Black synthetic natural looking false eyelashes.
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Fun black false eyelashes which glow in the dark.
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
All our human hair lashes are sterilised. Its softer texture
gives your lashes the most natural look.Description1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Get instant volume and length to your lashes with our black lashes collections! The more delicatelashes are highly recommended for everyday use. For a full-on look, go for the bold ones!Highlight your eyes with our diamante collections. The black lashes are accessorised with glitters, stones or crystals that give you glamour without a fuss.Instructions1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Get edgy and funky with our jumbo lashes. Big personalities come with big lashes, so let your lashes do the talking.Instructions1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Highlight your eyes with our diamante collections. The black lashes are accessorised with glitters, stones or crystals that give you glamour without a fuss.
Get instant volume and length to your lashes with our black lashes collections! The more delicatelashes are highly recommended for everyday use. For a full-on look, go for the bold ones!
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Get instant volume and length to your lashes with our black lashes collections! The more delicatelashes are highly recommended for everyday use. For a full-on look, go for the bold ones!Highlight your eyes with our diamante collections. The black lashes are accessorised with glitters, stones or crystals that give you glamour without a fuss. Instructions1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Black bold synthetic false eyelashes
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Extreme dense purple false eyelashes.
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Long dark natural synthetic false eyelashes
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Get instant volume and length to your lashes with our black lashes
collections! The more delicate lashes are highly recommended for everyday use.
For a full-on look, go for the bold ones! Directions1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Full glow in the dark false eyelashes.
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Get instant volume and length to your lashes with our black lashes collections! The more delicatelashes are highly recommended for everyday use. For a full-on look, go for the bold ones!Highlight your eyes with our diamante collections. The black lashes are accessorised with glitters, stones or crystals that give you glamour without a fuss.Instructions1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Black smoky synthetic false eyelashes.
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Long smoky effect synthetic false eyelashes.
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Get instant volume and length to your lashes with our black lashes collections! The more delicatelashes are highly recommended for everyday use. For a full-on look, go for the bold ones!
Instructions
1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.
2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.
2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Coloured purple striped false eyelashes
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Red striped coloured eyelashes
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Black curvy human hair false eyelashes. These false eyelashes are suitable for any eye shape and are perfect for those who want to add volume to the eyelashes.
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Get instant volume and length to your lashes with our black lashes collections! The more delicate lashes are highly recommended for everyday use. For a full-on look, go for the bold ones!
Directions
1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.
2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.
2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Get instant volume and length to your lashes with our black lashes collections! The more delicatelashes are highly recommended for everyday use. For a full-on look, go for the bold ones!Highlight your eyes with our diamante collections. The black lashes are accessorised with glitters, stones or crystals that give you glamour without a fuss. Instructions1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Highlight your eyes with our diamante collections. The black lashes are accessorised with glitters, stones or crystals that give you glamour without a fuss.Get instant volume and length to your lashes with our black lashes collections! The more delicatelashes are highly recommended for everyday use. For a full-on look, go for the bold ones!Directions1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Highlight your eyes with our diamante collections. The black lashes are accessorised with glitters, stones or crystals that give you glamour without a fuss. Get instant volume and length to your lashes with our black lashes collections! The more delicatelashes are highly recommended for everyday use. For a full-on look, go for the bold ones!Instructions1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Black synthetic natural looking false eyelashes
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Fun large blue feather false eye lashes.
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Long black human hair false eyelashes. These false eyelashes give you a curvy look.
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Pretty pink false eyelashes
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Pretty dual blue coloured false eyelashes
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Sexy black synthetic false eyelashes.
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Get instant volume and length to your lashes with our black lashes collections! The more delicate lashes are highly recommended for everyday use. For a full-on look, go for the bold ones!Get edgy and funky with our jumbo lashes. Big personalities come with big lashes, so let your lashes do the talking. Instructions1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Blue fabric false eyelashes with gold lining.Instructions1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Get instant volume and length to your lashes with our black lashes collections! The more delicate lashes are highly recommended for everyday use. For a full-on look, go for the bold ones!Get edgy and funky with our jumbo lashes. Big personalities come with big lashes, so let your lashes do the talking.Instructions1) Try original length of the lashes before applying or trimming them. Bring lash to eyelid as close to your natural lash line as possible, starting from outer corner.2) If the lash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair to match. If the lash is too long, trim the length by pointing the end of the scissors into the tips of the lash and snip into the lash. Do not cut across in one swoop to achieve a more natural uneven result.3) Apply a thin coat of lash adhesive along lash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the lash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.5) Let the glue dry and test the lashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural lashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.How to remove false eyelashes1) Remove your false lashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the lash. Gently peel the lash off your eyelid, starting at outer corner.2) To clean false lashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the lashes on the original tray and packaging to avoid them losing shape. You can reuse them.
Soft purple coloured false eyelashes.
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.
Dark defined synthetic false eyelashes
Instructions for applying your false eyelashes
1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner.
2) If the eyelash is too wide for your eyes, snip off a few hairs on one end and test it again. Repeat this until the width suits you and trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash and snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result.
3) Apply a thin coat of eyelash adhesive along eyelash band. If necessary, use a tooth pick or the end of tweezers to even out the adhesive.
4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result.
5) Let the glue dry and test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara.
How to remove false eyelashes
1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner.
2) To clean false eyelashes, place them on a counter and put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry and store the eyelashes on the original tray and packaging to avoid them losing shape. You can reuse the eyelashes.