Turn your solid state drive into an ultra-portable pocket drive. The SM2NGFFMBU33 external USB (Universal Serial Bus) 3.0 to M.2 (NGFF) enclosure turns your SATA M.2 solid state drive into a portable, high speed USB (Universal Serial Bus) 3.0 drive. Get higher external performance by using an M.2 SSD in place of a platter drive, harnessing the full potential of your USB (Universal Serial Bus) 3.0 computer system. The enclosure supports UASP, enabling you to achieve transfer speeds up to 70% faster than traditional USB (Universal Serial Bus) 3.0 when used with a UASP-enabled host computer. This slim, pocket-sized SSD enclosure has been specifically engineered for mobility. The enclosure features a lightweight yet durable design, which fits easily into your pocket or laptop bag. For further convenience, the enclosure is powered entirely using the USB (Universal Serial Bus) host bus & requires no external power adapter. Durable aluminum construction helps to ensure your drive won't be damaged while you're on the move. Plus, to maximize heat dissipation the enclosure features specially engineered ventilation holes which help maintain a cooler operating environment for optimal performance & a longer life span for your drive. For wide compatibility with all of the common M.2 solid state drives, the enclosure can mount multiple drive heights including: 2242, 2260, & 2280. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Turn your solid state drive into an ultra-portable pocket drive. The SM2NGFFMBU33 external USB (Universal Serial Bus) 3.0 to M.2 (NGFF) enclosure turns your SATA M.2 solid state drive into a portable, high speed USB (Universal Serial Bus) 3.0 drive. Get higher external performance by using an M.2 SSD in place of a platter drive, harnessing the full potential of your USB (Universal Serial Bus) 3.0 computer system. The enclosure supports UASP, enabling you to achieve transfer speeds up to 70% faster than traditional USB (Universal Serial Bus) 3.0 when used with a UASP-enabled host computer. This slim, pocket-sized SSD enclosure has been specifically engineered for mobility. The enclosure features a lightweight yet durable design, which fits easily into your pocket or laptop bag. For further convenience, the enclosure is powered entirely using the USB (Universal Serial Bus) host bus & requires no external power adapter. Durable aluminum construction helps to ensure your drive won't be damaged while you're on the move. Plus, to maximize heat dissipation the enclosure features specially engineered ventilation holes which help maintain a cooler operating environment for optimal performance & a longer life span for your drive. For wide compatibility with all of the common M.2 solid state drives, the enclosure can mount multiple drive heights including: 2242, 2260, & 2280. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Connect an M.2 SATA drive to your development board, to increase data storage capacity. Increase the data storage capacity of your Raspberry Pi or other development board, by connecting it directly to an M.2 NGFF SATA SSD. Perfect for custom projects & applications, this USB (Universal Serial Bus) to M.2 SATA converter supports all models of Raspberry Pi as well as other development boards. This convenient USB (Universal Serial Bus) 2.0 to M.2 SATA converter lets you overcome data storage limitations of your development board by enabling you to connect an M.2 SATA drive through your board's USB (Universal Serial Bus)-A port. The USB (Universal Serial Bus) to M.2 SATA converter integrates seamlessly with your existing development board. It's the perfect addition for development-board based applications such as surveillance, media players & servers, digital signage & Io T/automation solutions. It enables you to utilize your M.2 SATA drives with your dev board, & take advantage of the small form factor of M.2 SATA which makes it absolutely ideal for applications with space limitations. Compatible with M.2 SATA drives (2230, 2242, 2260, & 2280), the converter is easy to install & doesn't require any device driver installation. It comes with a USB (Universal Serial Bus) cable & all mounting accessories, including standoffs, so integrating it with your Raspberry Pi is fast & easy. This converter works with M.2 SATA SSDs only. To see which type of M.2 drive you have, simply look at the number of notches (or keys) on the drive end that connects with the M.2 socket. SATA-based M.2 drives have two notches (an M key & a B key), while PCIe-based M.2 drives have just one notch (an M key). ...

Add high-performance external data storage to your USB (Universal Serial Bus)-C laptop, tablet or desktop computer, with this SATA M.2 SSD enclosure. It lets you use your SATA M.2 drive as an ultra-fast external storage solution over a USB (Universal Serial Bus) 3.1 Gen 2 connection. It's ideal for your Mac Book, Dell XPS, Chromebook Pixel or other USB (Universal Serial Bus) Type-C device. The compact M.2 SATA to USB (Universal Serial Bus) adapter is easily portable & gives you high-speed access to your data, wherever you go. The integrated USB (Universal Serial Bus)-C cable (6"/15.2 cm), means you're always ready to plug it in, without having to remember to bring along a cable. The sturdy aluminum & plastic enclosure encases your M.2 SATA SSD & features built-in ventilation that improve heat dissipation to help keep your drive at a suitable operating temperature. Easily use your M.2 SATA drive as external data storage. This M.2 NGFF SSD enclosure provides a simple connection to your M.2 SATA SSD over USB (Universal Serial Bus) 3.1 Gen 2. You can transfer files quickly, without bottlenecks, using a SATA M.2 SSD as your external drive. The enclosure supports common M.2 SATA SSDs & multiple drive lengths, including: 42 mm (2242), 60 mm (2260), & 80 mm (2280). The USB (Universal Serial Bus) to M.2 SATA enclosure works with USB (Universal Serial Bus)-C host devices & is also compatible with Thunderbolt 3 USB (Universal Serial Bus)-C ports. ...

Convert an M.2 NGFF SSD into a 7mm high 2.5in SATA 6 Gbps Open Frame SSD. Vastly increase system performance by adding the speed of an M.2 SSD (Next Generation Form Factor) in any 2.5" SATA application, with the SAT32M225 M.2 SSD to SATA adapter. Utilize the full potential of your SATA III controller, with an M.2 SSD reducing your data transfer bottleneck with file transfer speeds up to 6 Gbps. M.2 SSDs can also save you money by reducing your power consumption over regular platter drives. Help protect the health of your drive with an open-frame design that maximizes heat dissipation. ...

The 50-pack of M5 mounting screws & cage nuts for server racks & cabinets is ideal to have on hand for installing servers, network equipment, AV equipment & other rackmount devices securely into your storage cabinet or server rack. A complete package of 50 stainless steel screws & 50 stainless steel nuts provides enough mounting hardware to setup almost any rack. ...

This 100-pack of M5 mounting screws & cage nuts for server racks & cabinets is ideal to have on hand for installing servers, network equipment, AV equipment & other rackmountable devices securely into your storage cabinet or server rack. A complete package of 100 stainless steel screws & 100 stainless steel nuts provides enough mounting hardware to setup almost any rack. ...

Install your rack-mountable hardware securely with these high quality cabinet mounting screws & cage nuts. This 20-pack of M5 rack screws & M5 cage nuts is convenient to have on hand for installing rack-mountable equipment, such as your server, network or audio/video equipment. Each pack

Includes:: a cage nut installation tool to ensure a fast & simple installation of each cage nut. The cabinet mounting screws & cage nuts are also suitable for new server rack & cabinet setups
- perfect for those times when you drop or misplace a nut or two. The bulk pack ensures that you have enough available when you need them. The M5 mounting screws & the M5 nuts come in a nickel-plated finish to prevent rust.


...

This 100 Pack of M6 Mounting Screws & Cage Nuts for Server Racks & Cabinets is convenient to have on hand for installing server, network, AV & other rackmount equipment securely into your storage cabinet or server rack. The pack

Includes:: 100 screws & 100 nuts, providing enough mounting hardware to setup any rack you might be working on.

...

Install your rack-mountable hardware securely with these high quality screws. The 50-Pack of M6 Mounting Screws for Server Racks & Cabinets is ideal to have available for installing servers, network equipment, A/V equipment & other rack-mountable devices securely into your storage cabinet or server rack. This package contains mounting screws only, cage nuts sold separately. ...