This glow in the dark clock features a temperature read out. The backlit display features time, date & temperature whilst the translucent case glows with 7 different colours. The light functions when the clock is pressed the colour will change.
To Set Time & Date
Fit the batteries with the correct orientation.
Press SET to activate the time programme (time & date).
Press the Up/ Down in the following sequence after each to confirm press set (hour -> minute -> year->month ->
day -> exit by pressing set.
The range of setting: 1-12 hour, 0-59 for a minute, 2000 – 2099 for a year, 1-12 for a month,
1-31 for the day, the week will change from Monday to Sunday automatically with changes to date.
Setting the Alarm
Press the AL button
Press the set button then using the Up/ Down buttons set the required alarm time pressing the set button to confirm,
(hour -> minute-> snooze set the amount of time between alarm activations -> one of the 8 Melody’s).
When the alarm is set press AL then the up button once to enable the alarm a second time to enable snooze mode.
To change the time from 12H to 24H clock press the up button when the time is set. Changing temperature between
Celsius & Fahrenheit press the down button. To disable the alarm mode, press the up button.
Colour Mode
Press the top of the clock case this will actuate the tap buttons & the appliance will go through a colour change cycle. (Approximately 45 seconds.)