More From Contributor

£271.36
The Thunderbolt 3 m.2 enclosure lets you take advantage of the speed & size of PCIe M.2 internal solid-state drives, connected externally to your Thunderbolt 3 desktop or laptop computer. This Thunderbolt 3 to PCIe M.2 adapter lets you take advantage of the speed of PCIe solid-state drives, connected externally to your Thunderbolt 3 desktop or laptop computer. The adapter combines the Star Tech.com Thunderbolt 3 PCIe Expansion Chassis (TB31PCIEX16) & the M.2 PCIe SSD adapter card (PEX4M2E1), giving you a Display Port output & an additional Thunderbolt 3 port. Get ultra-fast data access by adding this PCIe M.2 SSD adapter externally to your existing Thunderbolt 3 computer, using the Thunderbolt 3 chassis
- improving your storage performance & expanding overall capacity. The adapter supports PCIe M.2 SSDs (NVMe & AHCI): 2242, 2260, 2280, & 22110 drives. Connect additional displays through the chassis' dedicated Display Port output & second Thunderbolt 3 (USB (Universal Serial Bus)-C) port (USB (Universal Serial Bus)-C video adapter may be required). With two extended displays, you can multitask effortlessly, avoiding the hassle of repositioning open windows or programs repeatedly throughout your workday. You can assemble & connect the adapter in minutes. Put it together using only a screwdriver then plug & play with no software or drivers required.
...
Available
£69.34
Add two Next Generation Form Factor M.2 SSDs & two SATA ports to your computer through PCI Express. This M.2 SSD RAID controller card lets you install two M.2 NGFF (Next Generation Form Factor) drives in your desktop computer. The card also features two SATA III (6 Gbps) ports & supports hardware RAID. Now, you can merge the speed & compact size of M.2 solid state drives (SSD) with the storage capacity of traditional hard disk drives (HDD). This M.2 controller card lets you take advantage of the size & performance benefits of NGFF SSDs. M.2 drives are smaller than typical platter drives or m SATA-based SSDs, so you can install them in small form-factor PCs & servers, or in tighter areas within your computer case. When you couple the card with an M.2 drive, you can give your computer's performance a noticeable speed boost. By installing your operating system on the M.2 drive, you'll have faster access to the files you commonly use, & you can continue to use your higher-capacity platter HDD for bulk storage. Due to their performance & size advantages, M.2 drives are commonly used in laptops. If your laptop has failed but its M.2 drive is functional, then this card can help with data recovery. Once the M.2 drive is installed & the data recovery is complete, you can continue to use the drive for storage & backup purposes. If you need a scalable, internal storage solution that you can count on, then this card can help. It supports a range of RAID configurations (RAID 0, 1, & 10), giving you multiple ways to expand your storage, improve your computer's performance, or to create data redundancy backups. Because the M.2 card supports port multiplication, you can connect up to four drives to one of the card's SATA ports. With a built-in port multiplier, you can install up to seven drives (two M.2 SSDs, five SATA drives) in your computer through this single drive controller. You can rest assured that your M.2 SATA drives are compatible with ...
Available
£30.78
Turn your M.2 NGFF SATA drive into an ultra-fast, ultra-portable storage solution for USB (Universal Serial Bus)-C enabled devices. This compact M.2 SSD enclosure lets you add highly portable data storage to any laptop or computer with a USB (Universal Serial Bus)-C port
- such as Mac Book, Chromebook Pixel, Dell XPS laptops, & many others. It turns your SATA M.2 drive into a high-speed storage solution over a USB (Universal Serial Bus) 3.1 Gen 2 connection, at up to 10 Gbps throughput. This slim, pocket-sized M.2 NGFF SSD enclosure has been specially designed for mobility, with a small form factor design that fits easily into your laptop bag. Its lightweight yet durable aluminum housing helps to ensure your drive won't be damaged while you're on the move. Ventilation holes help to dissipate heat & help ensure an optimum operating temperature. Leverage the speed of your M.2 NGFF SATA drive with this external enclosure. It delivers USB (Universal Serial Bus) 3.1 Gen 2 data transfer speeds up to 10 Gbps as well as UASP support, so you can achieve higher transfer speeds when you connect it to a UASP-enabled host computer. The enclosure works with tablets, laptops & desktop computers & is compatible with hosts equipped with Thunderbolt 3 USB (Universal Serial Bus)-C ports. The enclosure is compatible with all of the common M.2 SSDs, & enables you to mount multiple drive lengths, including: 30mm (2230), 42mm (2242), 60mm (2260), & 80mm (2280).
...
Available
£22.47
Turn your solid state drive into an ultra-portable pocket drive. The SM2NGFFMBU33 external USB (Universal Serial Bus) 3.0 to M.2 (NGFF) enclosure turns your SATA M.2 solid state drive into a portable, high speed USB (Universal Serial Bus) 3.0 drive. Get higher external performance by using an M.2 SSD in place of a platter drive, harnessing the full potential of your USB (Universal Serial Bus) 3.0 computer system. The enclosure supports UASP, enabling you to achieve transfer speeds up to 70% faster than traditional USB (Universal Serial Bus) 3.0 when used with a UASP-enabled host computer. This slim, pocket-sized SSD enclosure has been specifically engineered for mobility. The enclosure features a lightweight yet durable design, which fits easily into your pocket or laptop bag. For further convenience, the enclosure is powered entirely using the USB (Universal Serial Bus) host bus & requires no external power adapter. Durable aluminum construction helps to ensure your drive won't be damaged while you're on the move. Plus, to maximize heat dissipation the enclosure features specially engineered ventilation holes which help maintain a cooler operating environment for optimal performance & a longer life span for your drive. For wide compatibility with all of the common M.2 solid state drives, the enclosure can mount multiple drive heights including: 2242, 2260, & 2280. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...
Available
£27.04
Turn your solid state drive into an ultra-portable pocket drive. The SM2NGFFMBU33 external USB (Universal Serial Bus) 3.0 to M.2 (NGFF) enclosure turns your SATA M.2 solid state drive into a portable, high speed USB (Universal Serial Bus) 3.0 drive. Get higher external performance by using an M.2 SSD in place of a platter drive, harnessing the full potential of your USB (Universal Serial Bus) 3.0 computer system. The enclosure supports UASP, enabling you to achieve transfer speeds up to 70% faster than traditional USB (Universal Serial Bus) 3.0 when used with a UASP-enabled host computer. This slim, pocket-sized SSD enclosure has been specifically engineered for mobility. The enclosure features a lightweight yet durable design, which fits easily into your pocket or laptop bag. For further convenience, the enclosure is powered entirely using the USB (Universal Serial Bus) host bus & requires no external power adapter. Durable aluminum construction helps to ensure your drive won't be damaged while you're on the move. Plus, to maximize heat dissipation the enclosure features specially engineered ventilation holes which help maintain a cooler operating environment for optimal performance & a longer life span for your drive. For wide compatibility with all of the common M.2 solid state drives, the enclosure can mount multiple drive heights including: 2242, 2260, & 2280. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...
Available
£29.65
Add high-performance external data storage to your USB (Universal Serial Bus)-C laptop, tablet or desktop computer, with this SATA M.2 SSD enclosure. It lets you use your SATA M.2 drive as an ultra-fast external storage solution over a USB (Universal Serial Bus) 3.1 Gen 2 connection. It's ideal for your Mac Book, Dell XPS, Chromebook Pixel or other USB (Universal Serial Bus) Type-C device. The compact M.2 SATA to USB (Universal Serial Bus) adapter is easily portable & gives you high-speed access to your data, wherever you go. The integrated USB (Universal Serial Bus)-C cable (6"/15.2 cm), means you're always ready to plug it in, without having to remember to bring along a cable. The sturdy aluminum & plastic enclosure encases your M.2 SATA SSD & features built-in ventilation that improve heat dissipation to help keep your drive at a suitable operating temperature. Easily use your M.2 SATA drive as external data storage. This M.2 NGFF SSD enclosure provides a simple connection to your M.2 SATA SSD over USB (Universal Serial Bus) 3.1 Gen 2. You can transfer files quickly, without bottlenecks, using a SATA M.2 SSD as your external drive. The enclosure supports common M.2 SATA SSDs & multiple drive lengths, including: 42 mm (2242), 60 mm (2260), & 80 mm (2280). The USB (Universal Serial Bus) to M.2 SATA enclosure works with USB (Universal Serial Bus)-C host devices & is also compatible with Thunderbolt 3 USB (Universal Serial Bus)-C ports. ...
Available
£16.80
Convert an M.2 NGFF SSD into a 7mm high 2.5in SATA 6 Gbps Open Frame SSD. Vastly increase system performance by adding the speed of an M.2 SSD (Next Generation Form Factor) in any 2.5" SATA application, with the SAT32M225 M.2 SSD to SATA adapter. Utilize the full potential of your SATA III controller, with an M.2 SSD reducing your data transfer bottleneck with file transfer speeds up to 6 Gbps. M.2 SSDs can also save you money by reducing your power consumption over regular platter drives. Help protect the health of your drive with an open-frame design that maximizes heat dissipation. ...
Available
£26.55
Add the fast performance of an M.2 NVMe SSD to your desktop computer or server by converting the drive through a U.2 (SFF-8639) compatible interface on your motherboard. This PCI Express M.2 to U.2 adapter makes it easy to install an M.2 PCIe NVMe SSD into your desktop PC or server, & connect to the drive through an available U.2 (SFF-8639) compatible interface on your motherboard. The M.2 to U.2 adapter is ideal for IT professionals, system integrators & installers, & enthusiasts who are building or upgrading a server or desktop computer. It supports one M.2 PCIe NVMe SSD (M-Key), providing a cost-effective way to add M.2 NVMe performance to your computer or server through an available U.2 (SFF-8639) compatible interface on your motherboard. The M.2 to U.2 adapter works with all desktop PCs & servers that have an available drive bay or a U.2 (SFF-8639) compatible host interface. The adapter card is OS independent, so there are no drivers or software required for installation. ...
Available
£29.53
The 50-pack of M5 mounting screws & cage nuts for server racks & cabinets is ideal to have on hand for installing servers, network equipment, AV equipment & other rackmount devices securely into your storage cabinet or server rack. A complete package of 50 stainless steel screws & 50 stainless steel nuts provides enough mounting hardware to setup almost any rack. ...
Available
£55.20
This 100-pack of M5 mounting screws & cage nuts for server racks & cabinets is ideal to have on hand for installing servers, network equipment, AV equipment & other rackmountable devices securely into your storage cabinet or server rack. A complete package of 100 stainless steel screws & 100 stainless steel nuts provides enough mounting hardware to setup almost any rack. ...
Available

StarTech.com M.2 SATA Raspberry Pi Adapter

Connect an M.2 SATA drive to your development board, to increase data storage capacity. Increase the data storage capacity of your Raspberry Pi or other development board, by connecting it directly to an M.2 NGFF SATA SSD. Perfect for custom projects and applications, this USB to M.2 SATA converter supports all models of Raspberry Pi as well as other development boards. This convenient USB 2.0 to M.2 SATA converter lets you overcome data storage limitations of your development board by enabling you to connect an M.2 SATA drive through your board's USB-A port. The USB to M.2 SATA converter integrates seamlessly with your existing development board. It's the perfect addition for development-board based applications such as surveillance, media players and servers, digital signage and
IoT/automation solutions. It enables you to utilize your M.2 SATA drives with your dev board, and take advantage of the small form factor of M.2 SATA which makes it ideal for applications with space limitations. Compatible with M.2 SATA drives (2230, 2242, 2260, and 2280), the converter is easy to install and doesn't require any device driver installation. It comes with a USB cable and all mounting accessories, including standoffs, so integrating it with your Raspberry Pi is fast and easy. This converter works with M.2 SATA SSDs only. To see which type of M.2 drive you have, simply look at the number of notches (or keys) on the drive end that connects with the M.2 socket. SATA-based M.2 drives have two notches (an M key and a B key), while PCIe-based M.2 drives have just one notch
(an M key).
Availability: In Stock
£25.26

Product Description

Connect an M.2 SATA drive to your development board, to increase data storage capacity. Increase the data storage capacity of your Raspberry Pi or other development board, by connecting it directly to an M.2 NGFF SATA SSD. Perfect for custom projects & applications, this USB (Universal Serial Bus) to M.2 SATA converter supports all models of Raspberry Pi as well as other development boards. This convenient USB (Universal Serial Bus) 2.0 to M.2 SATA converter lets you overcome data storage limitations of your development board by enabling you to connect an M.2 SATA drive through your board's USB (Universal Serial Bus)-A port. The USB (Universal Serial Bus) to M.2 SATA converter integrates seamlessly with your existing development board. It's the perfect addition for development-board based applications such as surveillance, media players & servers, digital signage & Io T/automation solutions. It enables you to utilize your M.2 SATA drives with your dev board, & take advantage of the small form factor of M.2 SATA which makes it absolutely ideal for applications with space limitations. Compatible with M.2 SATA drives (2230, 2242, 2260, & 2280), the converter is easy to install & doesn't require any device driver installation. It comes with a USB (Universal Serial Bus) cable & all mounting accessories, including standoffs, so integrating it with your Raspberry Pi is fast & easy. This converter works with M.2 SATA SSDs only. To see which type of M.2 drive you have, simply look at the number of notches (or keys) on the drive end that connects with the M.2 socket. SATA-based M.2 drives have two notches (an M key & a B key), while PCIe-based M.2 drives have just one notch (an M key).

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

USB - Universal Serial Bus
SATA - Serial Advanced Technology Attachment - a connection type for additional drives
Digital - A system that uses only 0s and 1s to transmit data
Key - A physical or virtual device or code used for opening something
Cable - A series of wires bonded to form a single thread
USB - Universal Serial Bus. A method of connecting a device to a computer
Small - something that takes up less space than normal.
Install - A process of putting materials together to create a finished product.
Ideal - Something that satisfies a perfect criteria.
Convenient - Something that suits and fits well to other activities.

Supplier Information

Page Updated: 2022-10-13 15:56:15

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu