Puller with two reversible legs for external and internal pulling of gears bearings etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with ch...
Forged steel 2-way yoke allows twin or triple leg pulls. 10tonne Hydraulic power unit with tommy bar. Suitable for pulling hubs flanges gears and bearings. Three 3-position puller arms and three sets of extension plates supplied in carry-case. Hyd...
Multi-purpose pulling set for internal and external pulls. 125mm Forged puller arms with forcing screws suitable for pulls up to 5ton. Two-way yoke allows two- or three-jaw pulls. Supplied in tough storage tray.
Multi-purpose pulling set for internal and external pulls. 100mm Forged puller arms with forcing screws suitable for pulls up to 2 ton. Two-way yoke allows two- or three-jaw pulls. Supplied in tough storage tray.
Suitable for removing and installing the upper front ball joint in situ without the need to disassemble. Features a variety of adaptors used in different combinations for extracting and installing. Supplied in a carry-case with each part numbered for...
Suitable for removal of a variety of blind bearings where traditional bearing and gear pullers will not reach. Ball-end tips fit inside bearing races to provide traction for bearing extraction. Chrome Vanadium steel components. Ideal for a wide varie...
Heavy-duty twin leg bar type puller suitable for easy removal of pulleys flywheels bearings and gears. Drop-forged Chrome Vanadium steel. Heat treated for added strength. Chrome plated for corrosion resistance. Thrust bearing prevents wear and dam...
Heavy-duty twin leg bar type puller suitable for easy removal of pulleys flywheels bearings and gears. Drop-forged Chrome Vanadium steel. Heat treated for added strength. Chrome plated for corrosion resistance. Thrust bearing prevents wear and dam...
Puller with a two and three leg option for external and internal pulling of gears bearings etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread.. .
The Facom DCR.IPREN kit is designed to allow removal of Bosch injectors from Mercedes CDI engines. Suitable for injectors that are too tight or be removed with a large slide hammer. Not suitable for heavily corroded injectors. Particularly good thoug...
Interchangeable jaws and forged carbon steel body allows ball joint on commercial vehicles to be removed with minimal effort by use of the hydraulic puller. Adjustable jaw opening with maximum opening capacity 95mm. Supplied with instruction manual.. ..
5mm Steel plate body with smooth Acme threads giving 30% more efficiency than conventional threads. Suits most popular front wheel drive vehicles. Uses bolts to attach hubs and struts (not straps). Supplied in steel case.
Twin/triple-legged yoke with three drop-forged, Chrome Vanadium steel legs. Legs may be used for internal or external pulls. Spring-loaded mechanism allows for fast leg changes. Removable thrust plate prevents damage to shaft end.
Heavy-duty twin leg bar type puller suitable for easy removal of pulleys flywheels bearings and gears. Drop-forged Chrome Vanadium steel. Heat treated for added strength. Chrome plated for corrosion resistance. Thrust bearing prevents wear and dam...
Puller with a two and three leg option for external and internal pulling of gears bearings etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread.. .
Puller with three reversible legs for external and internal pulling of gears bearings etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with. ..
Essential time and money saver remove and install press-fit control arm ball joints on BMW 3 Series E36 vehicles. MOT Specific application. Use in situ there is no requirement to remove the control arm from the vehicle. Includes all necessary adapt...
Comprehensive kit for fast and effective in situ removal/installation of wheel bearings suspension bushes and seals. Reduces the possibility of damaging the bearing/suspension housings. Supplied with four stepped end plates and four force screws in. ..
Multi-purpose pulling set for internal and external pulls. Forged puller arms with forcing screws suitable for pulls up to 5ton. 2-Way yoke allows two- or three-jaw pulls.
Model No: PS974 Maximum Spread: 150mm Maximum Reach: 150mm ...
Heavy-duty twin leg bar type puller suitable for easy removal of pulleys flywheels bearings and gears. Drop-forged Chrome Vanadium steel. Heat treated for added strength. Chrome plated for corrosion resistance. Thrust bearing prevents wear and dam...
Drop-forged high carbon steel reversible legs and body. Heat treated and zinc plated to resist corrosion. Swivel thrust plates on larger sizes prevent damage to shaft ends. Hex head forcing screws suitable for use with a ratchet or spanner.
For use in conjunction with Sealey Hydraulic Ball Joint Installer/Removal Kit (Model No. VSE127H). Set contains various adaptors for front ball joint removal/installation on Renault Laguna (93-00).
Considering the wide range of vehicles on the market sometimes the standard sill clamps just will not fit. This set of clamps give an extra positional choice for the carriage anchorage tube and because of their extra length they grip the sill tigh...
Puller with three reversible legs for external and internal pulling of gears bearings etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with. ..
Steering wheel yoke manufactured from drop-forged carbon steel. Fits most Vauxhall/Opel Ford and Chrysler vehicles. Suitable also as two or three-way puller for removal of pulleys and flywheels from small engines. The larger ductile steel yoke is su...
Puller with two reversible legs for external and internal pulling of gears bearings etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with ch...
Puller with three reversible legs for external and internal pulling of gears bearings etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with. ..
Three forged steel forks. Interchangeable shafts for use with ball pein hammer or air hammer with. 401& shanks (Sealey GSA11, GSA12, SA11, SA12). Suitable for most small cars and light commercials.
Six position multi-function puller with adjustable two or three leg function. Allows bearings gears etc. to be removed with minimal effort by use of the hydraulic puller. Supplied with instruction manual. Packed in blow mould carrying case with dis...
Suitable for removal and installation of spring and shock strut from steering knuckle. Prevents expensive damage to aluminium or cast iron steering hubs. Excellent also for spreading the clamp on lower ball joints. Wide range of vehicle applications....
High security coil spring compressor with 1200kg maximum capacity per pair. Features adjustable safety bar for additional security and compressors have lower safety jaws for ultimate peace of mind. Use 19mm hex socket or spanner.
Innovative new tool suitable for 95% of all cars with wishbone suspension front or rear. Saves time over traditional methods of demounting springs and saves realignment of suspension during reassembly. This is the only aftermarket tool currently on t...
Designed for the fast and safe removal of small bearings. Screw press operated by tommy-bar or by 14mm drive exerts up to 1tonne of pressure. Spring loaded and drop-forged legs are secured around the bearing or gear by a screw collar to prevent sli...
Essential time and money saver removes and installs press-fit control arm ball joints on BMW 3 Series vehicles. MOT specific application. Use in situ, there is no requirement to remove the control arm from the vehicle. Includes all necessary adaptor.. .
1100kg Maximum jaw loading with 4x safety factor. Supplied with two pairs of drop forged yokes. Safety yokes carefully shaped to prevent coil spring from bowing. Suitable for use with air impact wrenches. Wide availability of standard and optional yo...
Drop-forged high carbon steel reversible legs and body. Heat treated and zinc plated to resist corrosion. Swivel thrust plates on larger sizes prevent damage to shaft ends. Hex head forcing screws suitable for use with a ratchet or spanner.
The Facom DCR.IPMBPB kit is designed to allow removal of Bosch injectors from Mercedes CDI engines. Suitable for injectors that are too tight or be removed with a large slide hammer. Not suitable for heavily corroded injectors. Particularly good thou...
Puller with two reversible legs for external and internal pulling of gears bearings etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with ch...
Heavy-duty twin leg bar type puller suitable for easy removal of pulleys flywheels bearings and gears. Drop-forged Chrome Vanadium steel. Heat treated for added strength. Chrome plated for corrosion resistance. Thrust bearing prevents wear and dam...
Enables fast and simple removal of crankshaft and auxiliary pulleys - even in a confined space. Chrome Molybdenum legs with thin jaws allow removal of pulleys with narrow tolerance between pulley and block. Supplied in carry-case.
Twin/triple-legged yoke with three drop-forged, Chrome Vanadium steel legs. Legs may be used for internal or external pulls. Spring-loaded mechanism allows for fast leg changes. Removable thrust plate prevents damage to shaft end.
Low profile set suitable for most modern vehicles. Three sizes of jaw allow use on most cars and light commercial vehicles. Features heavy-duty forged steel body and hardened screw with thrust ball. Supplied in carry-case.
2500kg Maximum loading. Heavy-duty lightweight unit made from high tech steel alloy. Supplied with one pair of yokes that will cover 90% of the car market. Safety yokes with polyurethane inserts for improved grip are carefully shaped to prevent th...
2250kg Maximum jaw loading with 2.9 x safety factor. Supplied with two pairs of drop-forged yokes. Safety yokes carefully shaped to prevent coil spring from bowing. Suitable for use with air impact wrenches. Wide availability of standard and optional...
Master set of gear pullers and bearing separators supplied in carry-case. Forged steel bearing separator. 10tonne Hydraulic ram compatible with other sets in the range.
Designed for fast and safe removal of bearings. Hydraulic screw press exerts up to 10ton of load. Spring-loaded and drop-forged legs are secured around the bearing or gear by a screw collar to prevent slipping and subsequent damage or injury. Suitabl...
Specially designed to fit four and five stud hubs fitted to cars and light commercial vehicles. Unique design allows for the leg angle to change as the hub is being pulled. Force screw handle included and supplied in carry-case.
Hydraulic ram piston fits all Sealey hydraulic puller sets and is also suitable for use with other popular makes of hydraulic gear pullers. Screw mechanism converts power to 10tonne ram head with enough force to remove most stubborn bearings pulleys...
The Facom DCR.IPPSAPB kit is designed to allow removal of Bosch and Siemens injectors from Peugeot Citroen Fiat & Lancia engines. Suitable for injectors that are too tight or be removed with a large slide hammer. Not suitable for heavily corroded i...
Removes the diesel pump and retains the pump sprocket in-situ so that the sprockets/timing chain configuration remains undisturbed, minimising the level of engine disassembly. Essential for transversely fitted engines. For engine timing use Setting/L...