Fi-Clor Alkalinity Increaser 5kg

Product Description

CORRECTS LOW TOTAL ALKALINITY. Fi-Clor Alkalinity Increaser (Bicarbonate) is for raising the total alkalinity level in swimming pool water. Alkalinity is a measure of the amount of alkali (or in chemical terms, bicarbonates & carbonates) in the water. If the alkalinity is too low, any chemicals added to the pool will directly affect the p H, causing rapid fluctuations in p H readings. Alkalinity at the correct level will help protect, or 'buffer' the p H. Instructions > Take an alkalinity reading on your test kit. You will need to raise the total alkalinity if the reading is below 100mg/l (ppm) for pools sanitised with stabilised chlorines or bromine, or below 80mg/l (ppm) for pools sanitised with Fi-Clor Superfast or Supercapsules. > Pre-dissolve the Fi-Clor Alkalinity Increaser in pool water using a suitable container. In order to avoid concentrated solutions, only dissolve a maximum of 500g of the product in 10 litres of water at a time, adding product to water, never water to product. Dose no more than a total of 1.5kg in a day. > With the circulation system running, distribute evenly around the pool, avoiding the skimmers. > Continue filtration & re-test after 24 hours. If the total alkalinity is still low, repeat the dose.