Black smoky synthetic false eyelashes. Instructions for applying your false eyelashes 1) Try against original length of lashes before applying or trimming them. Bring false eyelash to eyelid as close to your natural eyelash line as possible, starting from outer corner. 2) If the eyelash is too wide for your eyes, snip off a few hairs on one end & test it again. Repeat this until the width suits you & trim the other pair of eyelashes to match. If the eyelash is too long, trim the length of the eyelash by pointing the end of the scissors into the tips of the eyelash & snip into the eyelash. Do not cut across in one swoop to achieve a more natural uneven result. 3) Apply a thin coat of eyelash adhesive along eyelash b&. If necessary, use a tooth pick or the end of tweezers to even out the adhesive. 4) Wait for a few seconds until glue becomes tacky. Looking down into the mirror, place the eyelash as close to your natural lash line as possible along its length. Adjust using finger tips or tweezers while glue is still pliable to your satisfactory result. 5) Let the glue dry & test the eyelashes out by lightly pressing them upward with your finger. When they are completely dry, blend your natural eyelashes into them using your fingers, an eyelash or eyebrow brush or an eyelash curler or by applying a thin coat of mascara. How to remove false eyelashes 1) Remove your false eyelashes with a makeup remover. Using a cotton bud, gently apply the remover along the edge of the eyelash. Gently peel the eyellash off your eyelid, starting at outer corner. 2) To clean false eyelashes, place them on a counter & put a few drops of water over them. After a minute or so it will be easy to pull the glue off the strip. Let dry & store the eyelashes on the original tray & packaging to avoid them losing shape. You can reuse the eyelashes.