constructed of high-quality SPCC cold-rolled steel for strength & durability, the open frame wallmount server rack allows for maximum airflow, & ships complete with all of the rack screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...

Wall-mount your server or networking equipment with a hinged rack design for easy access & maintenance. The RK819WALLOH 8U 22in Depth Hinged Open Frame Wall Mount Server Rack lets you wall mount your (19-inch wide) servers, A/V or network equipment & features a hinged rack design that allows the entire frame to swing open for easy installation & maintenance of your equipment. The 8U wallmount rack offers a 4 post design for additional support of your equipment, storing a maximum weight capacity of 63kg (140 lbs). Constructed of high-quality SPCC cold-rolled steel for strength & durability, the open frame wallmount server rack allows for maximum airflow, & ships complete with all of the rack screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...

This 8U Open Frame Wall Mount Equipment Rack is a high quality, low cost relay rack that is easy to assemble & install into any environment. The rack can be wallmounted or installed as a free standing storage solution. Able to accommodate common data, audio-video & telecom equipment, the open rack offers a depth of 12in; the wall mounts are positioned 16in apart (center to center), making it suitable for mounting on virtually any wall surface, based on North American wall frame stud spacing standards. ...

The RK812WALLOA 8U Open Frame Wall Mount Equipment Rack with Adjustable Depth is a high-quality, sturdy relay rack solution that is easy to assemble & install into any environment. The open rack features an adjustable depth ranging from 12-20 inches, in order to accommodate larger data, network & telecommunications devices. The greater than average depth of the rack also allows for mounting of shelves & other accessories. The wall mounts are positioned 16in apart (center to center), making it suitable for mounting on virtually any wall surface, based on North American wall frame stud spacing standards. This 8U rack can be mounted to the wall in a server room, office, or above a doorway, expanding your workspace & keeping your equipment easily accessible. ...

Computer Equipment Rack Casters Leveling Feet Cable Management Hooks. The 8U open frame rack lets you store your servers, network & telecommunications equipment in a sturdy, adjustable depth open-frame rack. Easy to Assemble Designed with ease of use in mind, this 8U 4 post rack offers easy-to-read markings for both rack units (U) & depth, with a wide range of mounting depth adjustments (22
- 40 in.) that make it easy to adapt the adjustable server rack to fit your equipment. Durable  Design This durable free standing server rack supports a static loading capacity of up to 1200 lb.  (544 kg) & portable rolling weight capacity of 660 lb.  (300 kg). The rack also features offers compliance with the EIA/ECA-310 standard for a universal design that's compatible with most network equipment rack equipment. For a complete server storage solution that saves you time & hassle, the mobile server rack 
Includes: optional accessories such as casters, leveling feet & cable management hooks. The base is also pre-drilled for securely fastening the rack to the floor if needed, providing you with additional stability while free standing. The Choice of IT Pros Since 1985 Star Tech.com conducts thorough compatibility & performance testing on all our products to ensure we are meeting or exceeding industry standards & providing high-quality products to IT Professionals. Our local Star Tech.com Technical Advisors have broad product expertise & work directly with our Star Tech.com Engineers to provide support for our customers both pre and post-sales. Backed by a Star Tech.com 2-year warranty & free lifetime technical support.

...