More From Contributor

£11.98
This DMS 59 to dual VGA Y cable means that you can break out one LFH 59 or LFH 60 (DMS 59 & DMS 60) connection on Matrox Qid, n Vidia Quadro, & PNY Quadro graphics cards into two high density DB15 female connectors, letting you connect two VGA monitors for a cost-effective dual display solution. ...
Available
£166.38
This 8 Port transmitter unit is designed for use with Star Tech.coms ST121 VGA Video over Cat 5 extension series. This convenient video distribution system simplifies implementing digital signage solutions by allowing a single VGA source to be broadcast to multiple displays at up to 492 ft. (150m) away. Comprised of an 8 port VGA extender unit (this device
- ST1218T) or a 4 port VGA extender unit (ST1214T) & one ST121R Receiver Unit per display as necessary, the VGA & Audio extension series can transmit a single VGA output & corresponding audio to four or eight displays/receivers over standard Cat 5 UTP cable. For even more versatility, the VGA over Cat 5 Repeater (ST121EXT) can be used to increase the total VGA extension distance by an additional 492 ft., allowing the VGA signal to be broadcast at a total distance of 984 ft. from transmitter to receiver. Similarly, up to three repeater units can be used between the transmitter & receiver units allowing monitors to be connected between the two units, while still extending the total distance between the transmitter & receiver units.
...
Available
£166.45
Add four RS232 & four RS422/485 serial ports to your standard or low profile system through a PCIe slot. The PEX8S232485 8-Port PCIe Serial Combo Card lets you add four RS232 & four RS422 / RS485 serial ports to your PC through a single PCI Express expansion slot. This multi-port serial card is a single card solution that offers compatibility with nearly any serial communication protocol, supporting RS-232, RS-422, RS-485 2-wire or RS-485 4-wire operating modes at data rates up to 460 Kbps. To fit most standard computer cases, the card ships with a standard profile bracket installed &

Includes::
a low-profile / half-height bracket for adapting to slimline or small form factor systems. Plus, the included breakout cable helps to avoid cluttered connections.

...
Available
£243.56
Wall-mount your server or networking equipment sideways, for easy access. The RK819SIDEM Side-mounted Wallmount Open Frame Rack/ Cabinet is an 8U server rack that lets you mount your (19-inch wide) servers, A/V or network equipment facing perpendicular to the wall, for easy access to mounted devices & equipment. The cabinet/rack features open access to both the front & back of your devices, making it easy to adjust cabling, view LEDs & access configuration buttons as needed. Plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks, without causing an obstruction. Constructed of high-quality SPCC cold-rolled steel, for strength & durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...
Available
£240.99
Wall-mount your server or networking equipment sideways, for easy access. The RK819SIDEM Side-mounted Wallmount Open Frame Rack/ Cabinet is an 8U server rack that lets you mount your (19-inch wide) servers, A/V or network equipment facing perpendicular to the wall, for easy access to mounted devices & equipment. The cabinet/rack features open access to both the front & back of your devices, making it easy to adjust cabling, view LEDs & access configuration buttons as needed. Plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks, without causing an obstruction. Constructed of high-quality SPCC cold-rolled steel, for strength & durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...
Available
£149.99
Wall-mount your server or networking equipment with a hinged rack design for easy access & maintenance. The RK819WALLOH 8U 22in Depth Hinged Open Frame Wall Mount Server Rack lets you wall mount your (19-inch wide) servers, A/V or network equipment & features a hinged rack design that allows the entire frame to swing open for easy installation & maintenance of your equipment. The 8U wallmount rack offers a 4 post design for additional support of your equipment, storing a maximum weight capacity of 63kg (140 lbs). Constructed of high-quality SPCC cold-rolled steel for strength & durability, the open frame wallmount server rack allows for maximum airflow, & ships complete with all of the rack screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...
Available
£179.98
Wall-mount your server or networking equipment with a hinged rack design for easy access & maintenance. The RK819WALLOH 8U 22in Depth Hinged Open Frame Wall Mount Server Rack lets you wall mount your (19-inch wide) servers, A/V or network equipment & features a hinged rack design that allows the entire frame to swing open for easy installation & maintenance of your equipment. The 8U wallmount rack offers a 4 post design for additional support of your equipment, storing a maximum weight capacity of 63kg (140 lbs). Constructed of high-quality SPCC cold-rolled steel for strength & durability, the open frame wallmount server rack allows for maximum airflow, & ships complete with all of the rack screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...
Available
£230.31
Wall-mount your server or networking equipment with a hinged rack design for easy access & maintenance. The RK819WALLOH 8U 22in Depth Hinged Open Frame Wall Mount Server Rack lets you wall mount your (19-inch wide) servers, A/V or network equipment & features a hinged rack design that allows the entire frame to swing open for easy installation & maintenance of your equipment. The 8U wallmount rack offers a 4 post design for additional support of your equipment, storing a maximum weight capacity of 63kg (140 lbs). Constructed of high-quality SPCC cold-rolled steel for strength & durability, the open frame wallmount server rack allows for maximum airflow, & ships complete with all of the rack screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately. ...
Available
£80.98
This 8U Open Frame Wall Mount Equipment Rack is a high quality, low cost relay rack that is easy to assemble & install into any environment. The rack can be wallmounted or installed as a free standing storage solution. Able to accommodate common data, audio-video & telecom equipment, the open rack offers a depth of 12in; the wall mounts are positioned 16in apart (center to center), making it suitable for mounting on virtually any wall surface, based on North American wall frame stud spacing standards. ...
Available
£114.01
The RK812WALLOA 8U Open Frame Wall Mount Equipment Rack with Adjustable Depth is a high-quality, sturdy relay rack solution that is easy to assemble & install into any environment. The open rack features an adjustable depth ranging from 12-20 inches, in order to accommodate larger data, network & telecommunications devices. The greater than average depth of the rack also allows for mounting of shelves & other accessories. The wall mounts are positioned 16in apart (center to center), making it suitable for mounting on virtually any wall surface, based on North American wall frame stud spacing standards. This 8U rack can be mounted to the wall in a server room, office, or above a doorway, expanding your workspace & keeping your equipment easily accessible. ...
Available

StarTech.com 8U 19in Wall Mount Side Mount Open Frame Rack Cabinet

Mount your server and networking equipment to the wall, with side mounting for hassle-free access to rear cabling. The RK819SIDEM Side-mounted Wallmount Open Frame Rack/Cabinet is an 8U server rack that lets you mount your (19-inch wide) servers, A/V or network equipment facing perpendicular to the wall, for easy access to mounted devices and equipment. The cabinet/rack features open access to both the front and back of your devices, making it easy to adjust cabling, view LEDs and access configuration buttons as needed. Plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks, without causing an obstruction. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government
GSA Schedule purchases. Constructed of high-quality SPCC cold-rolled steel, for strength and durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws and cage nuts required to mount your equipment, saving the expense of purchasing them separately.
Availability: In Stock
£301.22

Product Description

Mount your server & networking equipment to the wall, with side mounting for hassle-free access to rear cabling. The RK819SIDEM Side-mounted Wallmount Open Frame Rack/ Cabinet is an 8U server rack that lets you mount your (19-inch wide) servers, A/V or network equipment facing perpendicular to the wall, for easy access to mounted devices & equipment. The cabinet/rack features open access to both the front & back of your devices, making it easy to adjust cabling, view LEDs & access configuration buttons as needed. Plus, the nature of the sidemount configuration allows for deeper mounting depths than typical wallmount racks, without causing an obstruction. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. Constructed of high-quality SPCC cold-rolled steel, for strength & durability, the open frame equipment rack allows for maximum airflow while still supporting a maximum weight capacity of 159kg (350 lbs). The wall mount rack also ships complete with all of the M5 screws & cage nuts required to mount your equipment, saving the expense of purchasing them separately.

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Steel - An alloy made predominately of Iron combined with <2% carbon
Inch - Equivalent to approximately 2.5cm
Wall - A physical barrier between two areas
Screws - A simple device use for physically attaching two objects together
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
Quality - An object that has quality is superior in function and finish than a less quality object.
Weight - a measurement of how heavy an object appears due to the pull of gravity. For example the weight of an object on planet earth will be different to the weight of the object on the moon
Network - A link and communication between things. Often computers or people.
Cage - an object that is used to contain something, often animals.
Equipment - A product or good that is tactile.
Wide - Something with a large width.

Supplier Information

Page Updated: 2022-10-13 15:56:15

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu