The Rome Garage Rocker is an easy riding do everything board that will leave you with money left in the tank for lift pass and beers. It has a full wood core and bi-axial fibreglass construction that makes it easy to manoeuvre for controlling tricks and getting away with sketchy landings. It also features Rome's Freepop profile that has a mostly flat base with rocker in the tip and tail for easier butter tricks, better balance when pressing the board and extra float in the powder. Finally, this is aIl enhanced by Quickrip sidecut technology that makes the board feel agile at slow speed, yet stable when you need to be down that home run in record time.Features:FreePop Rocker/CamberQuickrip sidecut techGlass Reverse V-Stringer techTTT Core MatrixStraightBiax laminateXtrd baseGlossary:Glass Reverse V-Stringer tech:Glass stringers connect the binding region to the centre line of the nose and tail for more freestyle pop without any freeride torque.TTT Core Matrix:Full tip-to-tail wood gives a dynamic and responsive feel under foot, and that distinctive pop of wood.StraightBiax laminate:90 off-axis fibre configuration is torsionally forgiving and keeps the feel super playful.Xtrd base:A high 1.45 abrasion resistance creates a base that is durable, simple and easy to repair.
The Rome Artifact Rocker has been built for riders looking to have fun all over the mountain, from riding park obstacles to getting creative on the piste and beyond. It features Rome's PopRock technology that combines a flat base with rocker outside the feet toward the tip and tail that makes it stable on boardslides, and ridiculously playful and catch-free for maximum confidence when learning new tricks. For extra strength and stability Rome incorporate fibreglass Hotrods in the centreline of the nose and tail that give the board response, and Glass Impact plates underfoot for compression resistance on hard landings. Finally, Rome's Quickrip sidecut gives the board a loose and playful feel at slow speeds, and power and stability when going fast.Features:JibPop Rocker/CamberQuickrip sidecut techGlass Impact platesHotRod techImpact Core MatrixStraightBiax laminateImpact baseGlossary:JibPop Rocker/Camber:The loosest, most playful and most press-happy camber in the Rome collection that is flat in the midsection with rocker in the nose and tail. The flat section is stable on boardslides, while the rocker optimizes press tricks and gives a nearly catch-free ride.Glass Impact plates:Provide lightweight anti-compression strength under the bindings to combat the abuse of hard landings.HotRod tech:A rod of fibreglass placed in the centreline of the nose and tail for higher ollies and nollies.Impact Core Matrix:A 40% wood composite material is impregnated with wood fibres to create a core that is super durable, environmentally friendly and smooth flexing.StraightBiax laminate:90 off-axis fibre configuration is torsionally forgiving and keeps the feel super playful.Impact base:An advanced extruded compound combines high molecular density and high abrasion resistance for added strength against abuse by rails and rocks.
The Raygun offers incredible performance for the money, and once ridden, you realise youve got an absolute bargain. Ridden by long term K2 pro Travis Parker, its one of those boards that anyone from a seasoned rider or progressing newbie can get on and enjoy. It rides so well because of its all terrain rocker shape that gives you a stable flat section through the middle for stability and carving, and a slight rocker in the nose for extra lift in powder. Its a go anywhere do anything board with a rather attractive price tag. Features All Terrain Rocker base profile Hybritaper construction Twin shape w/setback stance Hyper Progressive sidecut W1 core Biax fibreglass w/ICG 10 2000 Extruded base Glossary All Terrain Rocker:70% flat base/30% Rocker with a setback stance, medium rise through the tip and a lower rise in the tail allows for effortless turns on hardpack but also provides ample float in soft snow and crud. Hybritaper construction:Features sidewalls along the running surface that flow into the nose and tail for low swing weight, optimized turn initiation and durability. Also tapers out the core at the tip and tail, and blends the tips into a thin sandwich removing excess material. Hyper Progressive sidecut:An infinite number of different radii are blended together flawlessly from mellow in the tips, to more aggressive in the centre. The result is a predictable feel that never hooks, response at high speeds and a smooth ride. W1 Core:Uses a single species of pure wood w/proven flex, durability and snap. Biax:A classic structure laminate that provides the best smooth all-purpose performance. 2000 Extruded base:Fast and durable, and easy to tune and repair. *Please note that base colours may vary
The K2 Playback is a great value board that rides exceptionally well for the money. It is perfect for anyone starting out, or a great freestyle twin board for someone that wants to save money for their lift pass. Its appeal to both newbies and freestylers lies in the construction and starts with Flatline Technology, a flat base construction that means less edge catching, easier manoeuvrability for freestyle tricks, and improved float in powder. The flex is also engineered to be playful, yet stable so you can confidently progress your bag of tricks and be stable at higher speeds.Features:Flatline technology base profileHybritaper construction Twin shape w/centred stanceHyper Progressive sidecutW1 coreBiax fibreglass 2000 Extruded baseGlossary:Flatline technology:100% flat base profile that creates a supremely balanced, smooth ride for both aspiring and accomplished pros.Hybritaper construction:Features sidewalls along the running surface that flow into the nose and tail for low swing weight, optimized turn initiation and durability. Also tapers out the core at the tip and tail, and blends the tips into a thin sandwich removing excess material.Hyper Progressive sidecut:An infinite number of different radii are blended together flawlessly from mellow in the tips, to more aggressive in the centre. The result is a predictable feel that never hooks, response at high speeds and a smooth ride.W1 Core:Uses a single species of pure wood w/proven flex, durability and snap.Biax:A classic structure laminate that provides the best smooth all-purpose performance.2000 Extruded base:Fast and durable, and easy to tune and repair. *Please note that base colours may vary
The K2 Parkstar is a versatile, high spec Freestyle Rocker board for intermediate to advanced riders that like to ride freestyle all over the mountain. It features K2's Jib Rocker, which makes it easier for presses, butters and riding away from virtually everything. It also has a Triax weave fibreglass with ICG10 tech, and Carbon I fibres in the core for rock solid stability at speed and on big landings, but enough end-to-end play. Finally, the high grade 4000 sintered base delivers consistent speed in all conditions. Features:Jib Rocker base profileHybritaper constructionTwin shape w/centred stanceHyper Progressive sidecutW2 coreTriax fibreglass w/ICG 10Carbon Web I4000 Sintered baseGlossary:Jib Rocker:80% Flat/20% Rocker w/just enough rise in the tip and tail to create a loose, buttery feel on all terrain. Contact points stay well off the snow until engaged, eliminating edge hook while maintaining fun pop.Hybritaper construction:Features sidewalls along the running surface that flow into the nose and tail for low swing weight, optimized turn initiation and durability. Also tapers out the core at the tip and tail, and blends the tips into a thin sandwich removing excess material.Hyper Progressive sidecut:An infinite number of different radii are blended together flawlessly from mellow in the tips, to more aggressive in the centre. The result is a predictable feel that never hooks, response at high speeds and a smooth ride.W2 Core:3 species of renewable wood are used to optimize strength, reduce weight and enhance damping.Triax fibreglass:A glass laminate w/diagonal layers that stiffen the board torsionally for improved edge hold and stability.ICG 10:Integrates carbon into the fibreglass to reduce weight and create a smooth release of power while increasing pop and liveliness.Carbon Web I:Brings the pop and snap of carbon closer to the bindings for maximum ollies and control.4000 Sintered base:One of the fastest natural base materials available, it is exceptionally durable absorbs wax deeper and retains it longer. *Please note that base colours may vary
This year's K2 Parkstar has added onto what is an incredible all mountain freestyle board that performs all over the mountain. This board is not for the faint hearted as its 4000 sintered base and W2 core with carbon webbing makes for a super fast, reactive ride. The jib rocker shape and twin hyper progressive sidecut gives a high level of stability when riding straight and fast but it also makes it easy to initiate turns and play. The new tweekend provides a stable platform at the tip and tail for buttering, jibbing, landing big jumps, and floating in powder Features Jib Rocker base profile Hybritaper construction Twin shape w/centred stance Hyper Progressive sidecut W2 core Triax fibreglass w/ICG 10 Carbon Web I 4000 Sintered base Glossary Jib Rocker:80% Flat/20% Rocker w/just enough rise in the tip and tail to create a loose, buttery feel on all terrain. Contact points stay well off the snow until engaged, eliminating edge hook while maintaining fun pop. Hybritaper construction:Features sidewalls along the running surface that flow into the nose and tail for low swing weight, optimized turn initiation and durability. Also tapers out the core at the tip and tail, and blends the tips into a thin sandwich removing excess material. Hyper Progressive sidecut:An infinite number of different radii are blended together flawlessly from mellow in the tips, to more aggressive in the centre. The result is a predictable feel that never hooks, response at high speeds and a smooth ride. W2 Core:3 species of renewable wood are used to optimize strength, reduce weight and enhance damping. Triax fibreglass:A glass laminate w/diagonal layers that stiffen the board torsionally for improved edge hold and stability. ICG 10:Integrates carbon into the fibreglass to reduce weight and create a smooth release of power while increasing pop and liveliness. Carbon Web I:Brings the pop and snap of carbon closer to the bindings for maximum ollies and control. 4000 Sintered base:One of the fastest natural base materials available, it is exceptionally durable absorbs wax deeper and retains it longer. *Please note that base colours may vary
The Rome Artifact Rocker has been built for riders looking to have fun all over the mountain, from riding park obstacles to getting creative on the piste and beyond. It features Rome's PopRock technology that combines a flat base with rocker outside the feet toward the tip and tail that makes it stable on boardslides, and ridiculously playful and catch-free for maximum confidence when learning new tricks. For extra strength and stability Rome incorporate fibreglass Hotrods in the centreline of the nose and tail that give the board response, and Glass Impact plates underfoot for compression resistance on hard landings. Finally, Rome's Quickrip sidecut gives the board a loose and playful feel at slow speeds, and power and stability when going fast.Features:JibPop Rocker/CamberQuickrip sidecut techGlass Impact platesHotRod techImpact Core MatrixStraightBiax laminateImpact baseGlossary:JibPop Rocker/Camber:The loosest, most playful and most press-happy camber in the Rome collection that is flat in the midsection with rocker in the nose and tail. The flat section is stable on boardslides, while the rocker optimizes press tricks and gives a nearly catch-free ride.Glass Impact plates:Provide lightweight anti-compression strength under the bindings to combat the abuse of hard landings.HotRod tech:A rod of fibreglass placed in the centreline of the nose and tail for higher ollies and nollies.Impact Core Matrix:A 40% wood composite material is impregnated with wood fibres to create a core that is super durable, environmentally friendly and smooth flexing.StraightBiax laminate:90 off-axis fibre configuration is torsionally forgiving and keeps the feel super playful.Impact base:An advanced extruded compound combines high molecular density and high abrasion resistance for added strength against abuse by rails and rocks.
The Shank is stuffed with a new piece of technology called the No Hang up Rocker, which is Romes answer to the Burton Nug Tech. The board has a 4-5cm length drop which allows for a true length, but with a shorter effective edge, which means for all mountain playful fun this board absolutely kills it. Packed full of carbon Pop Rods this board really enables the rider to have maximum fun, whilst still having a stable control. Features True Twin Shape Super Pop Core Matrix Straight Triax30 Laminate Sinter True Base Basalt Impact Plates Hotrods - Carbon Single Barrel Quickrip Sidecut Skatecore Profiling Butterout Transition Zones Glossary Super Pop Core MatrixThree zones of low-density wood with extended segments of poplar create a light, smooth transition of flex and a snappy reply of pop that is embedded in the boards like the Crossrocket, Shank, Agent Rocker, Lo-Fi Rocker, and Gold. StraightTriax30 LaminateThe laminate that covers all the bases from the park to all-mountain peaks, the 30-degree off-axis fibers set the personality of the board to flex into low speed butters and pop into high speed takeoffs. Provides some extra kick in a slash and maintains your style while getting creative on and off the trails. SinterTrue BaseDurable structure with wax absorbing traits that create a fast moving base that can hold up to the abuse of park lines and keep up your crew in tree lines. Basalt Impact PlatesDirectly under the bindings is the most vulnerable area of any snowboard. With extreme amounts of force being directed towards the baseplates, compression and stress needs to be eliminated and absorbed as much as possible. Made from Kevlar, Basalt or Glass, Impact Plates reduce compressions by 2 times. Hotrods - Carbon Single BarrelOne rod of preloaded energy in the nose and another in the tail that takes power from your bindings and snaps it through your turns and hits. Pure ollie and nollie power without unwanted torque. Quickrip SidecutAdvanced sidecut geometry giving a short playful feel at slower speeds and a longer fast, stable feel at higher speeds. The Mid-Board contact points end the running length at slow speeds and add grip at high speeds. Skatecore ProfilingTake stock skate lines from park-to-park. A softer profile in between the bindings and a stiffer nose and tail makes the board feel like a skate for turning and ollieing. Same tail-slide feel on and off the mountain. Butterout Transition ZonesSmooth as butta; this drawn out transition zone is a playful take on our classic design, creating a play-a-round freestyle board, guaranteed to fuel your snowboard addiction.
The Silbrg Jibbomat is a fun and forgiving, easy to turn and ride freestyle board that allows you to stomp those landings in the park or the backcountry, and slide safely on rails and boxes. However, thanks to Silbrg's ALD technology, the Jibbomat also provides a secure grip whenever you need it.Features:Twin ShapeLow Rise Rocker profileALD technologyFlex rating: 3 (1 = soft/6 = stiff)Structurn BaseSidecut Radius: 151 7.5m/154 7.6m/157W 7.8mWaist width: 151 248mm/154 249mm/157W 258mmTip/Tail Width: 151 292mm/154 295mm/157W 303mmGlossary:Rocker:The rise of the tip and tail away from the snow results in easier float in deeper snow, allowing quicker progression and more enjoyment in powder. It also gives a looser, more manoeuvrable feel, freeing up the contact points for less edge catching and more confidence. This works well across a variety of conditions, and different companies use this kind of profile to varying degrees depending on the intended use.ALD technology:Arranges the fibreglass material used in the laminates throughout the board in a completely new way to give the characteristics of both camber and rocker snowboards. ALD provides a reduced edge effect compared to ALD Pro, which makes it ideal for quick and easy progression.Structurn base:A fast, durable and easy to maintain base that doesn't require frequent tuning. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. *Please note that base colours are assorted, and therefore we can not request specific colours.
The Lib Tech Box Scratcher is an unashamed freestyle board for riders that consider the whole mountain as their playground. Great for freestyle all-mountain riding, this board features Lib's classic Banana/Magne Traction combo and a slightly wider waist. This combo provides solid grip, easier freestyle riding and end-to-end stability. It also uses Lib's Morning Wood Core and Power Transfer internal sidewalls for unbelievable stability at speed.Features:BTXTwin Jib geometryMorning Wood corePower Transfer Internal SidewallsWider waist widths Flex rating: 5 (1 = soft/10 = stiff)Glossary:BTX:Banana/Magne Traction combo. Rocker between the feet blended w/flat-to-mild camber to the contact points - Focuses pressure between the feet for easy turns and great hold on ice, and mild pressure at the tip and tail for unreal float and catch-free freestyle.Magne Traction:Conventional skis and snowboards have two contact points. Magne-Traction boards have seven and deliver better edge hold! Control and turn initiation come from under your feet, not a foot and a half to either side of your feet, so when your two outside contact points lose grip, you've still got five more to take over!Power Transfer Internal Sidewalls:The same futuristic power 90 pop technology from Lib's world record setting skateboards and power transfer spines only this time placed along the sidewall of the board to add control to the sandwich construction. Stronger, more pop, and more control.
The Lib Tech Box Scratcher is an unashamed freestyle board for riders that consider the whole mountain as their playground. Great for freestyle all-mountain riding, this board features Lib's classic Banana/Magne Traction combo and a slightly wider waist. This combo provides solid grip, easier freestyle riding and end-to-end stability. It also uses Lib's Morning Wood Core and Power Transfer internal sidewalls for unbelievable stability at speed. Features BTXTwin Jib geometryMorning Wood corePower Transfer Internal SidewallsWider waist widths Flex rating: 5 (1 = soft/10 = stiff) Glossary BTX:Banana/Magne Traction combo. Rocker between the feet blended w/flat-to-mild camber to the contact points ? Focuses pressure between the feet for easy turns and great hold on ice, and mild pressure at the tip and tail for unreal float and catch-free freestyle. Magne Traction:Conventional skis and snowboards have two contact points. Magne-Traction boards have seven and deliver better edge hold! Control and turn initiation come from under your feet, not a foot and a half to either side of your feet, so when your two outside contact points lose grip, you've still got five more to take over! Power Transfer Internal Sidewalls:The same futuristic power 90? pop technology from Lib's world record setting skateboards and power transfer spines only this time placed along the sidewall of the board to add control to the sandwich construction. Stronger, more pop, and more control.
Banana Tech reverses a snowboards pressure map. With Banana Tech your weight is shifted from your feet inward to the center of your board where balance is controlled. Some weight is still transferred to the tips and tails and full contact is maintained for control and stability but far less than is the case with tip-to- tail ski camber where the tips and tails are the focus of all weight distribution, making a board catchy and difficult to ride. This Banana Tech snowboard specific pressure map makes turns easy to initiate, is catch-free and forgiving, floats incredible in powder, and is unreal for jibbing and poppy freestyle fun. Ride a Banana! Features Banana Technologies and Magne-Traction (BTX) Twin geometries H-Pop core with banana specific core profile Power transfer internal sidewalls Too many awards to list TnT Base Flex: 4-6 (depending on size) Art by Mike Parillo
Banana Tech reverses a snowboards pressure map. With Banana Tech your weight is shifted from your feet inward to the center of your board where balance is controlled. Some weight is still transferred to the tips and tails and full contact is maintained for control and stability but far less than is the case with tip-to- tail ski camber where the tips and tails are the focus of all weight distribution, making a board catchy and difficult to ride. This Banana Tech snowboard specific pressure map makes turns easy to initiate, is catch-free and forgiving, floats incredible in powder, and is unreal for jibbing and poppy freestyle fun. Ride a Banana! Features Banana Technologies and Magne-Traction (BTX) Twin geometries H-Pop core with banana specific core profile Power transfer internal sidewalls Too many awards to list TnT Base Flex: 4-6 (depending on size) Art by Mike Parillo
The Happy Hour is a team driven freestyle board with a very distinct design. Using the Flat line Tweekends profile and the camber shaped pre loaded Carbon Ollie Bar construction you get more ride-able surface area for a more balanced ride, as well as pop and response closer to camber design snowboards. Yet it still manages to maintain a playful, less catchy feel because of the flat base profile. Features Stabby Twin Shape Flatline Tweekend Baseline Ollie Bar Barbon Web Glossary Tweekend BaselineA revolutionary tweek to the ends of our industry leading Baseline technology. By extending the Baseline rocker all the way out to the absolute ends of the board, new ride-able surface is unlocked, giving you a bigger, more stable platform to press, float and land on. Ollie BarThe Ollie bar is a totally new approach to adding pop to a snowboard. Built in place in a pre-loaded, cambered shape it solves the concern that rocker board dont have the pop camber board have.Made with a secret layup of carbon, Kevlar and urethane layers, the ollie bar is positioned in the center of the board between the binding inserts. Strong ollies and pressing power doesnt come from the tail alone. The backbone center section is actually more critical for smooth even pressure. You gotta try it to believe the pop. Carbon WebAlways improving the feel and energy return of our boards, the R+D group releases the CARBON WEB rider input/output system. Offered in two levels of sensitivity. Resulting in a more connected feedback loop from terrain to rider.
The Social is suitable for the rider that wants an easy to ride, soft and forgiving board that is tonnes of fun. Its design and shape also make it suitable for freestyle riders that want a rocker board for jibbing around on, and what makes it so appealing is the combination of V Rocker for playfulness and Jumper Cables with New Overbite edges for grip and control. So whether youre cruising the pistes or testing your skills in the park the social is all about having fun on the mountain. Features Flex Rating: 2 (1 - Softest / 10 - Stiffest) Double Chair Package V-Rocker Twin Shape Twin Flex Women's-Specific True Flex Fly Core Jumper Cables Scoop Overbite Frostbite Pro-Tip' Glossary Double Chair PackageWe begin where many competitors consider the top of the line. A great place to start, youll be riding the same boards as some of the best riders out there. V-RockerContinuous rocker between your feet and in front of your feet towards the tip and tail creates catch-free playfulness and improved float from peak to park. Frostbite Edges enhance power and grip, balancing the boards overall loose and forgiving feel. Twin ShapeThe shape is perfectly symmetrical for a balanced ride thats equally versatile when ridden regular or switch. Jib, spin, stomp, and butter with a greater balance of freestyle mobility and cat-like stability no matter which way you point it. Twin FlexThe flex is perfectly symmetrical from tip to tail for a balanced ride thats equally versatile regular or switch. Women's-Specific True FlexTrue Flex' optimizes women's board design to match the geometry and finesse of female riders. Torsional softness underfoot transitions to stabilizing zones between and outside your feet. The result is improved stability, effortless edge control, and energized pop in the tip and tail. Fly CoreOur classic tip to tail wood core, constantly improved upon in terms of flex, feel, pop, and strength. Jumper CablesJumper Cables on the NEW Process V-Rocker, NEW Dj Vu V-Rocker, Blunt, Hate, and Social are ultra-light carbon stringers that radiate energy outward from your feet towards the tip and tail. Beyond adding amplitude to your ollies, they also create more snap when powering through turns. For maximum flight, the Jumper Cables Hi-Voltage on the Joystick, Hero, Hero Limited, and Lip-Stick use carbonated rods for ultra-electrified pop and performance ScoopThis exaggerated tip and tail scooping turns up the edges for a looser, more forgiving feel that adds catch-free fun when riding everything from a knee-high box to neck-deep pow. Overbite FrostbiteThis evolution in edge tech gives you more fang with less bang by increasing the amount of Frostbite by up to 0.75mm. It doesnt sound like much, but the result is a huge increase in grip on hard, icy conditions while remaining smooth and catch-free. Exclusive to the Blender and Social. Pro-Tip'A tapered tip and tail thickness reduces swing weight for easier mobility.
The K2 Fling is part of K2's progression series of boards, and is aimed at the rider that likes to play on the piste and nail new tricks in the park. It has been built with a mid flex for easy manipulation that makes pressing and buttering a pleasure, and allows you to hit the park with confidence and learn some new moves. In addition, a twin shape and centred stance make the board handle as well in either direction, while Carbon matrix forks deliver power from your bindings to your contact points for firm grip and drive when darting around the mountain. Finally, a 4000 sintered base supplies some serious speed and gives you a board that'll let you progress your riding faster than you thought possible. Board Size 142. Weight Range 40-72kg.Board Size 146. Weight Range 40-72kg.Board Size 149. Weight Range 45-77kg.Board Size 153. Weight Range 54+kg.
The K2 Fling is a sweet board for riders that want to improve all aspects of their riding, from freestyle progression to powder riding. It features K2's Flatline base profile, which offers a balanced and smooth ride, delivers less edge catching for more confident riding, and floats easier in powder. Internally, the Fling has a women's specific Rhythm Core wrapped with Biax Glass and Carbon Web I fibres, which give it a flex that is both easy to manoeuvre but very stable at high speed. The Fling is finished off with a high-grade sintered 4000 base for consistent speed across all conditions.Features:Flatline technology base profileHybritaper constructionTwin shape w/centred stanceHyper Progressive sidecutRhythm coreBiax fibreglassCarbon Web I4000 Sintered BaseGlossary:Flatline technology:100% flat base profile that creates a supremely balanced, smooth ride for both aspiring and accomplished pros.Hybritaper construction:Features sidewalls along the running surface that flow into the nose and tail for low swing weight, optimized turn initiation and durability. Also tapers out the core at the tip and tail, and blends the tips into a thin sandwich removing excess material.Hyper Progressive sidecut:An infinite number of different radii are blended together flawlessly from mellow in the tips, to more aggressive in the centre. The result is a predictable feel that never hooks, response at high speeds and a smooth ride.Rhythm Core:Designed specifically for women, it uses a single species of pure wood w/proven flex, durability and snap.Biax:A classic structure laminate that provides the best smooth all-purpose performance.Carbon Web I:Brings the pop and snap of carbon closer to the bindings for maximum ollies and control.4000 Sintered base:One of the fastest natural base materials available, it is exceptionally durable absorbs wax deeper and retains it longer. *Please note that base colours may vary
The Burton Social is an immensely fun, forgiving riot stick that enables you to get the most fun out of your riding days. Suitable for all levels, the Social features Burton's V Rocker snowboard profile, which lifts the contact points from the snow making it virtually impossible to catch edges, and loosens up the tip and tail for agile freestyle progression. The V Rocker is complemented by Cruise Control Technology that upturns the tip and tail edges to help beginners progress, and make good riders even better. In addition, Frostbite Edges beneath your bindings extend out for extra edge grip and amazing hold in firmer conditions. Within the core you also get New Jumper Cables that radiate energy toward the tip and tail, which creates a lively feel that adds pop to your ollies and power through your turns.Board Size 138. Weight Range 32-56kg.Board Size 142. Weight Range 32-56kg.Board Size 147. Weight Range 36-59kg.Board Size 151. Weight Range 50-72kg.
The Salomon Drift Rocker is a fun freestyle Rocker board that is playful enough for park laps and jib sessions, but stable enough to handle faster riding and hard landings. This twin tip's Aspen core and Bi-axial fibreglass give it a very manoeuvrable flex that is perfect for freestyle, and Salomon's Royal Rubber in the sidewalls delivers chatter-free riding and added durability. It also features Salomon's combination of Rocker and Equalizer sidecut that gives you a forgiving and fun feel but is stable and grippy when carving.Features:True TwinEqualizer sidecutExtruded EG base w/Standard Stone finish and full edge bevel+BA MD constructionPres-sure Rocqualizer profileAspen Light coreRoyal Rubber Pads sidewallFlex Rating: 2 (1=most/5=least)Glossary:True Twin:Freestyle specific: Identical tip/tail lengths and shapes, symmetrical core profiling, flex and a centred binding stance.Equalizer sidecut:Uses 3 straight lines instead of a traditional sidecut. Distributes binding pressure more evenly along the edge of the board for hook-free turning and easy entry and exit into every turn.Extruded EG (Electra Galium) base:Extruded bases are the easiest to maintain and excel in park attacks and urban jibbing. They repair easily and when waxed, extruded base material will provide excellent performance. The Electra finish gives a turbocharged glide and the Galium strengthens impact resistance BA MD construction:BA MD (Bi-Axial Medium Density) fibreglass construction. Pres-sure Rocqualizer profile:The playfulness of pure reverse camber with regular kicks, combined with the edge grip of Equalizer.Aspen Light core:Full-length, lightweight Aspen wood w/high density birch strips for extra tough insert retention.Royal Rubber Pads:4mm soft Royal Rubber blocks inserted into the high pressure zones of the sidewalls dampen vibrations and mellows big impacts.
The Oh Yeah proved to be a popular choice last season due to the high fun factor and low price. Its the board that is easy to ride, yet carves well due to Salomons Equalizer sidecut. The construction includes Pressure Rocker and an easy press core to make trying out new moves more accessible and Royal Rubber inserts add great vibration dampening for a smooth ride. Any Beginners, experienced freestyler, or piste cruiser will love how much fun this is to ride. Features Flex Rating: 3 (1 Softest - 10 Stiffest) True Twin Shape Pres-Sure Rocker Profile Equalizer 3 Sidecut Aspen Strong core Glossary True TwinFreestyle specific: Identical tip/tail lengths and shapes, symmetrical core profiling, flex and a centered binding stance. Press-Sure RockerPure reverse Camber for a playful easy ride that's more forgiving and fun everywhere. Equalizer 3 SidecutOG Equalizers 3 straight lines evenly distribute pressure along your edge for easy edge hold even on a softer board. Aspen Strong coreCNC-selected high-density FSC certified wood strips for the inserts and rail zones results in improved impact resistance and a predictable flex from opening day to spring slush.
The Salomon OhYeah is a twin shaped Rocker board that is perfect for the rider that wants good times all the time. Suitable for beginners and pros alike, the Oh Yeah features an Aspen core wrapped in a forgiving yet lively Bi-axial fibreglass weave, that combine to give you an easy ride. This combination is also a real confidence booster as it makes turning easy and allows you to develop your freestyle skills in quick time. Finally, its Equalizer sidecut distributes pressure across the entire edge and complements the rocker shape perfectly, making the Oh Yeah perfect for the freestyle influenced all-mountain rider.Features:True TwinEqualizer SidecutExtruded EG base w/Standard Stone finish and full edge bevel+BA MD Easy Press constructionPres-sure Rocqualizer profileAspen Light coreRoyal Rubber Pads sidewallsFlex Rating: 1 (1=most/5=least)Glossary:True Twin:Freestyle specific: Identical tip/tail lengths and shapes, symmetrical core profiling, flex and a centred binding stance.Equalizer sidecut:Uses 3 straight lines instead of a traditional sidecut. Distributes binding pressure more evenly along the edge of the board for hook-free turning and easy entry and exit into every turn.Extruded EG (Electra Galium) base:Extruded bases are the easiest to maintain and excel in park attacks and urban jibbing. They repair easily and when waxed, extruded base material will provide excellent performance. The Electra finish gives a turbocharged glide and the Galium strengthens impact resistance BA MD Easy Press construction:BA MD (Bi-Axial Medium Density) fibreglass construction. Easy Press manhandles rails and ledges with a softer flex that never buckles. Pres-sure Rocqualizer profile:The playfulness of pure reverse camber with regular kicks, combined with the edge grip of Equalizer.Aspen Light core:Full-length, lightweight Aspen wood w/high density birch strips for extra tough insert retention.Royal Rubber Pads:4mm soft Royal Rubber blocks inserted into the high pressure zones of the sidewalls dampen vibrations and mellows big impacts.
The DC Lauri Pro is based on DC's most versatile board, the Tone. Specially designed for DC pro Lauri Heiskari, it strikes the perfect balance of flex and stability to let you ride park and powder without having to switch boards.Features:Stratus core w/Camber Core techRadius-2-FlatTrue base w/Structurn base structureQuadrax laminateAnti-Camber technologyFlex rating: 7 (1 = soft/10 = stiff)Glossary:Stratus Core:Vertically laminated 100% poplar wood core is powerful, lightweight, and maintains good pop.Camber Core tech:By adding a unique arch shaped profile to the wood core, the fibreglass takes on a completely new geometry. This arched fibreglass shape is integrated into the anti-camber zone of the board to give more pop and added resistance when flexing the tip and tail, and the stability of a traditional camber board.Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge.True Base w/Structurn base finish:A fast, durable and easy to maintain base that doesn't require frequent tuning. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier.Quadrax laminate:Four directions of glass fibres are woven tightly together, giving boards a smooth ride and stable feel with unbelievable power and control.Anti-Camber technology:The board is flat between the feet and curved away from the snow either side of the feet. The Lauri Pro has 4mm of Anti-Camber and a medium length flat spot that makes it fun and forgiving with the right balance of stability.
The DC Women's Ply is a new creation that has been built for DC progressive team riders. This easy to ride and extremely confidence-inspiring freestyle board features Lock & Load' construction, a new approach to regular camber, which draws on the pop of camber and adds in flat sections outside of the feet that load up the tail for mega ollie-pop. It also has a twin shape and slightly longer nose that keep you afloat in powder, while the 30% lighter flexalite tip and tail reduces swing weight for easy spinning. Based on just how well this board rides, we think the Ply will be very popular so get your hands on one whilst you can.Features:Lock and Load camberStratus coreFlexalite tipRadius-2-Flat techTrue base w/Structurn base finish64.20 bi-ax laminateFlex rating: 6 (1 = soft/10 = stiff)Glossary:Lock and Load camber:Uses traditional camber throughout the midsection of the board, then lengthens the traditional flat contact points to create a stable platform for locking on and loading up the tail like a skateboard.Stratus core:Vertically laminated 100% poplar wood core that is powerful and lightweight, and maintains good pop in the steeps, park or streets.Flexalite Tip:30% lighter than trad constructions, it allows for a better flex and helps reduce swing weight for more control on tricky presses.Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge.True Base w/Structurn base finish:A fast, durable and easy to maintain base that doesn't require frequent tuning. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier.64.20 bi-ax laminate:2 directions of glass fibres woven tightly together for a forgiving and torsionally flexible ride. Doesn't sacrifice strength or durability, and gives increased board control. *Please note that base colours are assorted, and therefore we can not request specific colours.
The DC Ply is a new creation that has been built for DC progressive team riders, including Mr Torstein Horgmo and co. This easy to ride and extremely confidence-inspiring freestyle board features Lock & Load' construction, a new approach to regular camber, which draws on the pop of camber and adds in flat sections outside of the feet that load up the tail for mega ollie-pop. It also has a twin shape and slightly longer nose that keep you afloat in powder, while the 30% lighter flexalite tip and tail reduces swing weight for easy spinning. Based on just how well this board rides, we think the Ply will be very popular so get your hands on one whilst you can.Features:Lock and Load camberStratus coreFlexalite tipRadius-2-Flat techTrue base w/Structurn base finish64.20 bi-ax laminateFlex rating: 6 (1 = soft/10 = stiff)Glossary:Lock and Load camber:Uses traditional camber throughout the midsection of the board, then lengthens the traditional flat contact points to create a stable platform for locking on and loading up the tail like a skateboard.Stratus core:Vertically laminated 100% poplar wood core that is powerful and lightweight, and maintains good pop in the steeps, park or streets.Flexalite Tip:30% lighter than trad constructions, it allows for a better flex and helps reduce swing weight for more control on tricky presses.Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge.True Base w/Structurn base finish:A fast, durable and easy to maintain base that doesn't require frequent tuning. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier.64.20 bi-ax laminate:2 directions of glass fibres woven tightly together for a forgiving and torsionally flexible ride. Doesn't sacrifice strength or durability, and gives increased board control. *Please note that base colours are assorted, and therefore we can not request specific colours.
The Space metal fantasy is a great board if you want to take your riding up a level or two, or if you just want something cruisey to mess around on whenever it suits. Built with a pre loaded rocker shape the SMF makes it easier to learn jib tricks so its a great choice for the rider that aspires to get into more freestyle riding. The construction also means the learning curve is accelerated because youll catch less edges and have more fun in the process. Great for beginners and expert freestyle riders alike. Features Urban FK camber typeFlat Kick techWDT engineered jib corePre-cured 420 fibreglass configurationHigh transparent extruded baseSublimated & silkscreened topsheetSilkscreened & die-cut base graphics360? steel edgesSilkscreened ABS bombproof sidewalls4x2 inserts Flex rating: 3 (1 = soft/10 = stiff) Glossary Urban FK camber type:Dual reverse camber FK jib and park machines. Whether you're in the streets on at the resort, they're pre-positioned for pressing and never hang up. Flat Kick tech:Tightens the profile radius that blends the shoulders of the board into the tip and tail height. On reverse camber boards these contact points are elevated and traditional tip and tail radii would make a board feel sluggish. Flat Kicks combined with elevated reverse camber contact points give the ideal tempo into turns, allowing you to have the shorter effective edge of a forgiving, easy to ride reverse camber board that is still responsive and quick edge-to-edge. WDT engineered jib core:Short for ?Wood Derived Technology, ' the patented process of pressure bonding wood composite material retains the classic feel of a full wood core board while increasing flex values. Engineered for freestyle, park, and street rail boards the WDT core has high elasticity characteristics surrounding low-density wood fibres. This balance provides lightweight, soft flexing boards, with a damp ride and dependable durability. Pre-cured 420 fibreglass configuration:Engineered to compliment the WDT core construction, the 420 configuration consists of 370 grams of e-glass in 0? direction and 50 grams of e-glass in 90? direction. It's pre-cured for consistency and exits the mould with a high yield of energy memory. High transparent extruded base:Features an altered molecular composition allowing more vibrant graphic options while maintaining the low maintenance and technical benefits of extrusion.
The Capita Space Metal Fantasy is a board capable of taking your riding progression through the roof, and with the help of the psychedelic space cats you will ride like never before! Using Capita's highly regarded Rocker profile and Flat Kicks tech tip and tail, you get a very forgiving and fun ride that works well for all types of riding from freestyle to powder. By lifting the contact points of the board you'll catch less edges and learn tricks faster, while the rocker shape will naturally provide more lift in powder snow. From aspiring beginner to expert jibber you can harness the Cats' laser beam stare and have a better time than you ever thought possible.Features:Urban FK camber typeFlat Kick techWDT engineered jib corePre-cured 420 fibreglass configurationHigh transparent extruded baseSublimated & silkscreened topsheetSilkscreened & die-cut base graphics360 steel edgesSilkscreened ABS bombproof sidewalls4x2 inserts Flex rating: 3 (1 = soft/10 = stiff)Glossary:Urban FK camber type:Dual reverse camber FK jib and park machines. Whether you're in the streets on at the resort, they're pre-positioned for pressing and never hang up.Flat Kick tech:Tightens the profile radius that blends the shoulders of the board into the tip and tail height. On reverse camber boards these contact points are elevated and traditional tip and tail radii would make a board feel sluggish. Flat Kicks combined with elevated reverse camber contact points give the ideal tempo into turns, allowing you to have the shorter effective edge of a forgiving, easy to ride reverse camber board that is still responsive and quick edge-to-edge.WDT engineered jib core:Short for Wood Derived Technology, ' the patented process of pressure bonding wood composite material retains the classic feel of a full wood core board while increasing flex values. Engineered for freestyle, park, and street rail boards the WDT core has high elasticity characteristics surrounding low-density wood fibres. This balance provides lightweight, soft flexing boards, with a damp ride and dependable durability.Pre-cured 420 fibreglass configuration:Engineered to compliment the WDT core construction, the 420 configuration consists of 370 grams of e-glass in 0 direction and 50 grams of e-glass in 90 direction. It's pre-cured for consistency and exits the mould with a high yield of energy memory.High transparent extruded base:Features an altered molecular composition allowing more vibrant graphic options while maintaining the low maintenance and technical benefits of extrusion.
Devun Walsh has been a professional snowboarder longer than most and knows exactly what makes an awesome board, so he needs a board that will absolutely meet his needs on the mountain. His board of choice uses DCs new Microcamber that blends small camber zones just outside the bindings with a flatter raised middle section. This gives the board big pop, energetic response and the stability Devun needs for putting down enormous landings and powerful riding. Every other feature of this board is focused at high level riding, from the radius to flat nose and tail for improved powder float to the 7200 Sintered Structurn Base for superior glide. This is simply and awesome snowboard to ride. Features Anti-Camber technologySlugger coreCamber core technologyRadius-2-Flat tech7200 Sintered Supreme base w/Structurn finishCarbon Quadrax laminateFlex rating: 7.5 (1 = soft/10 = stiff) Glossary Anti-Camber technology:The board is flat between the feet and curved away from the snow either side of the feet. The PBJ has the most anti-camber profile and shortest flat spot in the DC range for a more playful and forgiving ride. Slugger core:A solid poplar core with pre-bent ash hardwood stringers inserted that follow the board edge to increase durability, dampen vibration and stabilize the board. Camber Core tech:Adds an arch-shaped profile to the wood core giving the fibreglass a bridge-like geometry. This arched fibreglass shape is integrated into the anti-camber zone to give boards more pop and added resistance when flexing the tip and tail. Also gives anti-camber boards the stability of a trad camber board. Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge. 7200 Sintered Supreme base w/Structurn finish:A low friction base that absorbs wax easily and is durable for longer lasting tune-ups. It is also exceptionally fast, firm and super wear resistant. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. Carbon Quadrax laminate:4 directions of glass fibres are woven tightly together to give a board a smooth riding and stable feel. Dual carbon fibre bands run for tip-to-tail for maximum power and control. *Please note that base colours are assorted, and therefore we can not request specific colours.
The DC PBJ was one of our quickest sellers last season and is arguably one of the best value snowboards around as it performs as well as snowboards with much higher price tags. DC achieve this by keeping it simple, listening to what their riders want and making it fit for the purpose. That purpose being to make a super affordable rocker board that excels at freestyle progression, holds a mean turn, floats well in powder and is stable at speed. The PBJ is all you need to push your riding further and faster, whilst keeping money in the bank for a lift pass and beer.Features:Anti-Camber technologyAstro coreCamber core technologyRadius-2-Flat techTrue Base Optic w/Structurn base finish64.20 bi-ax laminateFlex rating: 6 (1 = soft/10 = stiff)Glossary:Anti-Camber technology:The board is flat between the feet and curved away from the snow either side of the feet. The PBJ has the most anti-camber profile and shortest flat spot in the DC range for a more playful and forgiving ride.Astro core:A wood-reinforced space age composite core creates a bombproof board that is designed to deliver freestyle performance.Camber Core tech:Adds an arch-shaped profile to the wood core giving the fibreglass a bridge-like geometry. This arched fibreglass shape is integrated into the anti-camber zone to give boards more pop and added resistance when flexing the tip and tail. Also gives anti-camber boards the stability of a trad camber board.Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge.True Base Optic w/Structurn base finish:A fast, durable and easy to maintain base that doesn't require frequent tuning. It is transparent for the most detailed graphics to be applied. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier.64.20 bi-ax laminate:2 directions of glass fibres woven tightly together for a forgiving and torsionally flexible ride. Doesn't sacrifice strength or durability, and gives increased board control.
The Biddy is DCs most versatile womens board designed to be ridden anywhere on the mountain. Its uses a friendlier flex that is both flattering to beginners and appealing to more advanced riders looking for a great value board to progress to the next level. It uses a Twin shape with a Radius to flat tip and tail so the board will float well riding powder, and a structurn base that is consistently quick in all conditions. If you want better performance for less cash the Biddy is a great choice. Features Astro Core w/Camber core tech Radius-2-Flat tech True base optic w/Structurn base finish 64.20 Bi-Ax laminate Flex rating - 5 (1 = soft/10 = stiff) Glossary Astro core:Wood reinforced space age composite core creates a bombproof board designed to deliver freestyle performance. Camber Core tech:By adding a unique arch shaped profile to the wood core, the fibreglass takes on a completely new geometry. This arched fibreglass shape is integrated into the anti-camber zone of the board to give more pop and added resistance when flexing the tip and tail, and the stability of a traditional camber board. Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge. True Base optic w/Structurn base finish:A fast, durable and easy to maintain base that doesn't require frequent tuning. This transparent version provides the canvas for detailed base graphic applications. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. 64.20 bi-ax laminate:2 directions of glass fibres woven tightly together for a forgiving and torsionally flexible ride. Doesn't sacrifice strength or durability, and gives increased board control.
The DC Ply is once again a great camber board for the year, using DCs lock and Load Technology. The only minor difference in this seasons, is that it is slightly stiffer making it even better at high speed. The Ply is able to be used for pretty much everything around the mountain. Its a great board for hitting the slopes with and also hitting the park hard all day. Once again the Plys all come with an awesome looking graphic. Features Lock and Load camberStratus coreFlexalite tipRadius-2-Flat techTrue base w/Structurn base finish64.20 bi-ax laminateFlex rating: 6 (1 = soft/10 = stiff) Glossary Lock and Load camber:Uses traditional camber throughout the midsection of the board, then lengthens the traditional flat contact points to create a stable platform for locking on and loading up the tail like a skateboard. Stratus core:Vertically laminated 100% poplar wood core that is powerful and lightweight, and maintains good pop in the steeps, park or streets. Flexalite Tip:30% lighter than trad constructions, it allows for a better flex and helps reduce swing weight for more control on tricky presses. Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge. True Base w/Structurn base finish:A fast, durable and easy to maintain base that doesn't require frequent tuning. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. 64.20 bi-ax laminate:2 directions of glass fibres woven tightly together for a forgiving and torsionally flexible ride. Doesn't sacrifice strength or durability, and gives increased board control. *Please note that base colours are assorted, and therefore we can not request specific colours.
The womens Ply is quite possible one of the most inspiring, fun and excellent value boards on the market. Built with DCs Lock and Load construction it offers the energetic feel of camber with less pressure at the contact points, meaning its a lot more forgiving when youre messing around, but challenging enough to last you a few seasons. It has a slightly longer nose than tail so it offers better float in powder, and the Flexalite tip and tail reduce swing weight for better agility. Suitable for beginners and pros alike. Features Lock and Load camberStratus coreFlexalite tipRadius-2-Flat techTrue base w/Structurn base finish64.20 bi-ax laminateFlex rating: 6 (1 = soft/10 = stiff) Glossary Lock and Load camber:Uses traditional camber throughout the midsection of the board, then lengthens the traditional flat contact points to create a stable platform for locking on and loading up the tail like a skateboard. Stratus core:Vertically laminated 100% poplar wood core that is powerful and lightweight, and maintains good pop in the steeps, park or streets. Flexalite Tip:30% lighter than trad constructions, it allows for a better flex and helps reduce swing weight for more control on tricky presses. Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge. True Base w/Structurn base finish:A fast, durable and easy to maintain base that doesn't require frequent tuning. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. 64.20 bi-ax laminate:2 directions of glass fibres woven tightly together for a forgiving and torsionally flexible ride. Doesn't sacrifice strength or durability, and gives increased board control. *Please note that base colours are assorted, and therefore we can not request specific colours.
The PBJ can best be described as a bargain board that is as accessible to beginners as it is to pros. Beginners will find this board encouraging to ride because its easy to manouvre so learning will be fast. And more advanced freestyle riders will love it because its easy to throw around on rails and fun to play on so trick progression will be quick. DC have managed to make a board that utilizes clever board shaping and attributes to make it one of the best value, most fun boards to ride out there. Features Anti-Camber technologyAstro coreCamber core technologyRadius-2-Flat techTrue Base Optic w/Structurn base finish64.20 bi-ax laminateFlex rating: 6 (1 = soft/10 = stiff) Glossary Anti-Camber technology:The board is flat between the feet and curved away from the snow either side of the feet. The PBJ has the most anti-camber profile and shortest flat spot in the DC range for a more playful and forgiving ride. Astro core:A wood-reinforced space age composite core creates a bombproof board that is designed to deliver freestyle performance. Camber Core tech:Adds an arch-shaped profile to the wood core giving the fibreglass a bridge-like geometry. This arched fibreglass shape is integrated into the anti-camber zone to give boards more pop and added resistance when flexing the tip and tail. Also gives anti-camber boards the stability of a trad camber board. Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge. True Base Optic w/Structurn base finish:A fast, durable and easy to maintain base that doesn't require frequent tuning. It is transparent for the most detailed graphics to be applied. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. 64.20 bi-ax laminate:2 directions of glass fibres woven tightly together for a forgiving and torsionally flexible ride. Doesn't sacrifice strength or durability, and gives increased board control.
The Mega is new board to the DC line up and best way to describe this board is a DC Ply snowboard on steroids. Taking the same Lock and Load technology and shaping used in the Ply, DC have souped up the Mega with the New Fresh Deck topsheet for more pop, and used a more durable high grade 7200 Sintered Structurn Base for faster riding. At this price, we think this is one of the steals of the season if you compare the features/performance to price ratio. Features Lock & Load Camber Stratus Core Flexalite Tip Radius 2 Flat 64.20 Bi-Ax Struction Base 7200 Sinterspeed Base Glossary Lock & Load Camber Longer flat sections at the nose and tail for more stability Stratus CorePoplar core for a light, snappy, responsive feel Flexalite Tip30% lighter than normal construction and added control on presses Radius 2 FlatFlat sections in the nose and tail give lift in the powder while maintaining edge control 64.20 Bi-Ax2 Directions of fiberglass for a loose skate like feeling Structurn BaseThe dimples break surface tension to provide a super fast base in all conditions 7200 Sinterspeed BaseLightning fast in all conditions
The MLF is still DCs go to traditional camber board for a lot of the team. The reason why its so popular is because it offers explosive pop and stability at speed and on landings. This season DC bring their new Fresh Deck Topsheet to the MLF that give the board an even poppier feel that you can only get from natural wood. In addition the MLF uses high end Quadrax glass for torsional stiffness, Radius to flat tech for better powder float and a high grade 7200 structurn base for maximum glide in all conditions. Features Traditional camberImpact coreRadius-2-Flat tech7200 Sintered Supreme base w/Structurn finishCarbon Quadrax laminateFlex rating: 7 (1 = soft/10 = stiff) Glossary Traditional camber:The slight arching upward curve in the middle of the snowboard. Camber elongates your effective edge and provides more power in your nose and tail. Boards pop harder and have more high speed turning stability. Impact Core:Lightweight, responsive and durable wood core made using ultralight poplar for pop and power, with ash hardwood under the bindings for superior impact resistance. Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge. 7200 Sintered Supreme base w/Structurn finish:A low friction base that absorbs wax easily and is durable for longer lasting tune-ups. It is also exceptionally fast, firm and super wear resistant. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. Carbon Quadrax laminate:4 directions of glass fibres are woven tightly together to give a board a smooth riding and stable feel. Dual carbon fibre bands run for tip-to-tail for maximum power and control.
The Ikka MLF is still DCs go to traditional camber board for a lot of the team. The reason why its so popular is because it offers explosive pop and stability at speed and on landings. This season DC bring their new Fresh Deck Topsheet to the MLF that give the board an even poppier feel that you can only get from natural wood. In addition the MLF uses high end Quadrax glass for torsional stiffness, Radius to flat tech for better powder float and a high grade 7200 structurn base for maximum glide in all conditions. Features Traditional camberImpact coreRadius-2-Flat tech7200 Sintered Supreme base w/Structurn finishCarbon Quadrax laminateFlex rating: 7 (1 = soft/10 = stiff) Glossary Traditional camber:The slight arching upward curve in the middle of the snowboard. Camber elongates your effective edge and provides more power in your nose and tail. Boards pop harder and have more high speed turning stability. Impact Core:Lightweight, responsive and durable wood core made using ultralight poplar for pop and power, with ash hardwood under the bindings for superior impact resistance. Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge. 7200 Sintered Supreme base w/Structurn finish:A low friction base that absorbs wax easily and is durable for longer lasting tune-ups. It is also exceptionally fast, firm and super wear resistant. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. Carbon Quadrax laminate:4 directions of glass fibres are woven tightly together to give a board a smooth riding and stable feel. Dual carbon fibre bands run for tip-to-tail for maximum power and control. *Please note that base colours are assorted, and therefore we can not request specific colours.
The PBJ can best be described as a bargain board that is as accessible to beginners as it is to pros. Beginners will find this board encouraging to ride because its easy to manouvre so learning will be fast. And more advanced freestyle riders will love it because its easy to throw around on rails and fun to play on so trick progression will be quick. DC have managed to make a board that utilizes clever board shaping and attributes to make it one of the best value, most fun boards to ride out there. Features Anti-Camber technologyAstro coreCamber core technologyRadius-2-Flat techTrue Base Optic w/Structurn base finish64.20 bi-ax laminateFlex rating: 6 (1 = soft/10 = stiff) Glossary Anti-Camber technology:The board is flat between the feet and curved away from the snow either side of the feet. The PBJ has the most anti-camber profile and shortest flat spot in the DC range for a more playful and forgiving ride. Astro core:A wood-reinforced space age composite core creates a bombproof board that is designed to deliver freestyle performance. Camber Core tech:Adds an arch-shaped profile to the wood core giving the fibreglass a bridge-like geometry. This arched fibreglass shape is integrated into the anti-camber zone to give boards more pop and added resistance when flexing the tip and tail. Also gives anti-camber boards the stability of a trad camber board. Radius-2-Flat tech:Features flat surfaces at the tip and tail tat provide lift in, powder, while the radius blends in perfectly with the sidecut to create effortless transitions form edge-to-edge. True Base Optic w/Structurn base finish:A fast, durable and easy to maintain base that doesn't require frequent tuning. It is transparent for the most detailed graphics to be applied. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. 64.20 bi-ax laminate:2 directions of glass fibres woven tightly together for a forgiving and torsionally flexible ride. Doesn't sacrifice strength or durability, and gives increased board control.
The Ride DHK has been built tough to withstand the abuse it will no doubt have thrown its way. Definitely not your typical kids board, The DHK is an all-mountain freestyle ripper that offers tons of pop and smooth stability, and features adult range upgrades that give it the performance and style required to launch kids into snowboarding stardom.
The K2 World Wide Weapon is K2s answer to the increasing freestyle market and its design is great for beginning freestyle riders to the most advanced jibbers. Whether youre a regular on the indoor scene or a seasonnaire addicted to freestyle. The added bonus is that the board is built with a P-tex bottom and top sheet so that if you take chunks out of it, you can fix it just as easy. Whether its heavy hand rails in the park or hitting your first box, the WWW will be the tool to help you improve youre jibbing. Features Jib Rocker base profile Jib Tip construction Twin shape w/centred stance Hyper Progressive sidecut W1 core Biax fibreglass P-Tex Top 2000 Extruded base Glossary Jib Rocker:80% Flat/20% Rocker w/just enough rise in the tip and tail to create a loose, buttery feel on all terrain. Contact points stay well off the snow until engaged, eliminating edge hook while maintaining fun pop. Jib Tip construction:Integrates a longer effective edge w/shorter nose and tail, allowing you to drop down 5cm in board size without losing the stability of a longer board. Perfecting jibs, butters, flips and spins has never been easier. Hyper Progressive sidecut:An infinite number of different radii are blended together flawlessly from mellow in the tips, to more aggressive in the centre. The result is a predictable feel that never hooks, response at high speeds and a smooth ride. W1 Core:Uses a single species of pure wood w/proven flex, durability and snap. Biax:A classic structure laminate that provides the best smooth all-purpose performance. 2000 Extruded base:Fast and durable, and easy to tune and repair. *Please note that base colours may vary
The K2 WWW is an excellent easy to ride board purpose built for the rider that does nothing but all out freestyle riding. It features K2's Jib Rocker profile, which makes the board virtually catch-free for confident trick progression and easy manoeuvrability. End to end the flex is playful yet the WWW is still stable at speed, while the centred stance and Jib Tip construction make it perfect for spins, riding rails and boxes, and anything else you can find to play on.Features:Jib Rocker base profileJib Tip constructionTwin shape w/centred stanceHyper Progressive sidecutW1 coreBiax fibreglassP-Tex Top2000 Extruded baseGlossary:Jib Rocker:80% Flat/20% Rocker w/just enough rise in the tip and tail to create a loose, buttery feel on all terrain. Contact points stay well off the snow until engaged, eliminating edge hook while maintaining fun pop.Jib Tip construction:Integrates a longer effective edge w/shorter nose and tail, allowing you to drop down 5cm in board size without losing the stability of a longer board. Perfecting jibs, butters, flips and spins has never been easier.Hyper Progressive sidecut:An infinite number of different radii are blended together flawlessly from mellow in the tips, to more aggressive in the centre. The result is a predictable feel that never hooks, response at high speeds and a smooth ride.W1 Core:Uses a single species of pure wood w/proven flex, durability and snap.Biax:A classic structure laminate that provides the best smooth all-purpose performance.2000 Extruded base:Fast and durable, and easy to tune and repair. *Please note that base colours may vary
The Ride Fever is the ideal board for experienced riders looking for a feature packed park board that is also versatile enough to handle the rest of the mountain and its varied terrain. Using a radial sidecut, the Fever makes reliable and consistent turns whatever the conditions, and the twin shape allows you to ride in either direction so you can blast down a powder line, then run a park line switch with no hassles. In addition, a lightweight, snappy core incorporates carbon Pop Stixs placed under the feet that give dramatically enhanced ollie potential for bigger airs and more spring. This is combined with a hybrid glass construction that wraps a lightweight wood core for increased stability at speed, yet a playful feel in the tip and tail for tricking around the mountain. Finally, for added durability you get a Cleave Edge that uses 50% more steel to withstand rail abuse, and Slimewall sidewalls to absorb impact and smooth out the ride on piste.BOARD LEVEL/TYPE:Women's Intermediate-Advanced/FreestyleSUITABILITY:Off-Piste 7/10. Piste 7/10. Park 9/10BOARD SIZE - BODY WEIGHT.144cm = 32-50kg147cm = 39-57kg150cm = 45-64kg153cm = 52-70kg
Mike Aho's surreal creations of discontent and nostalgic comedy provide a suiting faade for Ride's signature style, and represent the sixth of seven limited editions snowboards introduced over the past three seasons.For the best in freestyle antics, the DH2.6 from Ride features the latest Hybrid Twin board profile. Offering primo response, pop and landing stability, this unique twin shape utilizes micro-camber beneath the feet with a slight rise in the tip and tail for catch-free riding. Complete with all the key ingredients for a true Ride masterpiece, the DH2.6 also features Slimewalls, Pop Rods 2.0 and Membrain top sheet.Features:Hybrid Twin shape85A SlimewallsPop Rods 2.0Hybrid GlassThin ConGlossary:Hybrid Twin shape:This twin shape features micro-rocker in the tip and tail and a level micro-camber zone between the feet.85A Slimewalls:Virtually indestructible, forgiving and ductile sidewalls made using skate wheel urethane that smooth the interaction with the snow/wood/metal surfaces you may ride on by absorbing impacts rather than defending against them.Pop Rods 2.0:Made up of flat carbon rods that wrap a urethane slime core, they are strategically placed in the tip and/or tail to add pop without the stiffness generally associated w/snappy boards.Hybrid Glass:Ride's unique stitched glass designs are flatter and more consistent; therefore they are stronger w/no gaps or stretching as can be found in woven glass. Hybrid uses triaxial on top and biaxial on the base for balanced torsion and stiffness, and better response at speed.Thin Con:Thin construction with a tapered tip and tail that reduces swing weight, enhances tip flex and allows the sidewall to run past the effective edge.
The Ride Agenda is perfect for first-timers or freestyle riders on a tighter budget. It features Ride's Lowrize Rocker technology, which combines lifted contact points at the tip and tail with a flat section between the feet. This makes it stable at higher speeds, virtually catch-free and forgiving enough around the tip and tail to make learning fun, and progression quick and easy. It also uses Ride's Foundation Tuned Core and Biaxial glass to give the board its perfect mid flex, while the Thin Con construction delivers low swing weight for faster spins.Features:LowRize RockerThin ConPtex SidewallsFoundation Tuned coreBiaxial GlassFusion 1500 base4x4 insertsGlossary:LowRize Rocker:Features a rocker that just lifts the contact points out of the snow and a nearly flat zone under foot. This twin rockered shape offers a hook-free, playful ride great for cruising, slashing groomers and hitting up the park.Thin Con:Thin construction with a tapered tip and tail that reduces swing weight, enhances tip flex and allows the sidewall to run past the effective edge.Ptex Sidewalls:Responsive and smooth sidewall technology that is durable and strong.Foundation Tuned core:Tip-to-Tail wood core with proven durability that retains pop and flex.Cleave Edge:Nearly 50% more steel than Ride's standard edge, delivers unmatched resistance to edge cracking and can be de-tuned to a larger radii.Biaxial Glass:Ride's unique stitched glass designs are flatter and more consistent; therefore they are stronger w/no gaps or stretching as can be found in woven glass. Biaxial features 90 and 0 angles for a fun and forgiving feel.Fusion 1500 base:The industry standard, it's wax absorbing and easy to repair.
The Kink has been designed for park riders that want the most suitable board for out and out park riding, but want to pay less. A Twin Rocker shape make the Kink stable on big jump landings yet loose enough to really play around on. Its also very durable due to Slimewall sidewalls and Cleave edges so it can withstand numerous beatings. The Kink is one of the best value boards out there park riding. Features Flex Rating: 5 (1 - Softest / 10 - Stiffest) Twin Rocker Profile Park & Pipe Board Slimewall Sidewalls Glossary SLimewall SidewallsRides exclusive Slimewalls are forgiving and ductile, absorbing impacts rather than defending against them. Just like your skate wheels, the urethane in Slimewalls smoothes the interaction with the snow, wood or metal surfaces you may Ride on. On top of all that, these babies are virtually indestructible, the most durable sidewalls in snowboarding. Twin Rocker ProfileThis twin shape has minimal rocker featuring a long, stable flat zone that extends well beyond the inserts into the tip and tail.
The Ride Machete is a versatile freestyle performance board that rides everything. It features the LowRize Rocker, which combines slightly lifted contact points with a flat base between the feet to give a surfy feel when carving, less edge catching and better powder float. Inside, the Stella core blends Biaxial glass with Carbon Array 3 Stringers and Pop Rods 1.0 for greater edge response and extra pop in the nose and tail. Finally, the overbuilt Cleave edges and 85A Durometer Sidewalls add durability, strength and shock absorption, while a 4000 grade sintered base delivers consistent speed.Features:LowRize rockerPop Rods 1.0Thin Con85A SlimewallsCarbon Array 3Cleave EdgeBiaxial glassFusion 4000 base2x4 inserts Glossary:LowRize Rocker:Features a rocker that just lifts the contact points out of the snow and a nearly flat zone under foot. This twin rockered shape offers a hook-free, playful ride great for cruising, slashing groomers and hitting up the park.Pop Rods 1.0:Made up of flat carbon rods that wrap a urethane slime core, they are strategically placed in the tip and/or tail to add pop without the stiffness generally associated w/snappy boards.Thin Con:Thin construction with a tapered tip and tail that reduces swing weight, enhances tip flex and allows the sidewall to run past the effective edge.85A Slimewalls:Virtually indestructible, forgiving and ductile sidewalls made using skate wheel urethane that smooth the interaction with the snow/wood/metal surfaces you may ride on by absorbing impacts rather than defending against them.Carbon Array 3:Power distribution technology that provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channelled to the opposing contact point for max board control.Cleave Edge:Nearly 50% more steel than Ride's standard edge, delivers unmatched resistance to edge cracking and can be de-tuned to a larger radii.Biaxial Glass:Ride's unique stitched glass designs are flatter and more consistent; therefore they are stronger w/no gaps or stretching as can be found in woven glass. Biaxial features 90 and 0 angles for a fun and forgiving feel.Fusion 4000 base:A super fast and solid sintered base that is more durable, harder and faster than extruded.
Fantasy meets reality, as the Mythical Creature Collective team up for a true masterpiece. The DH2.7 is the last in a series of Limited Edition Artist Series boards and went to the far reaches of other realms to bring together in the triumphant finale.Designed for the ultimate freestyle riders, the DH2.7 features Ride's team-favorite Hybrid Twin shape. Perfectly concocted for primo response, pop and landing stability, this unique twin shape utilizes micro-camber beneath the feet with a slight rise in the tip and tail for catch-free freestyle riding. Brewed with the best of Ride's technologies, the DH2.7 has Slimewalls for durability and a dampened feel, Pop Rods 2.0 for extra liveliness, and a lightweight Membrain top sheet.Features:Hybrid Twin shapeTwin shape85A SlimewallsPop Rods 2.0Hybrid GlassThin ConGlossary:Hybrid Twin shape:This twin shape features micro-rocker in the tip and tail and a level micro-camber zone between the feet.85A Slimewalls:Virtually indestructible, forgiving and ductile sidewalls made using skate wheel urethane that smooth the interaction with the snow/wood/metal surfaces you may ride on by absorbing impacts rather than defending against them.Pop Rods 2.0:Made up of flat carbon rods that wrap a urethane slime core, they are strategically placed in the tip and/or tail to add pop without the stiffness generally associated w/snappy boards.Hybrid Glass:Ride's unique stitched glass designs are flatter and more consistent; therefore they are stronger w/no gaps or stretching as can be found in woven glass. Hybrid uses triaxial on top and biaxial on the base for balanced torsion and stiffness, and better response at speed.Thin Con:Thin construction with a tapered tip and tail that reduces swing weight, enhances tip flex and allows the sidewall to run past the effective edge.
Sleepy Stevens', Scott Stevens' is really good at stuff. Tramp skating is a breeze, he's wicked good at Frisbee and he's borderline famous for eating candy alone. This action packed lifestyle lead to another one of Scott's favorite hobbies - loggin' Zzzzz's. Ol' Sleepy gets more shut eye than a baby after breast milk. He can film serious skate edit with one eyed closed and has been stacking ground breaking video parts on his snowboard for years. Odds are he's your favorite snowboarder. If not, he's probably your favorite snowboarder's favorite snowboarder. Either way, we at the CAPiTA Super Corporation are proud to present the first ever Scott Stevens Pro Model. Inspired by the Ultrafear FK, this very special board features an upgraded construction with carbon fiber load bars for increased pop. This board is produced in extremely limited quantities for select retailers only. Find one if you can...holla atcha boi!! Features Die Cut Sidewalls with 1.5mm Dampening System Custom Weave E Class Fiberglass Configuration Wax Infused Rotation Sintered Speed Base Die Cut + Silkscreened Base Graphics PLT Topsheet Technology 360 Degree Steel Edges Aluminum Logo Base Inlay
The Whammy bar is all about expressing your freestyle flair and getting creative. Every feature on this board is designed for the rider that loves riding rails and park features, kickers and of course mucking around on piste and playing in the powder. This Twin V Rocker board has a softer flex for rail control and precise board manipulation, and has killer features Mid Spoon, Scoop, and rail ready edges. Out of the bag the Whammy is ready to shred. Features Flex Rating: 3 (1 - Softest / 10 - Stiffest) Hi-Speed Quad Package The Channel V-Rocker Twin Shape Twin flex Super Fly Core Dualzone' EGD%trade; Mid Spoon Rail Ready' Edge Tune Ellip Kicks Pro-Tip Infinite Ride Glossary Hi-Speed Quad PackageAdding performance, speed, and strength while reducing weight, with results even a novice will immediately appreciate. You will find many of our team riders on these boards. The ChannelThe Channel offers the quickest, easiest way to mount your bindings with the most stance options possible. Take control of your stance and your board like never before, micro-adjust your width and angles with ALL major binding formats including EST, Re:Flex', and Disc. M6 hardware means compatibility with all major binding companies, making it a choice for any rider V-RockerContinuous rocker between your feet and in front of your feet towards the tip and tail creates catch-free playfulness and improved float from peak to park. Frostbite Edges enhance power and grip, balancing the boards overall loose and forgiving feel. Twin ShapeThe shape is perfectly symmetrical for a balanced ride thats equally versatile when ridden regular or switch. Jib, spin, stomp, and butter with a greater balance of freestyle mobility and cat-like stability no matter which way you point it. Twin flexThe flex is perfectly symmetrical from tip to tail for a balanced ride thats equally versatile regular or switch. Super Fly CoreLightened up and loaded with pop, this vertical sandwich of hard and soft woods saves weight and improves snap and response. Further optimized for float in our freeride focused boards, and strength in our park-focused boards. Dualzone' EGD'The wood grain is positioned along the toe and heel edges on two continuous zones, perpendicular to the rest of the wood core, for consistent edge-hold and added strength. Mid SpoonA slight base convexity between your feet creates a super loose, catch-free feel that jibs without hang-ups and enhances foot control. The convexity also adds a bit of extra snap without sacrificing torsional softness perfect for poppin bigger ollies. Featured on the Whammy Bar Rail Ready' Edge TuneBeveled so you can slide without hang-ups, yet still get grip for slashing and jumping. Ellip KicksThis elliptical tip and tail shape promotes pop while providing added float and clearance when riding pow and variable conditions. Pro-TipA tapered tip and tail thickness reduces swing weight for easier mobility. Infinite RideThis Burton-exclusive technology allows us to maximize pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Springloaded, Rocker, or Camber, rest assured that with Infinite Ride' your board will maintain its flex, pop, and feel from the first day forward, season after season.
Burton Blunt Wide Snowboard gives you a great platform from which to enjoy your next day in the mountains. Fully rockered with twin shaping for equal dexterity riding either regular or switch, the Blunt Wide is built with Burton's bomber Fly core, Biax fiberglass, and lightweight 10:45 sidewalls. Features V-Rocker Flex Rating: 3 (1 Soft - 10 Stiff) Twin Sidecut Cruise Control Pro-Tip Fly Core Jumper Cables Biax Fiberglass Extruded Base Rail Ready Edge Tune Frostbite Edges Double Chair Package Glossary V-RockerContinuous rocker between your feet and in front of your feet towards the tip and tail creates catch-free playfulness and improved float from peak to park. Flex Rating (1 Soft - 10 Stiff)3, A medium flex for easy turn initiation and forgiving landingsTwin - The flex is perfectly symmetrical from tip to tail for a balanced ride that's equally versatile regular or switch. Twin SidecutIt's perfectly symmetrical for a balanced ride thats equally versatile when ridden regular or switch. Jib, spin, stomp, and butter with a greater balance of freestyle mobility and cat-like stability. Cruise ControlA catch-free combo with a softer flex and mellower edge tune - convex at the nose and tail for freestyle fun regular or switch. Pro-TipA tapered tip and tail thickness reduces swing weight for easier mobility.Wide - Select boards offer versions of their signature rides in wider platforms that are redesigned from the ground up for the larger-footed rider. Fly CoreBurton's classic tip to tail wood core, constantly improved upon in terms of ?ex, feel, pop, and strength Double Chair Package Burton begins where many other companies consider the top of the line. A great place to start, you'll be riding the same boards as some of the best riders out there.
The Ride DH is board that any freestyler can feel at home on once they strap in. Ride's most wanted traditional Camber twin tip freestyle board returns for another season because it keeps coming out on top in tests every year. The DH has an injection of Pop Rods 2.0 for added energy and pop without the stiffness for monster ollies. It also has Slimewall Sidewalls and Cleave Edges that add robust durability for repeated rail sessions, while Carbon Array 3 stringers add edge-to-edge speed and stability for putting down spins in the park. Finally, a quick 4000 sintered base complete what is surely still the ultimate freestylers choice! GLOSSARY -Slimewall Sidewalls: Skate-inspired Urethane sidewalls are forgiving and ductile, absorbing impacts for extra smooth riding and durability. Offered in 85A and 90A durameter urethane.Cleave Edge: Uses nearly 50% more steel than regular edges, delivering unmatched resistance to edge cracking. They can also be detuned to a larger radii.Carbon Array: Ride's power distribution technology enhances rider response by channelling rider input to the opposing contact point. Carbon strips running from underneath the bindings to the 4 contact points of the board provide more stability at speed, and more response through the turn. Available with 3, 5 and 7 rays.Board Size 151. Weight Range 45-69kg.Board Size 155. Weight Range 57-80kg.Board Size 157. Weight Range 59-82kg.Board Size 156W. Weight Range 59-82kg.Board Size 159W. Weight Range 64-86kg.
IntroThe Indoor Survival is one of the Capita team riders favorite boards, the Indoor Survival FK is the go-to board inside and outside of the park. These durable, responsive freestyle boards have become a customer favorite in the CAPiTA line because theyre proven to survive whatever you can give them. Features RFC Sustainable Core Special Blend EVO Tech Fiberglass Configuration 4 x 30mm Carbon Fiber Load Bars PLT Topsheet Technology Wax Infused Rotation Sintered Speed Base Silkscreened + Sublimation + Die Cut Combo Base Graphics 360 Degree Steel Edges Glossary RFC Sustainabke CoreThe RFC Sustainable core is the original eco friendly core. Its proven track record offers an environmentally conscious consumer a sustainable alternative without sacrificing any of the energy or stability expected from a CAPiTA. These cores have been reforestation certified by a leading environmental agency for nature and habitat sustainability and made with a single species poplar grain for a smooth, consistent ride. Extending from edge to edge and tip to tail the wood grain has no knots or irregularities enhancing response and providing a completely uniform flex pattern. Special Blend EVO Tech Fiberglass ConfigurationSpecial Blend Evo Tech is a wet lay-up process that uses a polyurethane based resin component requiring lower consumption of energy and yielding higher technical properties. This adhesion process improves the factorys working environment, as it does not contain some of the same harsh chemical characteristics used in resins at other factories around the world. This configuration is an optimum blend of biaxial glass weaves laminated in conjunction with dual black fleece additives on top of the core. Underneath the core, this glass is beefed up by multiple shape specific 30mm carbon fiber beams to increase power output.g Wax Infused Rotation Sintered Speed BaseThese bases are created by taking pellets of ultra-high-molecular-weight polyethylene and compressing them through heat and pressure. The miniscule spaces left behind absorb wax and allow for extended periods of high speed shredding as the wax wicks to the surface while you ride. This prevents your base from drying out and keeps the surface feeling freshly waxed throughout the day. Properly maintained sintered bases are fast, durable, and the overwhelming choice of pro snowboarders worldwide.
The Ride Crush is a freestyle junkies dream that excels in the park or on piste and features Ride's LowRize Rocker, which provides a solid and stable feel at speed but a more forgiving feel end-to-end because of the slight lift in the contact points. Next up, are Cleave edges that can withstand constant rail riding, while the legendary Slimewall sidewalls deliver a durable and smooth ride. Finally, it uses Ride's Membrain topsheet, which infuses urethane into fabric and weighs less than half of traditional topsheets.Features:LowRize RockerThin Con85A SlimewallsMembrainFoundation Tuned coreCleave EdgeBiaxial GlassFusion 1500 base2x4 insertsGlossary:LowRize Rocker:Features a rocker that just lifts the contact points out of the snow and a nearly flat zone under foot. This twin rockered shape offers a hook-free, playful ride great for cruising, slashing groomers and hitting up the park.Thin Con:Thin construction with a tapered tip and tail that reduces swing weight, enhances tip flex and allows the sidewall to run past the effective edge.85A Slimewalls:Virtually indestructible, forgiving and ductile sidewalls made using skate wheel urethane that smooth the interaction with the snow/wood/metal surfaces you may ride on by absorbing impacts rather than defending against them.Membrain:Weighing less than half of traditional plastic top sheets, it maintains a smooth feel by infusing Urethane into fabric. This process also allows Ride to push the boundaries when it comes to graphics by utilizing the textures and aesthetics associated w/a variety of fabrics.Foundation Tuned core:Tip-to-Tail wood core with proven durability that retains pop and flex.Cleave Edge:Nearly 50% more steel than Ride's standard edge, delivers unmatched resistance to edge cracking and can be de-tuned to a larger radii.Biaxial Glass:Ride's unique stitched glass designs are flatter and more consistent; therefore they are stronger w/no gaps or stretching as can be found in woven glass. Biaxial features 90 and 0 angles for a fun and forgiving feel.Fusion 1500 base:The industry standard, it's wax absorbing and easy to repair.
The K2 World Wide Weapon is K2s answer to the increasing freestyle market and its design is great for beginning freestyle riders to the most advanced jibbers. Whether youre a regular on the indoor scene or a seasonnaire addicted to freestyle. The added bonus is that the board is built with a P-tex bottom and top sheet so that if you take chunks out of it, you can fix it just as easy. Whether its heavy hand rails in the park or hitting your first box, the WWW will be the tool to help you improve youre jibbing. Features Jib Rocker base profile Jib Tip construction Twin shape w/centred stance Hyper Progressive sidecut W1 core Biax fibreglass P-Tex Top 2000 Extruded base Glossary Jib Rocker:80% Flat/20% Rocker w/just enough rise in the tip and tail to create a loose, buttery feel on all terrain. Contact points stay well off the snow until engaged, eliminating edge hook while maintaining fun pop. Jib Tip construction:Integrates a longer effective edge w/shorter nose and tail, allowing you to drop down 5cm in board size without losing the stability of a longer board. Perfecting jibs, butters, flips and spins has never been easier. Hyper Progressive sidecut:An infinite number of different radii are blended together flawlessly from mellow in the tips, to more aggressive in the centre. The result is a predictable feel that never hooks, response at high speeds and a smooth ride. W1 Core:Uses a single species of pure wood w/proven flex, durability and snap. Biax:A classic structure laminate that provides the best smooth all-purpose performance. 2000 Extruded base:Fast and durable, and easy to tune and repair. *Please note that base colours may vary
The Horrorscope is an excellent board for advanced level freestylers, and great for intermediates that want to step up their game in the park and learn some new tricks. The pre loaded rocker shape make it easy to press and so much fun to throw around, making it an easy going ride that holds up at speed. The Horrorscope is great for those hangover days when you just want to cruise around hitting features as you go. This board is all about the fun times. Features Urban FK camber typeFlat Kick techWDT engineered jib corePre-cured 420 fibreglass configurationHigh transparent extruded baseSublimated & silkscreened topsheetSilkscreened base graphics360? steel edgesSilkscreened ABS bombproof sidewalls4x2 inserts Flex rating: 3 (1 = soft/10 = stiff) Glossary Urban FK camber type:Dual reverse camber FK jib and park machines. Whether you're in the streets on at the resort, they're pre-positioned for pressing and never hang up. Flat Kick tech:Tightens the profile radius that blends the shoulders of the board into the tip and tail height. On reverse camber boards these contact points are elevated and traditional tip and tail radii would make a board feel sluggish. Flat Kicks combined with elevated reverse camber contact points give the ideal tempo into turns, allowing you to have the shorter effective edge of a forgiving, easy to ride reverse camber board that is still responsive and quick edge-to-edge. WDT engineered jib core:Short for ?Wood Derived Technology, ' the patented process of pressure bonding wood composite material retains the classic feel of a full wood core board while increasing flex values. Engineered for freestyle, park, and street rail boards the WDT core has high elasticity characteristics surrounding low-density wood fibres. This balance provides lightweight, soft flexing boards, with a damp ride and dependable durability. Pre-cured 420 fibreglass configuration:Engineered to compliment the WDT core construction, the 420 configuration consists of 370 grams of e-glass in 0? direction and 50 grams of e-glass in 90? direction. It's pre-cured for consistency and exits the mould with a high yield of energy memory. High transparent extruded base:Features an altered molecular composition allowing more vibrant graphic options while maintaining the low maintenance and technical benefits of extrusion.
The Sabotage is a brand new board designed to slay the park. Featuring new Flat out Camber and popster core profiling for maximum pop, and stability when landing kickers. It also boasts Salomons new EQ5 sidecut for more precision and control in all conditions and a sintered base for maximum glide. If you love park riding but see the whole mountain as an extension of the park then the Sabotage is a great choice. Features Flex Rating: 6 (1 Softest - 10 Stiffest) Flat Out Camber Profile Equalizer 5 sidecut Aspen Strong Core Royal Rumble Pads Glossary Flat Out Camber ProfileFlat profile loaded with camber under the feet for maximum stability and respone when you need it Equalizer 5 sidecutWith 5 straight lines, Equalizer 5 adds extra control and precision for a more responsive ride in all conditions. Aspen StrongCNC-selected high density FSC certified wood strips for the inserts and rail zonesresults in improved impact resistance and predictable flex from the beginning to end of the winter. Royal Rumble Pads4mm soft Royal Rubber (Royal, means extra thick) blocks inserted into the high pressure zones of our ABS sidewalls dampen vibration and mellows the big impacts.
The Silbrg Jibbomat is a fun and forgiving, easy to turn and ride freestyle board that allows you to stomp those landings in the park or the backcountry, and slide safely on rails and boxes. However, thanks to Silbrg's ALD technology, the Jibbomat also provides a secure grip whenever you need it.Features:Twin ShapeLow Raise Rocker profileALD technologyFlex rating: 3 (1 = soft/6 = stiff)Structurn BaseSidecut Radius: 151 7.5m/154 7.6m/157W 7.8mWaist width: 151 248mm/154 249mm/157W 258mmTip/Tail Width: 151 292mm/154 295mm/157W 303mmGlossary:Rocker:The rise of the tip and tail away from the snow results in easier float in deeper snow, allowing quicker progression and more enjoyment in powder. It also gives a looser, more manoeuvrable feel, freeing up the contact points for less edge catching and more confidence. This works well across a variety of conditions, and different companies use this kind of profile to varying degrees depending on the intended use.ALD technology:Arranges the fibreglass material used in the laminates throughout the board in a completely new way to give the characteristics of both camber and rocker snowboards. ALD provides a reduced edge effect compared to ALD Pro, which makes it ideal for quick and easy progression.Structurn base:A fast, durable and easy to maintain base that doesn't require frequent tuning. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. *Please note that base colours are assorted, and therefore we can not request specific colours.
Because it's got camber and that still counts. Because it's called the Burton Aftermath. Because it's got Squeezebox, our ultra-snappy core profile that brings more power and energy. Because it's basically a hyper-evolved Custom. Because it's aggressive and you ride fast. Because Christian Haller asked for it. Because it works! That's why. Features Hi-Speed Quad Package Twin-Like Shape Directional Flex Super Fly Core Dualzone EGD Triax Fiberglass Sintered Base Squeezebox Jumper Cables Hi-Voltage Frostbite Edges Pro-Tip Infinite Ride Glossary Hi-Speed Quad PackageAdding performance, speed, and strength while reducing weight, with results even a novice will immediately appreciate. You will find many of our team riders on these boards. The ChannelThe Channel offers the quickest, easiest way to mount your bindings with the most stance options possible. Take control of your stance and your board like never before, micro-adjust your width and angles with ALL major binding formats including EST, Re:Flex, and Disc. M6 hardware means compatibility with all major binding companies, making it a choice for any rider. Twin-Like ShapeGet the freestyle feel of a twin shape with subtle tweaks that improve float and control, including slight directional shaping, a slightly set-back stance, and a stiffer tail flex. Directional FlexThis versatile flex features increased pop in the tail and a more resilient nose that allows riders to easily maintain control and flow through all terrain and conditions. Super Fly CoreLightened up and loaded with pop, this vertical sandwich of hard and soft woods saves weight and improves snap and response. Further optimized for float in our freeride focused boards, and strength in our park-focused boards. Dualzone EGDThe wood grain is positioned along the toe and heel edges on two continuous zones, perpendicular to the rest of the wood core, for consistent edge-hold and added strength. Pro-TipA tapered tip and tail thickness reduces swing weight for easier mobility. Infinite RideThis Burton-exclusive technology allows us to maximize pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Springloaded, Rocker, or Camber, rest assured that with Infinite Ride your board will maintain its flex, pop, and feel from the first day forward, season after season.
The Gnu Park Pickle is a twin shaped Banana board for riders that want a freestyle board with a difference. Its BTX tech delivers easier catch-free freestyle riding, unreal powder float, unparalleled edge hold and improved steering. Its genius lies in the Asymmetric sidecut that balances the different turning mechanics required for heel and toe-side turns by giving the heel-side sidecut a slightly tighter radius than the toe-side. Its unique Asym Mervin AG/Aspen core, which blends genetically altered wood for lightweight strength, also allows for easier heel edge turns, as well as frontside spins for park supremacy. Finally the Pickle's durable 9900 sintered Alloy base delivers consistent speed in all conditions.Features:BTXAsym specific sidecutsTwin Asym geometrySintered base - fast and durableFlex rating: 5.5-6 depending on size (1 = soft/10 = stiff)Glossary:BTX:Banana/Magne Traction combo. Rocker between the feet blended w/flat-to-mild camber to the contact points - Focuses pressure between the feet for easy turns and great hold on ice, and mild pressure at the tip and tail for unreal float and catch-free freestyle.Magne Traction:Conventional skis and snowboards have two contact points. Magne-Traction boards have seven and deliver better edge hold! Control and turn initiation come from under your feet, not a foot and a half to either side of your feet, so when your two outside contact points lose grip, you've still got five more to take over!
Park and pipe riders looking to lighten the load and speed the spins, here's your savior. The Burton Super Hero Snowboard comes to the rescue with Burton's exclusive Nug Raduction construction that optimizes the build to allow you to size down in length without compromising float, pop or stability (Burton recommends going 4-5 cm shorter than your normal length). Want more? Light but bomber construction, The Channel mounting system, and a Flat Top profile that combines a flat spot between the feet with rocker at either end complete the package. Features Rocker Type:Flat Top - Rising rider or seasoned pro, keep your game on the level with the NEW Flat Top. A flat profile between the feet means stability, better balance, and continuous edge control. The tip and tail kick up with an early rise outside the feet for the catch-free and loose feeling youd expect from rocker. Flex:Flex Rating (1 Soft - 10 Stiff) - 3, A medium flex for easy turn initiation and forgiving landingsInfinite Ride - This Burton-exclusive technology allows for maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Springloaded, Rocker, or Camber, rest assured that with In?nite Ride your board will maintain its ?ex, pop, and feel from the ?rst day forward, season after season. Sidecut: Twin - It's perfectly symmetrical for a balanced ride thats equally versatile when ridden regular or switch. Jib, spin, stomp, and butter with a greater balance of freestyle mobility and cat-like stability. Shape:Nug Raduction - Optimizes every elementfrom waist width and ?ex pro?le to sidecut and running lengthletting you downsize up to 10cm from your normal board length. Light and lively, easy to throw around, surprisingly ?oaty, poppy, and stable at speedNug Raduction will change the way you look at board length.Scoop - This exaggerated tip and tail scooping turns up the edges for a looser, more forgiving feel.Pro-Tip - A tapered tip and tail thickness reduces swing weight for easier mobility. Core:Super Fly Core - Lightened up and loaded with pop, this vertical sandwich of hard and soft woods saves weight and improves snap and response.Dual Zone EGD - Engineered Grain Direction manipulates the angles and direction of wood grains in the core for superior edge-hold, response, and durability.Squeezebox - This improves performance through the balance of thicker, more powerful core sections with thinner, more ?exible sections. Rider energy is transferred outward from where it originates beneath the feet, energizing the tip and tail while making the board more stable and easily manipulated. Laminates:Triax Fiberglass - Versatile ?ex and response for everything from mini to mega shredJumper Cables Hi-Voltage - Ultra-light carbon stringers radiate energy outward from your feet towards the tip and tail. The result is greater pop and snap when powering through turns without sacri?cing the boards overall playful feel. For maximum ?ight, Jumper Cables Hi-Voltage use carbonated rods for ultra-electri?ed pop and performance. Sidewalls:10:45 Sidewalls - 10:45s extra-meaty, dual angle geometry results in better impact absorption and durability. Base:Sintered - Fast and durable base that holds wax well, 20% recycled content Edges:Frostbite Edges - Edges beneath your bindings extend out slightly for tremendous edgehold on hard, icy conditions. Powerful when you need them, playful when you dont, Frostbite Edges are hungry for hard-pack while remaining forgiving in softer conditions.Topsheet:20-30% Recycled Content Graphics:liminated printing chemicals - uses more eco-friendly inks then traditional printing methods Additional Features: Burton recommends downsizing 4-5 cm from your normal length.Binding Compatibility: The Channel - Gives you the ability to micro adjust your stance and is compatible with Burton EST, Re:Flex
The K2 Vandal snowboard is a real kids' favourite that features the same Jib Rocker tech as found on the incredibly fun K2 WWW adult board. Jib Rocker lifts the end of the snowboard up, making it more manoeuvrable, more fun and more likely to NOT catch an edge. The only thing you have to worry about is making sure that your little rippers don't show you up with their slope skills.
The Burton Hero is an all terrain freestyle Rocker board with a twin-like shape and a slightly longer nose than tail. It has a forgiving and fun V-Rocker shape and Frostbite edges that deliver an encouragingly playful ride and hold a mean edge. In addition Burton's new Squeezebox tech gives you more pop and ollie power without the stiffness, while Jumper Cables Hi-Voltage tech gives electrifying edge-to-edge quickness. Finally, it has Pro Tip construction and a high-grade sintered base for fast riding. Recommended Binding: Mission EST.Features:Hi-Speed Quad Features PackageThe ChannelV-Rocker profileTwin-like shapeTwin flexSuper Fly core w/Dualzone EGDTriax fibreglassSintered base10:45 sidewallsSqueezeboxJumper Cables Hi-VoltageScoopFrostbite edgesPro-TipInfinite RideGlossary:Hi-Speed Quad Features Package:The tech and features in this package add performance, speed and strength while reducing weight, with results even a novice will immediately appreciate.The Channel:Offers the ultimate bond between board and binding. Compatible with any Burton binding, this simple channel lets you fine-tune your stance width with mm micro-adjustability, then dial in your toe-to-heel centring, while rotating your angles.V-Rocker profile:Continuous rocker between your feet and in front of your feet towards the tip and tail creates catch-free playfulness and improved float from peak to park.Twin-Like shape:Whether riding regular or switch, get the freestyle feel of a twin shape with improved float and control throughvariable terrain and conditions.Twin flex:Perfectly symmetrical flex from tip to tail gives a balanced ride that's equally versatile riding regular or switch.Super Fly core:Lightened up and loaded w/pop, this vertical sandwich of hard and soft woods saves weight and improves snap and response.Dualzone EGD:The wood grain is positioned along the toe and heel edges on 2 continuous zones, perpendicular to the rest of the wood core, for consistent edge-hold and added strength.Triax fibreglass:Versatile flex and response for all types of riding across the mountain. Sintered base:Durable and highly porous base with added durability and superior wax absorption for greater overall glide.10:45 sidewalls:Extra meaty, dual angle geometry results in bomber impact absorption.Squeezebox:Thinner core sections underfoot transition to thicker more powerful areas between and outside your feet for a more stable board that can be powered up and manipulated w/less effort.Jumper Cables Hi-Voltage :Ultra light carbonated rods that radiate energy outward from your feet towards the tip and tail. The result is greater pop and performance, and more snap when powering through turns without sacrificing the overall playful feel.Scoop:This exaggerated tip and tail scooping turns up the edges for a looser, more forgiving feel that adds catch-free fun when riding everything from a knee-high box to neck-deep pow.Frostbite edges:Edges beneath your bindings extend out slightly for tremendous edge-hold on hard icy conditions. Powerful when you need them, playful when you don't. Pro-Tip:Tapered tip and tail thickness reduces swing weight for easier mobility.Infinite Ride:Burton exclusive tech allows them to maximise pop and strength by overbuilding the board, then putting it in a machine to break it in.
The Kink has been designed for park riders that want the most suitable board for out and out park riding, but want to pay less. A Twin Rocker shape make the Kink stable on big jump landings yet loose enough to really play around on. Its also very durable due to Slimewall sidewalls and Cleave edges so it can withstand numerous beatings. The Kink is one of the best value boards out there park riding. Features Flex Rating: 5 (1 - Softest / 10 - Stiffest) Twin Rocker Profile Park & Pipe Board Slimewall Sidewalls Glossary SLimewall SidewallsRides exclusive Slimewalls are forgiving and ductile, absorbing impacts rather than defending against them. Just like your skate wheels, the urethane in Slimewalls smoothes the interaction with the snow, wood or metal surfaces you may Ride on. On top of all that, these babies are virtually indestructible, the most durable sidewalls in snowboarding. Twin Rocker ProfileThis twin shape has minimal rocker featuring a long, stable flat zone that extends well beyond the inserts into the tip and tail.
The Burton Joystick has a twin-like shape and directional flex, and is Burton's premiere freestyle orientated all-mountain board. It features new SqueezeBox technology, which is complemented by its V-Rocker shape that delivers easy presses, less edge catching and improved powder float. It also has a SuperFly II Core fortified with a Carbon I-Beam for longitudinal stability, and Jumper Cables Hi Voltage tech for supreme edge-to-edge quickness and drive. The Joystick turns on a dime, slays the park and rides with ease both switch and regular in the powder.Features:Gondola Features PackageThe ChannelV-Rocker profileTwin-like shapeDirectional flexSuper Fly II core w/Dualzone EGDTriax fibreglass w/Carbon I-BeamSintered base10:45 sidewallsSqueezeboxFrostbite edgesPro-TipInfinite RideJumper Cables Hi-VoltageEllip KicksGlossary:Gondola Features Package:Set the benchmark w/boards that are lighter, faster and stronger for more air, quicker turns, and more fun no matter what the terrain or conditions.The Channel:Offers the ultimate bond between board and binding. Compatible with any Burton binding, this simple channel lets you fine-tune your stance width with mm micro-adjustability, then dial in your toe-to-heel centring, while rotating your angles.V-Rocker profile:Continuous rocker between your feet and in front of your feet towards the tip and tail creates catch-free playfulness and improved float from peak to park.Twin-Like shape:Whether riding regular or switch, get the freestyle feel of a twin shape with improved float and control throughvariable terrain and conditions.Directional flex:This versatile flex features increased pop in the tail and a more resilient nose that allows riders to easily maintain control and flow through all terrain and conditions.Super Fly II core:Stronger and lighter woods target specific areas of the core to provide pop, strength and reduced weight.Dualzone EGD:The wood grain is positioned along the toe and heel edges on 2 continuous zones, perpendicular to the rest of the wood core, for consistent edge-hold and added strength.Triax fibreglass:Versatile flex and response for all types of riding across the mountain.Carbon I-Beam:This ultralight carbon backbone increases pop and longitudinal snap. Sintered base:Durable and highly porous base with added durability and superior wax absorption for greater overall glide.10:45 sidewalls:Extra meaty, dual angle geometry results in bomber impact absorption.Squeezebox:Thinner core sections underfoot transition to thicker more powerful areas between and outside your feet for a more stable board that can be powered up and manipulated w/less effort.Frostbite edges:Edges beneath your bindings extend out slightly for tremendous edge-hold on hard icy conditions. Powerful when you need them, playful when you don't. Pro-Tip:Tapered tip and tail thickness reduces swing weight for easier mobility.Infinite Ride:Burton exclusive tech allows them to maximise pop and strength by overbuilding the board, then putting it in a machine to break it in.Jumper Cables Hi-Voltage :Ultra light carbonated rods that radiate energy outward from your feet towards the tip and tail. The result is greater pop and performance, and more snap when powering through turns without sacrificing the overall playful feel.Ellip Kicks:Elliptical tip and tail shape that promotes pop while providing added float and clearance when riding pow and variable conditions.
The Silb?rg Jibbomat is a fun and forgiving, easy to turn and ride freestyle board that allows you to stomp those landings in the park or the backcountry, and slide safely on rails and boxes. However, thanks to Silb?rg's ALD technology, the Jibbomat also provides a secure grip whenever you need it. Features Twin ShapeLow Rise Rocker profileALD technologyFlex rating: 3 (1 = soft/6 = stiff)Structurn BaseSidecut Radius: 151 - 7.5m/154 - 7.6m/157W - 7.8mWaist width: 151 - 248mm/154 - 249mm/157W - 258mmTip/Tail Width: 151 - 292mm/154 - 295mm/157W - 303mm Glossary Rocker:The rise of the tip and tail away from the snow results in easier float in deeper snow, allowing quicker progression and more enjoyment in powder. It also gives a looser, more manoeuvrable feel, freeing up the contact points for less edge catching and more confidence. This works well across a variety of conditions, and different companies use this kind of profile to varying degrees depending on the intended use. ALD technology:Arranges the fibreglass material used in the laminates throughout the board in a completely new way to give the characteristics of both camber and rocker snowboards. ALD provides a reduced edge effect compared to ALD Pro, which makes it ideal for quick and easy progression. Structurn base:A fast, durable and easy to maintain base that doesn't require frequent tuning. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. *Please note that base colours are assorted, and therefore we can not request specific colours.
The Joystick like its name implies is for making your day on the mountain all about fun games. This is Burtons highest performance V Rocker board and is well suited to the rider that loves every aspect of snowboarding, from blasting powder to riding every obstacle like it was a skate park. The deck combines V Rocker with materials like Triax glass and Carbon I beam to give it a lively and powerful, yet playful feel. And to maximise pop and responsiveness it gets Squeezebox core profiling with jumper cables Hi Voltage and Frostbite edges. Features Gondola Features Package The Channel V-Rocker profile Twin-like shape Directional flex Super Fly II core w/Dualzone EGD Triax fibreglass w/Carbon I-Beam Sintered base 10:45 sidewalls Squeezebox Frostbite edges Pro-Tip Infinite Ride Jumper Cables Hi-Voltage Ellip Kicks Glossary Gondola Features Package:Set the benchmark w/boards that are lighter, faster and stronger for more air, quicker turns, and more fun no matter what the terrain or conditions. The Channel:Offers the ultimate bond between board and binding. Compatible with any Burton binding, this simple channel lets you fine-tune your stance width with mm micro-adjustability, then dial in your toe-to-heel centring, while rotating your angles. V-Rocker profile:Continuous rocker between your feet and in front of your feet towards the tip and tail creates catch-free playfulness and improved float from peak to park. Twin-Like shape:Whether riding regular or switch, get the freestyle feel of a twin shape with improved float and control throughvariable terrain and conditions. Directional flex:This versatile flex features increased pop in the tail and a more resilient nose that allows riders to easily maintain control and flow through all terrain and conditions. Super Fly II core:Stronger and lighter woods target specific areas of the core to provide pop, strength and reduced weight. Dualzone EGD:The wood grain is positioned along the toe and heel edges on 2 continuous zones, perpendicular to the rest of the wood core, for consistent edge-hold and added strength. Triax fibreglass:Versatile flex and response for all types of riding across the mountain. Carbon I-Beam:This ultralight carbon backbone increases pop and longitudinal snap. Sintered base:Durable and highly porous base with added durability and superior wax absorption for greater overall glide. 10:45 sidewalls:Extra meaty, dual angle geometry results in bomber impact absorption. Squeezebox:Thinner core sections underfoot transition to thicker more powerful areas between and outside your feet for a more stable board that can be powered up and manipulated w/less effort. Frostbite edges:Edges beneath your bindings extend out slightly for tremendous edge-hold on hard icy conditions. Powerful when you need them, playful when you don't. Pro-Tip:Tapered tip and tail thickness reduces swing weight for easier mobility. Infinite Ride:Burton exclusive tech allows them to maximise pop and strength by overbuilding the board, then putting it in a machine to break it in. Jumper Cables Hi-Voltage :Ultra light carbonated rods that radiate energy outward from your feet towards the tip and tail. The result is greater pop and performance, and more snap when powering through turns without sacrificing the overall playful feel. Ellip Kicks:Elliptical tip and tail shape that promotes pop while providing added float and clearance when riding pow and variable conditions.
The K2 Playback is a great value board that rides exceptionally well for the money. It is perfect for anyone starting out, or a great freestyle twin board for someone that wants to save money for their lift pass. Its appeal to both newbies and freestylers lies in the construction and starts with Flatline Technology, a flat base construction that means less edge catching, easier manoeuvrability for freestyle tricks, and improved float in powder. The flex is also engineered to be playful, yet stable so you can confidently progress your bag of tricks and be stable at higher speeds.Features:Flatline technology base profileHybritaper construction Twin shape w/centred stanceHyper Progressive sidecutW1 coreBiax fibreglass 2000 Extruded baseGlossary:Flatline technology:100% flat base profile that creates a supremely balanced, smooth ride for both aspiring and accomplished pros.Hybritaper construction:Features sidewalls along the running surface that flow into the nose and tail for low swing weight, optimized turn initiation and durability. Also tapers out the core at the tip and tail, and blends the tips into a thin sandwich removing excess material.Hyper Progressive sidecut:An infinite number of different radii are blended together flawlessly from mellow in the tips, to more aggressive in the centre. The result is a predictable feel that never hooks, response at high speeds and a smooth ride.W1 Core:Uses a single species of pure wood w/proven flex, durability and snap.Biax:A classic structure laminate that provides the best smooth all-purpose performance.2000 Extruded base:Fast and durable, and easy to tune and repair. *Please note that base colours may vary
The Silb?rg Jibbomat is a fun and forgiving, easy to turn and ride freestyle board that allows you to stomp those landings in the park or the backcountry, and slide safely on rails and boxes. However, thanks to Silb?rg's ALD technology, the Jibbomat also provides a secure grip whenever you need it. Features Twin ShapeLow Rise Rocker profileALD technologyFlex rating: 3 (1 = soft/6 = stiff)Structurn BaseSidecut Radius: 151 - 7.5m/154 - 7.6m/157W - 7.8mWaist width: 151 - 248mm/154 - 249mm/157W - 258mmTip/Tail Width: 151 - 292mm/154 - 295mm/157W - 303mm Glossary Rocker:The rise of the tip and tail away from the snow results in easier float in deeper snow, allowing quicker progression and more enjoyment in powder. It also gives a looser, more manoeuvrable feel, freeing up the contact points for less edge catching and more confidence. This works well across a variety of conditions, and different companies use this kind of profile to varying degrees depending on the intended use. ALD technology:Arranges the fibreglass material used in the laminates throughout the board in a completely new way to give the characteristics of both camber and rocker snowboards. ALD provides a reduced edge effect compared to ALD Pro, which makes it ideal for quick and easy progression. Structurn base:A fast, durable and easy to maintain base that doesn't require frequent tuning. The Structurn finish uses a series of small dimples on the base to break water tension allowing the board to glide faster and turn easier. *Please note that base colours are assorted, and therefore we can not request specific colours.
The Capita Horrorscope is Capita's number one selling board for a reason! It's a well-priced, playful freestyle board that isn't too soft and isn't too stiff. Its reverse camber profile and Flat Kicks tech tip and tail give you the confidence to take your tricks to the next level and also help you float much better in powder. It also has the WDT Engineered Jib Core and bi-axial fibreglass that combine to give a lightweight and soft flexing board with a dependable and durable ride that won't fold. The Horrorscope is a versatile board, but its speciality is fast freestyle progression and fun times.Features:Urban FK camber typeFlat Kick techWDT engineered jib corePre-cured 420 fibreglass configurationHigh transparent extruded baseSublimated & silkscreened topsheetSilkscreened base graphics360 steel edgesSilkscreened ABS bombproof sidewalls4x2 inserts Flex rating: 3 (1 = soft/10 = stiff)Glossary:Urban FK camber type:Dual reverse camber FK jib and park machines. Whether you're in the streets on at the resort, they're pre-positioned for pressing and never hang up.Flat Kick tech:Tightens the profile radius that blends the shoulders of the board into the tip and tail height. On reverse camber boards these contact points are elevated and traditional tip and tail radii would make a board feel sluggish. Flat Kicks combined with elevated reverse camber contact points give the ideal tempo into turns, allowing you to have the shorter effective edge of a forgiving, easy to ride reverse camber board that is still responsive and quick edge-to-edge.WDT engineered jib core:Short for Wood Derived Technology, ' the patented process of pressure bonding wood composite material retains the classic feel of a full wood core board while increasing flex values. Engineered for freestyle, park, and street rail boards the WDT core has high elasticity characteristics surrounding low-density wood fibres. This balance provides lightweight, soft flexing boards, with a damp ride and dependable durability.Pre-cured 420 fibreglass configuration:Engineered to compliment the WDT core construction, the 420 configuration consists of 370 grams of e-glass in 0 direction and 50 grams of e-glass in 90 direction. It's pre-cured for consistency and exits the mould with a high yield of energy memory.High transparent extruded base:Features an altered molecular composition allowing more vibrant graphic options while maintaining the low maintenance and technical benefits of extrusion.
Forget the video games; jump headfirst into cold, snowy reality with the Burton Joystick Wide Snowboard and experience the highest performance V-Rocker board Burton makes. A super light Super Fly core with burly Triax glass weave and Carbon I-Beam for snap gives the Joystick Wide a life of its own that'll make you want to stay away from the TV. Features Rocker Type:V-Rocker - Continuous rocker between your feet and in front of your feet towards the tip and tail creates catch-free playfulness and improved float from peak to park. Flex:Flex Rating (1 Soft-10 Stiff) - 4, A medium flex for easy turning and forgiving freestyle moves. Infinite Ride - This Burton-exclusive technology allows for maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Springloaded, Rocker, or Camber, rest assured that with In?nite Ride your board will maintain its ?ex, pop, and feel from the ?rst day forward, season after season.Directional - Increased stiffness in the tail with a more flexible tip for easy float and better control in all terrain and snow conditions Sidecut:Twin-Like - Whether riding regular or switch, get the freestyle feel of a twin shape with improved ?oat and control through variable terrain and conditions.ShapeScoop - This exaggerated tip and tail scooping turns up the edges for a looser, more forgiving feel. Wide - Select boards offer versions of their signature rides in wider platforms that are redesigned from the ground up for the larger-footed rider.Ellip Kicks - An elliptical tip and tail shape that promotes pop and improves float and clearance in pow and variable snowPro-Tip - A tapered tip and tail thickness reduces swing weight for easier mobility. Core:Super Fly II Core - Stronger and lighter woods target speci?c areas of the core to provide pop, strength, and reduced weight - further optimized for ?oat in Burton's freeride focused boards, and strength in their park boards.Dual Zone EGD - Engineered Grain Direction manipulates the angles and direction of wood grains in the core for superior edge-hold, response, and durability.Squeezebox - This improves performance through the balance of thicker, more powerful core sections with thinner, more ?exible sections. Rider energy is transferred outward from where it originates beneath the feet, energizing the tip and tail while making the board more stable and easily manipulated. Laminates: Triax Fiberglass - Versatile ?ex and response for everything from mini to mega shredJumper Cables Hi-Voltage - Ultra-light carbon stringers radiate energy outward from your feet towards the tip and tail. The result is greater pop and snap when powering through turns without sacri?cing the boards overall playful feel. For maximum ?ight, Jumper Cables Hi-Voltage use carbonated rods for ultra-electri?ed pop and performance.Carbon I-Beam - This ultra-light carbon backbone increases pop and longitudinal snap. Sidewalls:10:45 Sidewalls - 10:45s extra-meaty, dual angle geometry results in better impact absorption and durability. Base:Sintered - Fast and durable base that holds wax well, 20% recycled content Edges:Frostbite Edges - Edges beneath your bindings extend out slightly for tremendous edgehold on hard, icy conditions. Powerful when you need them, playful when you dont, Frostbite Edges are hungry for hard-pack while remaining forgiving in softer conditions. Topsheet:20-30% Recycled Content Graphics:Art by Full Bleed Additional FeaturesGondola Package - Setting the benchmark with boards that are lighter, faster, and stronger for more air, quicker turns, and more fun no matter what the terrain or conditions Binding Compatibility:The Channel - Gives you the ability to micro adjust your stance and is compatible with Burton EST, Re:Flex and Disc bindings, as well as bindings from Forum, Drake, Union, Flow,