Ironmongery Direct | Intumescent & Fire Control

Sort By

Show

Intumescent & Fire Control

Available

Sealmaster Intumescent Packs -
2100mm - Sealmaster
Intumescents N30 - 30 Minute
Fire + Smoke Seal 2.1m Pack

Intumescent seals are a
practical,
well-established method
of achieving Fire
Resistance in designated
Fire Resisting Doors.
Heat from a fire causes
the intumescent material
to foam and swell, thus
filling the gap between
the door and frame and
preventing the flow of
hot gases and smoke.
However, not all such
seals are equal, and as
concern over litigation
grows, the thoughtful
specifier must examine
all the options to ensure
that the seal chosen for
each project really is
the most appropriate. As
the recognised leader in
intumescent seal
technology, Sealmaster
offers products of proven
performance and
demonstrable
cost-effectiveness,
which can be specified
with absolute
confidence./>Sealmaster Intumescents
N30 - 30 minute Fire +
Smoke Seal 2.1m Pack

Availability: In Stock

£30.70

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Maple 15x4x2150mm

• Unique elastomeric
dual fins provide
continuous acoustic and
smoke protection at
ironmongery points
•
Superior acoustic
performance - tested in
accordance with BS EN ISO
140-3:1995
•
Successfully tested for
fire and smoke
performance in accordance
with BS 476: Pt.22: 1987
and BS 476:
Pt.31.1:1983
•
Exceptionally low
frictional resistance for
ease of operation -
taking accessibility
requirements into
account
•
Successfully tested for
air tightness under BS
476: Pt31.1 ideal for
thermal
containment
• Highly
durable - 1, 000, 000
cycle tested
• Holds
BBA and Certifire
(CF330/CF341)
approval
• Sold in
packs of 5 x 2100mm
lengthsDS Acoustic Fire &
Smoke Seal Maple
15x4x2150mm

Availability: In Stock

£28.55

Available

Firemaster Intumescent Letter
Plate - Lorient Firemaster
Letterplate Gold

• Nylon brushes to
prevent vision through
letterplate
• Does
not reduce acoustic
performance

Availability: In Stock

£47.05

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Light Brown 10x4x2100mm

Availability: In Stock

£18.85

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Silver 15x4x2150mm

Availability: In Stock

£28.55

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Black 15x4x2150mm

Availability: In Stock

£28.55

Available

Fire & Smoke - 15 X 4mm X 2.1m
With Brush Pile - White Fire
And Smoke 15 X 4 X 2.1m With
Brush Pile Fire Rate 30
Minutes

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

White Fire and Smoke 15 x
4 x 2.1m with Brush Pile
Fire Rate 30
Minutes

Availability: In Stock

£14.80

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal White 20x4x2200mm

Availability: In Stock

£34.85

Available

Fire & Smoke - 20 X 4mm X 2.1m
With Brush Pile - Fire & Smoke
- 20 X 4 X 2.1m With Brush
Pile, Grey, Tube Qty 35

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance
Fire & Smoke - 20 x 4 x
2.1m with Brush Pile,
Grey, Tube qty 35

Availability: In Stock

£84.08

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Light Brown 15x4x2150mm

Availability: In Stock

£28.55

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Dark Brown 10x4x2100mm

Availability: In Stock

£18.85

Available

Firemaster Intumescent Letter
Plate - Lorient Firemaster
Letterplate Silver

• Nylon brushes to
prevent vision through
letterplate
• Does
not reduce acoustic
performance

Availability: In Stock

£42.20

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Cream 15x4x2150mm

Availability: In Stock

£28.55

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Silver 20x4x2200mm

Availability: In Stock

£34.85

Available

Fire & Smoke - 10 X 4mm X 2.1m
With Brush Pile - White
Intumescent Strip Fire & Smoke
10 X 4 X 2.1m With Brush Pile
- Fire Rate 30 Minute. Pack 75

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

White Intumescent Strip
Fire & Smoke 10 x 4 x
2.1m with Brush Pile -
Fire Rate 30 minute. Pack
75

Availability: In Stock

£68.00

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Cream 20x4x2200mm

Availability: In Stock

£34.85

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal White 10x4x2100mm

Availability: In Stock

£18.85

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Cream 10x4x2100mm

Availability: In Stock

£18.85

Available

Water Fire Extinguisher - 9
Litre Water Fire Extinguisher
Fire Control Equipment

----Water Fire
Extinguisher ----

The fire extinguishers we
offer here are
designed

Availability: In Stock

£73.51

Available

Dry Powder Fire Extinguisher -
2Kg Dry Powder Fire Control
Equipment

The fire extinguishers we
offer here are designed
for commercial and
industrial applications
but are also more than
adequate for home use. In
particular, when putting
together the range,
consideration was given
to products suited to
construction trades and
workshop/industrial
applications as the
majority of our customers
fall into this category.
We can of course advise
on suitable fire control
equipment for your
requirements.
Modern fire extinguishers
are designed to be
annually maintained by a
competent person, there
are numerous fire
engineers in most areas
of the UK who undertake
this work.2Kg Dry Powder
Fire Control
Equipment

Availability: In Stock

£52.21

Available

Dry Powder Fire Extinguisher -
9Kg Dry Powder Fire Control
Equipment

Availability: In Stock

£89.09

Available

Fire & Smoke - 10 X 4mm X 2.1m
With Brush Pile - Fire & Smoke
- 10 X 4 X 2.1m With Brush
Pile, Grey, Tube Qty 75

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Fire & Smoke - 10 x 4 x
2.1m with Brush Pile,
Grey, Tube Qty
75

Availability: In Stock

£68.00

Available

Sealmaster Intumescents -
1050mm - Sealmaster
Intumescent N60 - 60 Minute
Fire + Smoke Seal - 1050mm
Length

Intumescent seals are a
practical,
well-established method
of achieving Fire
Resistance in designated
Fire Resisting Doors.
Heat from a fire causes
the intumescent material
to foam and swell, thus
filling the gap between
the door and frame and
preventing the flow of
hot gases and smoke.
However, not all such
seals are equal, and as
concern over litigation
grows, the thoughtful
specifier must examine
all the options to ensure
that the seal chosen for
each project really is
the most appropriate. As
the recognised leader in
intumescent seal
technology, Sealmaster
offers products of proven
performance and
demonstrable
cost-effectiveness,
which can be specified
with absolute
confidence.Sealmaster
Intumescent N60 - 60
minute Fire + Smoke Seal
- 1050mm Length

Availability: In Stock

£21.53

Available

Fire & Smoke - 10 X 4mm X 2.1m
With Brush Pile - Cream
Intumescent Strip Fire & Smoke
10 X 4 X 2100mm With Brush
Pile - Fire Rate 30 Minute

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Cream Intumescent Strip
Fire & Smoke 10 x 4 x
2100mm with Brush Pile -
Fire Rate 30
minute

Availability: In Stock

£11.00

Available

Dry Powder Fire Extinguisher -
6Kg Dry Powder Fire Control
Equipment

Availability: In Stock

£81.00

Available

Fire & Smoke - 20 X 4mm X 2.1m
With Brush Pile - Grey Fire
And Smoke 20 X 4 X 2.1 With
Brush Pile - Fire Rate 60
Minutes

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance
Grey Fire and Smoke 20 x
4 x 2.1 with Brush Pile -
Fire Rate 60 minutes

Availability: In Stock

£33.10

Available

Fire & Smoke - 15 X 4mm X 2.1m
With Brush Pile - Fire & Smoke
- 15 X 4 X 2.1m With Brush
Pile, Grey, Pack Qty 50

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Fire & Smoke - 15 x 4 x
2.1m with Brush Pile,
Grey, Pack qty
50

Availability: In Stock

£64.00

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Light Brown 20x4x2200mm

Availability: In Stock

£34.85

Available

Fire & Smoke - 20 X 4mm X 2.1m
With Brush Pile - Brown Fire
And Smoke 20 X 4 X 2.1m With
Brush Pile - Fire Rate 60
Minutes. Pack 35

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance
Brown Fire and Smoke 20 x
4 x 2.1m with Brush Pile
- Fire Rate 60 minutes.
Pack 35

Availability: In Stock

£61.15

Available

Fire & Smoke - 10 X 4mm X 2.1m
With Brush Pile - Brown
Intumescent Strip Fire & Smoke
10 X 4 X 2.1m With Brush Pile
- Tube Quantity 75 - Fire
Rate 30 Minute

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Brown Intumescent Strip
Fire & Smoke 10 x 4 x
2.1m with Brush Pile -
Tube Quantity 75 - Fire
Rate 30 minute

Availability: In Stock

£68.00

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Black 20x4x2200mm

Availability: In Stock

£34.85

Available

Fire & Smoke - 10 X 4mm X 2.1m
With Brush Pile - Grey
Intumescent Strip Fire & Smoke
10 X 4 X 2100mm With Brush
Pile - Fire Rate 30 Minute

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Grey Intumescent Strip
Fire & Smoke 10 x 4 x
2100mm with Brush Pile -
Fire Rate 30
minute

Availability: In Stock

£11.00

Available

Intumescent Lock Protection -
Intumescent Lock Protection -
DIN LOCK Pack Of 5

Are you fitting locks to
fire doors? Fire Officers
are increasingly
specifying intumescent
lock protection to be
fitted, as it is an area
most likely to suffer
failure in a fire
situation - In the event
of a fire, the
intumescent rapidly
expands to provide
additional protection to
the lock cavity area,
helping maintain the
door's integrity - Tested
to BS 476 Pt 20/22 to
FD60 - Simply insert
along the sides of the
lock case - Can be easily
trimmedIntumescent Lock
Protection - DIN LOCK
Pack of 5

Availability: In Stock

£19.90

Available

Intumescent Lock Protection -
Intumescent Lock Protection -
SASHLOCK Pack Of 5

Availability: In Stock

£18.90

Available

Intumescent Lock Protection -
Intumescent Lock Protection -
DIN LOCK Pack Of 5

Availability: In Stock

£17.90

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 15x4x2100mm DK
Brown

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£32.50

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 15x4x2100mm Lt
Brown

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£32.50

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 20x4x2100mm DK
Brown

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£41.15

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 20x4x2100mm Lt
Brown

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£41.15

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 15x4x2100mm Black

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£32.50

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 15x4x2100mm Maple

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£32.50

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 20x4x2100mm Black

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£41.15

Available

Intumescent Economy Letter
Plate - Intum. 60 Minute
Letter Plate Standard 304mm
X 70mm Polished Gold

To retain the integrity
of FD30 and FD60 fire
resisting doors use these
fire rated letter plates.
Tested to BS476 Part
20/22 The letter plates
we offer are visibly
similar to common letter
plates with hidden
intumescent material
providing an easy way of
retaining the lock and
achieving fire
protection. Designed to
fit doors from 44mm to
54mm thick by means of an
adjustable centre sleeve
connecting inside to out.
Excellent sealing and
robust enough for
applications such as
hostels or student
accommodation.Intum. 60
minute Letter Plate
Standard 304mm x 70mm
Polished Gold

Availability: In Stock

£24.75

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 20x4x2100mm White

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£41.15

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 15x4x2100mm Cream

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£32.50

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 15x4x2100mm Silver

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£32.50

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 15x4x2100mm White

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£32.50

Available

Intumescent Economy Letter
Plate - Intumescent 60 Minute
Letter Plate Standard 304mm X
70mm Silver Cover

To retain the integrity
of FD30 and FD60 fire
resisting doors use these
fire rated letter plates.
Tested to BS476 Part
20/22 The letter plates
we offer are visibly
similar to common letter
plates with hidden
intumescent material
providing an easy way of
retaining the lock and
achieving fire
protection. Designed to
fit doors from 44mm to
54mm thick by means of an
adjustable centre sleeve
connecting inside to out.
Excellent sealing and
robust enough for
applications such as
hostels or student
accommodation.Intumescent
60 minute Letter Plate
Standard 304mm X 70mm
Silver Cover

Availability: In Stock

£21.75

Available

Intumescent Economy Letter
Plate - Intum. 60 Minute
Letter Plate Standard 304mm
X 70mm Polished Chrome

Availability: In Stock

£39.90

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 20x4x2100mm Maple

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£41.15

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 20x4x2100mm Cream

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£41.15

Available

LV40 Air Transfer Grille -
LV40 Air Transfer Grill
225x150mm

• For use in doors and
walls
• 60 minute
fire rating
•
Excellent air flow for
silent

Availability: In Stock

£43.42

Available

LV40 Air Transfer Grille -
LV40 Air Transfer Grill
150x150mm

• For use in doors and
walls
• 60 minute
fire rating
•
Excellent air flow for
silent

Availability: In Stock

£35.60

Available

LV40 Air Transfer Grille -
LV40 Air Transfer Grill
225x75mm

• For use in doors and
walls
• 60 minute
fire rating
•
Excellent air flow for
silent

Availability: In Stock

£37.55

Available

LV40 Air Transfer Grille -
LV40 Air Transfer Grill
250x250mm

• For use in doors and
walls
• 60 minute
fire rating
•
Excellent air flow for
silent

Availability: In Stock

£54.92

Available

LV40 Air Transfer Grille -
LV40 Air Transfer Grill
300x225mm

• For use in doors and
walls
• 60 minute
fire rating
•
Excellent air flow for
silent

Availability: In Stock

£58.05

Available

LV40 Air Transfer Grille -
LV40 Air Transfer Grill
300x300mm

• For use in doors and
walls
• 60 minute
fire rating
•
Excellent air flow for
silent

Availability: In Stock

£64.42

Available

Finesse Acoustic Smoke & Fire
Seal - Finesse Acoustic Smoke
& Fire Seal 20x4x2100mm Silver

• Superior acoustic
performance meeting the
requirements of approved
document E
•
Successfully

Availability: In Stock

£41.15

Available

LVC Circular Air Transfer
Grille - LVC Circular Air
Transfer Grill 98mm Diameter

• For use in doors and
walls
• 60 minute
fire rating
•
Excellent air flow for
silent

Availability: In Stock

£29.43

Available

Sealmaster Intumescents -
1050mm - Sealmaster
Intumescent Plugs - Pack Of 15

Availability: In Stock

£15.35

Available

LVC Circular Air Transfer
Grille - LVC Circular Air
Transfer Grill 198mm Diameter

• For use in doors and
walls
• 60 minute
fire rating
•
Excellent air flow for
silent

Availability: In Stock

£45.10

Available

Fire & Smoke - 20 X 4mm X 2.1m
With Brush Pile - White Fire
And Smoke 20 X 4 X 2.1m With
Brush Pile - Fire Rate 60
Minutes. Pack 35

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance
White Fire and Smoke 20 x
4 x 2.1m with Brush Pile
- Fire Rate 60 minutes.
Pack 35

Availability: In Stock

£61.15

Available

Fire & Smoke - 15 X 4mm X 2.1m
With Brush Pile - Fire & Smoke
- 15 X 4 X 2.1m With Brush
Pile, Black, Qty 50

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Fire & Smoke - 15 x 4 x
2.1m with Brush Pile,
Black, Qty 50

Availability: In Stock

£64.00

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Silver 10x4x2100mm

Availability: In Stock

£18.85

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Black 10x4x2100mm

Availability: In Stock

£18.85

Available

Fire & Smoke - 15 X 4mm X 2.1m
With Brush Pile - White Fire
And Smoke 15 X 4 X 2.1m With
Brush Pile Fire Rate 30
Minutes. Pack 50

Availability: In Stock

£64.00

Available

Sealmaster Intumescent Packs -
2100mm - Sealmaster
Intumescent IMN 30 / 60 Minute
Double Door Blade - 2.1m Pack
(only The Blade Part As
Indicated)

Availability: In Stock

£42.75

Available

Fire & Smoke - 20 X 4mm X 2.1m
With Brush Pile - Fire & Smoke
- 20 X 4 X 2.1m With Brush
Pile, Black, Tube Qty 35

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance
Fire & Smoke - 20 x 4 x
2.1m with Brush Pile,
Black, Tube qty 35

Availability: In Stock

£84.08

Available

LVC Circular Air Transfer
Grille - LVC Circular Air
Transfer Grill 148mm Diameter

• For use in doors and
walls
• 60 minute
fire rating
•
Excellent air flow for
silent

Availability: In Stock

£38.83

Available

LVC Circular Air Transfer
Grille - LVC Circular Air
Transfer Grill 123mm Diameter

• For use in doors and
walls
• 60 minute
fire rating
•
Excellent air flow for
silent

Availability: In Stock

£34.38

Available

Fire & Smoke - 20 X 4mm X 2.1m
With Brush Pile - Cream Fire
And Smoke 20 X 4 X 2.1 With
Brush Pile - Fire Rate 60
Minutes

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance
Cream Fire and Smoke 20 x
4 x 2.1 with Brush Pile -
Fire Rate 60 minutes

Availability: In Stock

£21.80

Available

Fire & Smoke - 15 X 4mm X 2.1m
With Brush Pile - Cream Fire
And Smoke 15 X 4 X 2.1m With
Brush Pile Fire Rate 30
Minutes

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Cream Fire and Smoke 15 x
4 x 2.1m with Brush Pile
Fire Rate 30
Minutes

Availability: In Stock

£14.80

Available

Fire & Smoke - 15 X 4mm X 2.1m
With Brush Pile - Brown Fire
And Smoke 15 X 4 X 2.1m With
Brush Pile Fire Rate 30
Minute. Pack 50

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Brown Fire and Smoke 15 x
4 x 2.1m with Brush Pile
Fire Rate 30 minute. Pack
50

Availability: In Stock

£64.00

Available

Sealmaster Intumescent Packs -
2100mm - Sealmaster
Intumescent IMP 30 / 60 Minute
Double Door Wiper - 2.1m Pack
(only The Wiper Part As
Indicated)

Availability: In Stock

£43.00

Available

Fire & Smoke - 10 X 4mm X 2.1m
With Brush Pile - Brown
Intumescent Strip Fire & Smoke
10 X 4 X 2100mm With Brush
Pile - Fire Rate

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Brown Intumescent Strip
Fire & Smoke 10 x 4 x
2100mm with Brush Pile -
Fire Rate

Availability: In Stock

£11.00

Available

Sealmaster Intumescents -
1050mm - Sealmaster
Intumescents N30 - 30 Minute
Fire + Smoke Seal - 1050mm
Length

Intumescent seals are a
practical,
well-established method
of achieving Fire
Resistance in designated
Fire Resisting Doors.
Heat from a fire causes
the intumescent material
to foam and swell, thus
filling the gap between
the door and frame and
preventing the flow of
hot gases and smoke.
However, not all such
seals are equal, and as
concern over litigation
grows, the thoughtful
specifier must examine
all the options to ensure
that the seal chosen for
each project really is
the most appropriate. As
the recognised leader in
intumescent seal
technology, Sealmaster
offers products of proven
performance and
demonstrable
cost-effectiveness,
which can be specified
with absolute
confidence.Sealmaster
Intumescents N30 - 30
minute Fire + Smoke Seal
- 1050mm length

Availability: In Stock

£15.35

Available

Fire & Smoke - 20 X 4mm X 2.1m
With Brush Pile - Black Fire
And Smoke 20 X 4 X 2.1 With
Brush Pile - Fire Rate 60
Minutes

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance
Black Fire and Smoke 20 x
4 x 2.1 with Brush Pile -
Fire Rate 60 minutes

Availability: In Stock

£33.10

Available

Fire & Smoke - 20 X 4mm X 2.1m
With Brush Pile - Brown Fire
And Smoke 20 X 4 X 2.1m With
Brush Pile - Fire Rate 60
Minutes

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance
Brown Fire and Smoke 20 x
4 x 2.1m with Brush Pile
- Fire Rate 60
minutes

Availability: In Stock

£21.80

Available

Fire & Smoke - 15 X 4mm X 2.1m
With Brush Pile - Black Fire
And Smoke 15 X 4 X 2.1m With
Brush Pile Fire Rate 30
Minutes

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Black Fire and Smoke 15 x
4 x 2.1m with Brush Pile
Fire Rate 30
Minutes

Availability: In Stock

£14.80

Available

Fire & Smoke - 20 X 4mm X 2.1m
With Brush Pile - White Fire
And Smoke 20 X 4 X 2.1m With
Brush Pile - Fire Rate 60
Minutes

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance
White Fire and Smoke 20 x
4 x 2.1m with Brush Pile
- Fire Rate 60
minutes

Availability: In Stock

£21.80

Available

Fire & Smoke - 10 X 4mm X 2.1m
With Brush Pile - Black
Intumescent Strip Fire & Smoke
10 X 4 X 2100mm With Brush
Pile - Fire Rate 30 Minute

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Black Intumescent Strip
Fire & Smoke 10 x 4 x
2100mm with Brush Pile -
Fire Rate 30
minute

Availability: In Stock

£11.00

Available

Fire & Smoke - 10 X 4mm X 2.1m
With Brush Pile - Fire & Smoke
- 10 X 4 X 2.1m With Brush
Pile, Black, Tube Qty 75

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Fire & Smoke - 10 x 4 x
2.1m with Brush Pile,
Black, Tube qty
75

Availability: In Stock

£68.00

Available

Fire & Smoke - 15 X 4mm X 2.1m
With Brush Pile - Grey Fire
And Smoke 15 X 4 X 2.1m With
Brush Pile Fire Rate 30
Minutes

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Grey Fire and Smoke 15 x
4 x 2.1m with Brush Pile
Fire Rate 30
Minutes

Availability: In Stock

£14.80

Available

Sealmaster Intumescent Packs -
2100mm - Sealmaster
Intumescent N60 - 60 Minute
Fire + Smoke Seal - 2.1m Pack

Availability: In Stock

£43.00

Available

Sealmaster Intumescents -
1050mm - Sealmaster
Intumescent IMN 30 / 60 Minute
Double Door Blade - Length
1050mm (only The Blade Part As
Indicated)

Intumescent seals are a
practical,
well-established method
of achieving Fire
Resistance in designated
Fire Resisting Doors.
Heat from a fire causes
the intumescent material
to foam and swell, thus
filling the gap between
the door and frame and
preventing the flow of
hot gases and smoke.
However, not all such
seals are equal, and as
concern over litigation
grows, the thoughtful
specifier must examine
all the options to ensure
that the seal chosen for
each project really is
the most appropriate. As
the recognised leader in
intumescent seal
technology, Sealmaster
offers products of proven
performance and
demonstrable
cost-effectiveness,
which can be specified
with absolute
confidence.Sealmaster
Intumescent IMN 30 / 60
minute Double Door Blade
- length 1050mm (only the
blade part as indicated)

Availability: In Stock

£21.37

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Maple 10x4x2100mm

Availability: In Stock

£18.85

Available

Fire & Smoke - 10 X 4mm X 2.1m
With Brush Pile - White
Intumescent Strip Fire & Smoke
10 X 4 X 2100mm With Brush
Pile - Fire Rate 30 Minute

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

White Intumescent Strip
Fire & Smoke 10 x 4 x
2100mm with Brush Pile -
Fire Rate 30
minute

Availability: In Stock

£11.00

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal White 15x4x2150mm

Availability: In Stock

£28.55

Available

Sealmaster Intumescents -
1050mm - Sealmaster
Intumescent IMP 30 / 60 Minute
Double Door Wiper - 1050mm
Length (only The Wiper Part As
Indicated)

Intumescent seals are a
practical,
well-established method
of achieving Fire
Resistance in designated
Fire Resisting Doors.
Heat from a fire causes
the intumescent material
to foam and swell, thus
filling the gap between
the door and frame and
preventing the flow of
hot gases and smoke.
However, not all such
seals are equal, and as
concern over litigation
grows, the thoughtful
specifier must examine
all the options to ensure
that the seal chosen for
each project really is
the most appropriate. As
the recognised leader in
intumescent seal
technology, Sealmaster
offers products of proven
performance and
demonstrable
cost-effectiveness,
which can be specified
with absolute
confidence.Sealmaster
Intumescent IMP 30 / 60
minute Double Door Wiper
- 1050mm length (only the
wiper part as indicated)

Availability: In Stock

£21.53

Available

60-Minute Intumescent Air
Transfer Vents & Covers -
60-Minute Intumescent Block
225mm X 75mm

Cover sizes are the
aperture size that they
are designed to cover
i.e. order the same size
cover as the intumescent
block. Order 2 covers per
intumescent block.

Ventilation including
air-conditioning,
ductwork or simply
cutting holes for
ventilation within
buildings can contravene
British Standards when
installed into fire doors
or compartment walls. One
answer comes in the form
of an intumescent block
which allows air to flow
through under normal
conditions but closes
under its own expansion
when exposed to a fully
developed fire.

The large range of square
and rectangular vents we
offer are available for
prompt dispatch direct
from the factory ensuring
both strict batch control
and compliance with
stringent manufacturing
standards.
By design the dampers
offer low maintenance
having no moving parts
hence no need for regular
maintenance apart from
inspection to ensure they
have not been damaged.
For an air transfer
grille that also offers
smoke control please
contact our customer
services team.

Ventilation Grille Covers

Our range of ventilation
covers offer an excellent
robust 'face fit' option
complementing the
intumescent air transfer
fire block range.

The pressed steel covers
are 'zinctec' coated
before painting to a
satin silver finish.
Covers can also be
supplied to match any BS
or RAL colour reference.
Please contact our
customer services team
with your enquiries.
Covers are promptly
shipped direct from the
factory and are supplied
drilled for screws (not
supplied).
As the illustration
indicates the intumescent
block must be bedded in
with intumescent
mastics.60-Minute
Intumescent Block 225mm x
75mm

Availability: In Stock

£37.99

Available

Fire & Smoke - 15 X 4mm X 2.1m
With Brush Pile - Brown Fire
And Smoke 15 X 4 X 2.1m With
Brush Pile Fire Rate 30 Minute

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

Brown Fire and Smoke 15 x
4 x 2.1m with Brush Pile
Fire Rate 30
minute

Availability: In Stock

£14.80

Available

Fire Only - 20 X 4mm X 2.1m
Plain - Intumescent Strip Fire
Only 20 X 4 X 2.1m Plain 60
Min Strip Light Timber

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance

You can combine two
different strips to
achieve a 1 hour
ratingIntumescent Strip
Fire Only 20 x 4 x 2.1m
Plain 60 min strip Light
Timber

Availability: In Stock

£29.00

Available

DS Acoustic Fire & Smoke Seals
- DS Acoustic Fire & Smoke
Seal Dark Brown 20x4x2200mm

Availability: In Stock

£34.85

Available

Fire Only - 15 X 4mm X 2.1m
Plain - Intumsecent Strip Fire
Only - 15 X 4 X2.1m Plain
,Black - Tube Quantity 75

Strip sizes 10 x 4mm and
15 x 4mm are 30 minute
rated and strip size 20 x
4mm is 60 minute rated.
The 15mm width is the
popular choice or doorset
manufacturers who prefer
the size due to its
'belts and braces' way of
getting through fire
tests. The leading brand
fire resisting doors are
fitted with the 15mm
size, one strip for 30
minute doors and 2 strips
running parallel, but
approx 6mm apart, plus
one brush and one plain
where smoke seals are
required around the door
to achieve FD60 status.
Additionally, factory
doorset manufacturers use
this size as it has
enabled them to use one
size cutter for either
FD30 or FD60 doors,
albeit set up
differently. The Fire
Only strip is plain,
whereas the Fire & Smoke
has a brush. All brushes
are black with no
frustrating plastic fin,
reducing noise levels and
resistance
Intumsecent Strip Fire
Only - 15 x 4 x2.1m Plain
, Black - Tube Quantity
75

Availability: In Stock

£78.00

Available

60 Minute Glazing Seal For
Glazed Screens & Fire Doors -
System 90+ 60 Minute Glazing
Seal For Glazed Screens And
Fire Doors. Size 27mm X 27mm -
White

Coming from Lorient this
is a spec-led product.
Works well and is easy to
use. Size 27mm x 27mm.
Fire Rating 60 minutes*
(used with Liner 'L')
Standard BS476:22. A true
pedigree performer being
similar, but much better
in our opinion than the
'monolux channel' shape.
System 90 Plus carries
test evidence in both
doors and screens. Unlike
monolux the product is
strong and provides a
choice of colour sight
lines. Used in
conjunction with liner L
this is a competent
performer with broad test
evidence.System 90+ 60
Minute Glazing Seal for
Glazed Screens and Fire
Doors. Size 27mm x 27mm -
White

Availability: In Stock

£37.73

Available